Re: AR1 turntable problems
|
Lawrence?
Step one is to exchange the AR1s. If the problem moves to the crossing, the AR1 is the problem. If it stays with the turntable? suspect the wiring.
Wouter
I am using a AR1 between my ATLAS TT rotating table rail and the spokes of which two are main line entry/exit points.
I'm having trouble when a Loco straddles the table and spoke. Locos can only move slowly from table to spoke and vica versa, so the loco straddles the gap for a long time.
It seems like the AR1 is oscillating back and forth. My Power Cab then switches and says Cab = 2 which is probably the PC short protection tripping.
The AR1 output is connected to the TT. The input is connected to its own power district/breaker.
I have another AR1 for a 30-degree cross in the center of the layout and no problem there.
Input is connected to the 4 isolated sections of the cross and the output is its own power district/breaker.
|
