开云体育

Hi Roger, Unfortunately I don’t own, or have played with a 9700. I can’t give any specific advices or info on how to set it up. The tricky thing on Dstar is the way you enter the callsigns. You

I am a D-Star newbie trying to access W6CX with Icom 9700 Can hear everything and have read adv manual , watched videos, and 2 9700 books.In Sebastopol. Anyone have some info/contacts on getting a

Oops, yes it’s C sorry for the typo. -fred-

Neil Yes RPT 1 should be set to W6CX ? C. SincerelyTrevor Hall WA6JAU

Thanks, Fred. I have read a bunch of stuff, and not all sources have said the same thing. By the way, though, shouldn't that be W6CX? ?C on 2 meters? Neil K6NCX

Hi Neil, To use W6CX for making calls to reflector W6CX is connected to, you need to have your radio configured as follow. Each big dots on the following lines represent a space. (Don’t put a

OK, In the past I've tried to paint a whole picture and I've gotten responses to one or two aspects, so I'll try asking tiny questions, one at a time. Making a local call via RF through W6CX on 2m, I

OK, In the past I've tried to paint a whole picture and I've gotten responses to one or two aspects, so I'll try asking tiny questions, one at a time. With these terminals defined: KF6AFY KF6AFY?A

OK, In the past I've tried to paint a whole picture and I've gotten responses to one or two aspects, so I'll try asking tiny questions, one at a time. I see that the registrationfor KF6AFY

Thanks. OK, KF6AFY now has terminals of A, C, and space, with no check for accesss point. To use one of these, what should the DVAP be named? Whay should MYCALL be on the ID-51? The same, or

Neil, Sorry for the late reply. Starting with callsign registration for KF6AFY, I see at https://regist.dstargateway.org/regcheck/index.php that the KF6AFY G terminal has the AccessPoint box

We have a DVAP dongle, an ID-51A handheld, and two IC-7100s. I’ll post later with my questions about using the ID-51 or IC-7100. Right now ID-51 to DVAP. And since I made the mistake of

Jim The first step to this project is?to create an estimate to present to the board. A design would also help which would also be used to present to the general membership. Trevor

Trevor, It is true that a change like this would require clear communication with users. The only trick is to remember to glance at the radio to see if the repeater is already transmitting. The

Michael Operating a multi mode digital voice repeater is very confusing to the users. Unless a DMR user notices that there is a carrier light on, they will not?know that there is a user on D-Star or

Hello Jim: Sounds like a solid platform.. Thanks, Tim K6BIV

Tim, I have already been looking into how to get usage data of our current DStar repeater. The current software captures callsigns and time of start of transmission, but I hope to find a way to get

Hello Mike: Neither NorCal DMR or BrandMeister has anything to do with the decision to move the W6CX D-Star repeater to a “full service” Digital repeater. The only issue is that it stays

Hi Jim, I have been using DMR from my base station for a little over 2 years. Originally via K6MDD and then switching to a Shark openSPOT which gives me more reliable DV coverage here in east county.

We are indeed fortunate to have a digital voice repeater up on the South Peak of Mt Diablo.? Our current repeater was set up in 2012 and consists of ICOM radios, an ICOM controller and an intel PC