Re: [WT] Rattle can paint...
Here's the pricing from tower paint - it may have changed in the last 6
months.
Cost is $16.95 per can for 1-2 of each color, $14.95 for 3-5 of one
color and $12.95 for 6 or more of one
By
Greg Bryant <greg.bryant@...>
·
#149740
·
|
Re: diameter of headlight hole in jeep mb 1945
Alex, just a thought here, by the time you go rebuild the
smaller 5 inch headlight holes you might first try
buying another war grill ?
I see them several times each year at the Military Swap meets
on
By
aussierob2@...
·
#149739
·
|
Re: [WT] Rattle can paint...
Are you sure the pumpkin color wasn't their "autumn wheat"? I've seen
it where it had faded to a nice pumpkin color.
Try the attached link and enter Willys with the '59 year and you'll see
autumn
By
Greg Bryant <greg.bryant@...>
·
#149738
·
|
Re: [WT] diameter of headlight hole in jeep mb 1945
Hi Alex,
If you want to go with a new MB grill, then look at WillysAcres.com. THey carry one for $100 I think. Not sure what you could do to make your light holes smaller, but the MB lights are, I
By
Chris Lange <bullseye@...>
·
#149737
·
|
Re: [WT] 43 CJ or MB
Yep, that's a Ford script jeep. Willys did the same thing on the back of their jeep until the govt told them it was a war, and they shouldn't be advertising their product in such a manner.
The
By
Chris Lange <bullseye@...>
·
#149736
·
|
diameter of headlight hole in jeep mb 1945
hello,
the p.o. at one point decided to install standard headlights and in so
doing went ahead and cut up the grille to allow them to fit. not a
great idea, but maybe it was at the time.
i would like
By
alexande1r <VLLAS@...>
·
#149735
·
|
Re: Wagon Bumper Rechroming
Hi Kyle,
i just had the front and rear bumpers for my 1950 Willys Jeepster
straightened and rechromed by Denver Bumper Works
http://www.denverbumper.com/pricebook.html
They did an outstanding job
By
curt_rxr <curt_rxr@...>
·
#149734
·
|
1947 CJ2A Top Bow Storage
Did all 1947 CJ2A bodies have the top bow storage on the side and on
the windshield frame????
By
willysx1 <rstewart65@...>
·
#149732
·
|
Re: [WT] Rattle can paint...
Blake,
You might want to try Classic Willys Mailing List
http://autos.groups.yahoo.com/group/CWML/
They are interested in correct restorations and may have this type of
information
Ric
By
Richard N. Meagley Sr.
·
#149731
·
|
Re: [WT] Jeep: Steel Soldier coming to WOSU in central Ohio!
That's great. This is an excellent documentary.
Ric -.
Toledo, Ohio
Home of the World Famous JeepR
http://MightyMo.org
1948 - CJ2A L134 - #149488 - Mighty Mo
1948 - CJ2A L134 - #156174 - Ole
By
Richard N. Meagley Sr.
·
#149730
·
|
Re: [WT] 43 CJ or MB
If it was 'Script' it was produced in '42, unless an older tub was unearthed in a warehouse.Willys used their block stencil type lettering in the same location on their tubs. The War
By
RJ Kanary <rjkanary@...>
·
#149729
·
|
Jeep: Steel Soldier coming to WOSU in central Ohio!
Thanks to "Alysia" at PBS affiliate WOSU in Columbus, OH I have learned
that "Jeep: Steel Solider" will air under the guise of "Ohio War
Stories". The program will be broadcast this coming Thursday,
By
Bob Moledor
·
#149728
·
|
Re: [WT] 50 willys pu
Are you selling it?
t1924tt <t1924tt@...> wrote: I just purchased a 50 pu. It won"t idle. It is 6 volt, stock with
what looks like a new carb. Any suggestions?
By
karen graves <thyrmustang@...>
·
#149727
·
|
Re: [WT] Rattle can paint...
Thanks for the reply Robert and SF. I've looked at several websites
that I have saved over time for the color code for the pumpkin
orange color and can't find it. I think Willys called it
By
Blake Reynolds
·
#149726
·
|
Re: [WT] Rattle can paint...
You know you can have a rattle made at any auto paint shop. They can look up the color and give you the cans you want.
SF
By
SF <sf@...>
·
#149725
·
|
Re: [WT] 43 CJ or MB
Script jeep had the Ford F scripted into all the parts. Yours most likely was done in this manner.
DOD frowned on any manufacturer advertising, and made Ford stop the practice.
I have heard that
By
DJ <DJURSS@...>
·
#149723
·
|
Re: [WT] 1947 CJ2A Top Bow Storage
yes
*** See what's new at http://www.aol.com
By
bobcj2a@...
·
#149733
·
|
50 willys pu
I just purchased a 50 pu. It won"t idle. It is 6 volt, stock with
what looks like a new carb. Any suggestions?
By
t1924tt <t1924tt@...>
·
#149724
·
|
Re: [WT] pitman arm installation question...
David,
I've found three different recommendations from three different
sources: "heavy gear oil" "90wt," and "140wt."
I didn't want to run the risk of seepage even thought the unit is now
sealed
By
willystruck226
·
#149722
·
|
Re: [WT] Wagon Bumper Rechroming
Kyle,
I have an extra set of gauges, let me know and I can send you some pics if your intrested.
Steve
'50 4wd Wagon 327 SBC
Topeka, KS
US Navy Senior Chief
Kyle
By
Steven Wyer <wyersteven@...>
·
#149721
·
|