My 54' wagon got a manual saginaw from a 67' impala, the kit was from 4 Wheelers supply in Phx. It had the bolt on plate to be welded to the frame, two spicer u-joints, and the tie rod kit. Had to find my own steering box, and had the steering shaft turned down to fit the spicer joints. Was convinced to up-grade after the bell crank linkage failed while moving off road..
-----Original Message-----
From: AWORKOFMARC <marcwhittemore@...>
To:
[email protected]
Sent: Tue, Apr 5, 2022 8:04 pm
Subject: Re: [WillysTech] Sealants
Ah thanks Roy
-------- Original message --------
From: Rod Frey <rodfrey@...>
Date: 4/5/22 7:52 PM (GMT-08:00)
Subject: Re: [WillysTech] Sealants
It was not an upgrade.? I rebuilt the box myself.
On 4/5/2022 5:22 PM, AWORKOFMARC wrote:
Can you please
direct me to where you got thid Ross Steering box upgrade?
For a Willys Wagon??
Thanks
-------- Original message --------
Date: 4/5/22 3:11 PM (GMT-08:00)
Subject: [WillysTech] Sealants
I'm ready to put my Ross steering box together after a rebuild.?
What advice can you offer about a sealant to use on the bolts and
a gasket sealant for the cover plate?
