开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: Body Damage

 

That's a decent sized trip if you have any structural damage, do you have an honest body shop or best rv place that can just look at it to see if it is still structurally okay, if so your son sounds like he could do a fine job, and the caulking idea might work fine.? Best of luck on your first adventure!


On Fri, Jul 12, 2024 at 5:14?PM Cheryl F via <misschero=[email protected]> wrote:
Greetings! I'm Cheryl, I just joined, thanks, it's good to be here. I finally got my 86' Toyota Dolphin on May 8th and I love it! This is my first post.?
I guess I backed into something and now a seam on the rear of my lil' Dolphin is damaged. Is this something I can fix myself or is it a job for a professional? My son is very good at fixing most everything. I have a short trip planned for this weekend, about an hour and a half away from home. I feel like driving the rig like this will make it worse. I really hope we can fix it before Friday. Fix it tips would be greatly appreciated!?
Thanks for looking, Cheryl


Re: Body Damage

 

Absolutely. Stainless steel or weatherproof screws are better to use in this situation.
------Andymon

On Fri, Jul 12, 2024 at 3:12?PM rz via <zaveson=[email protected]> wrote:
p.s. don't use the old holes. the screws have pulled out of the wood in those places. drill some new holes in the trim
--
rz


Re: Body Damage

 

p.s. don't use the old holes. the screws have pulled out of the wood in those places. drill some new holes in the trim
--
rz


Re: Body Damage

 

i agree except for the drywall screws. get some stainless steel screws. better in the long run
--
rz


Re: Body Damage

 

My take is that there is no significant structural damage here. I'd fill with cheap flexible colorless caulk to seal the area, clean the back and side, then use mad amounts of blue painters tape to pull the corner piece against the caulk until it cures. Maybe some drywall screws evenly spaced to hold the corner piece in place. If you want it to look pretty, thats someone else's domain.
------Andymon

On Fri, Jul 12, 2024 at 2:14?PM Cheryl F via <misschero=[email protected]> wrote:
Greetings! I'm Cheryl, I just joined, thanks, it's good to be here. I finally got my 86' Toyota Dolphin on May 8th and I love it! This is my first post.?
I guess I backed into something and now a seam on the rear of my lil' Dolphin is damaged. Is this something I can fix myself or is it a job for a professional? My son is very good at fixing most everything. I have a short trip planned for this weekend, about an hour and a half away from home. I feel like driving the rig like this will make it worse. I really hope we can fix it before Friday. Fix it tips would be greatly appreciated!?
Thanks for looking, Cheryl


Body Damage

 

Greetings! I'm Cheryl, I just joined, thanks, it's good to be here. I finally got my 86' Toyota Dolphin on May 8th and I love it! This is my first post.?
I guess I backed into something and now a seam on the rear of my lil' Dolphin is damaged. Is this something I can fix myself or is it a job for a professional? My son is very good at fixing most everything. I have a short trip planned for this weekend, about an hour and a half away from home. I feel like driving the rig like this will make it worse. I really hope we can fix it before Friday. Fix it tips would be greatly appreciated!?
Thanks for looking, Cheryl


'89 parts vehicle Dolphin

 

Not my ad



Looks like it's in Minnesota.


Re: 1991 Warrior - What is this thing in the taillight wiring?

 

Thanks, Doug.? It's definitely related to the tail lights.? The trailer lights tap in just aft of that connector (and I agree that it's almost certainly a connector) and they all work, as do the taillights, reverse light, brake lights, and turn signals.

I've pretty much ruled it out as a source of my clearance light problem unless they brought the wiring for the clearance lights all the way back to that connector which wouldn't make any sense at all.??

I'm quite certain that connector hasn't been unplugged in 34 years so I'm not touching it witihout some clear evidence that it's part of the problem.? I'm not that brave.? :-O

Rick in NH


Re: 1991 Warrior - What is this thing in the taillight wiring?

 

Its a connector, this would be a bad place for a fuse.? It is a toyota connector.? Probably a standard chassis component.? I'm guessing a tail light or signal fuse.? Only one way to know.? Turn all lights and the emergency signal on, disconnect the connector and look for failure. Or run both a?+ and - wire from a battery?(with a low amp inline fuse in the + wire), disconnect the connector and attach the leads to the aft end of the connector. Something should light up.


