In a message dated 10/18/98, 9:22:27 AM, WillysTech@... writes:
<<
Ok, I could use some measurements, if anyone is willing to make a
couple quick ones. I'm trying to figure out if the FC ones will work.
NOthing too detailed is needed quite yet. I really just need to know
how far out from the bed it is to the mounting surface.
Matt, Sorry it took me so long to reply but I've been a little busy. I
measured the distance from the bed to the outside edge of the tire carrier and
it was 8 3/4". If your going to make a tire carrier, make sure that it has
the proper clearance for whatever tires and rims you are running. My truck is
running 235/75R15s and the tire clears ok but much larger and I would be
rubbing on the fender and bed rail. I believe rim specification (backspacing)
would be just as critical as the tire size. Sometime in the past the previous
owner moved the tire carrier forward 1 1/2" and down 1 1/4". I think he did
this so he would have better visibility over the tire through the side-view
mirror. If you need more specific measurement let me know. I was thinking an
old brake drum would be a good start for a homemade tire carrier.
Rick S.
PS. I use the tire carrier as a storage space for some tow cables. Coiled up
they fit over the carrier and the tire holds them in place.
