In a message dated 10/22/98 7:53:38 AM Central Daylight Time,
stoper@... writes:
<< Then I'll need to cut off (sorry
restorers) the front part of my Willys frame and weld on the Mustang frame.
I'll
have to adjust the width of the Mustang frame to fit. >>
I asked my father in-law about putting the Mustang II setup in his old
Pontiac. It sounds to me like they kept the Pontiac frame and added
just the control arms, etc which were pulled off a junker. The frame
was boxed in and the crossmember was moved (due to the motor I think).
This sounds to me like it would be easier to do than getting all the
body mounts etc. to work with the Mustang frame.
--
=======================================================================
Jeff Gent, jeffgent@... FoJ#0019 KC7PVZ
-----------------------------------------------------------------------
I'm not an engineer, but I play one at work
-----------------------------------------------------------------------
'84 V65 Sabre -- Hondaline fairing and Krauser
Hardbags
'62 Willys Wagon -- painfully slow frame up in progress
'82 Honda Civic -- 190K miles and going strong
=======================================================================
