Lawrence,
From looking at your diagram track 10 potentially
introduces a reverse loop.
The turntable does not need an auto-reverser.
Track 10 may need it. Gap both rails at the two
spots labelled 10, then power that thru the AR.
John
On 7/06/2023 7:24 am, Lawrence Varady
wrote:
toggle quoted message
Show quoted text
IMHO,I believe that it should have been stated, "IF ALL the spokes
are wired in the same + to - respectively, THEN the split ring
takes care of? NOT needing an AR".
If you look at the drawing I put in photos, you will see the
different polarities on my spokes.
They are also spread between A and B portions of the TT.
If you look at some documents out there, like the two cab wiring,
you will see how the polarities matter.
I would love to hear what Alan thinks.