On Mon, Jul 1, 2024 at 11:37?AM Doug Hertzog via <itsuptoyoudad=[email protected]> wrote:
I vote for “a connector”, but it could be a fuse.? Either way you can most likely open it and look.?
You can also check continuity with a volt ohm meter it you think it might not be working.? ?




Re: 1991 Warrior - What is this thing in the taillight wiring?

 

I vote for “a connector”, but it could be a fuse. ?Either way you can most likely open it and look.?
You can also check continuity with a volt ohm meter it you think it might not be working.? ?




Re: 1991 Warrioir clearance lights

 

See attached. Hopefully it helps.?

Brandon


Re: 1991 Warrior - What is this thing in the taillight wiring?

 

Thanks, rz.? I'll do that.


Re: 1991 Warrior - What is this thing in the taillight wiring?

 

look under the hood. there are many connectors like it.? you have to push the tab on the side to disconnect it.??
? ?yes you have to remove the taillight to get to the clearance light wiring
--
rz


Re: 1991 Warrior - What is this thing in the taillight wiring?

 

Good afternoon, Jogues and Andymon.?

I'm thinking probably not a fuse.? I'm pretty sure that cable is strictly for lighting and there are fuses up front that protect that.

Andymon's suggestion that it is some kind of connector makes more sense for the reason he suggests.

I haven't tried opening or disconnecting that.? I'm too old, big, and arthritic to accomplish very much by crawling around under there without raising up the rear end somehow.? It sits too low to the ground for me to get around under there on a creeper.? Anyway I don't dare mess with it too much without some evidence that it's part of my clearance light problem... really hard to imagine they brought a separate wire all the way back to that connector (if that's what it is) for just the clearance lights.

Rick in NH


Re: 1991 Warrior - What is this thing in the taillight wiring?

 

Looks to me like a connector; the kind you would use to connect 2 wiring looms. Maybe the maker had several different sub-looms for different setups.


On Sat, Jun 29, 2024 at 12:34?PM Jogues via <jallairej=[email protected]> wrote:

Just a guess but I’d think ? fuse ?.? Did you try opening it?

On Saturday, June 29, 2024, fld via <fld=[email protected]> wrote:
Anybody have any idea what this thing is?



It's the thing marked "??" in about the center of the picture.? It's located on the house underside between the grey and black tanks, about 2 feet forward of the rear bumper.? Out one side is the taillight wiring and the other side goes forward (somewhere).

Still working on troubleshooting my clearance light problem... tail lights and front and rear marker lights all work as does the trailer light connector... I know this, because while metering the trailer light connector I shorted it out and blew the fuse (lucky I have plenty of spare fuses).

Rick in NH


Re: 1991 Warrior - What is this thing in the taillight wiring?

 


Just a guess but I’d think ? fuse ?.? Did you try opening it?


On Saturday, June 29, 2024, fld via <fld=[email protected]> wrote:
Anybody have any idea what this thing is?



It's the thing marked "??" in about the center of the picture.? It's located on the house underside between the grey and black tanks, about 2 feet forward of the rear bumper.? Out one side is the taillight wiring and the other side goes forward (somewhere).

Still working on troubleshooting my clearance light problem... tail lights and front and rear marker lights all work as does the trailer light connector... I know this, because while metering the trailer light connector I shorted it out and blew the fuse (lucky I have plenty of spare fuses).

Rick in NH


Re: 1991 Warrioir clearance lights

 

Thanks, rz.? What is the best way to get access to it?? Do I need to remove the left taillight assembly or is there another way?? I've been crawling around underneath there and don't see anything obvious.

Rick in NH (whose toyhouse won't pass state inspection until I can figure out a fix for this...)? :-(


1991 Warrior - What is this thing in the taillight wiring?

 

Anybody have any idea what this thing is?



It's the thing marked "??" in about the center of the picture.? It's located on the house underside between the grey and black tanks, about 2 feet forward of the rear bumper.? Out one side is the taillight wiring and the other side goes forward (somewhere).

Still working on troubleshooting my clearance light problem... tail lights and front and rear marker lights all work as does the trailer light connector... I know this, because while metering the trailer light connector I shorted it out and blew the fuse (lucky I have plenty of spare fuses).

Rick in NH


Re: 1991 Warrioir clearance lights

 

i would say they are all connected at the left tail light
--
rz


1991 Warrioir clearance lights

 

Anybody know how the clearance lights on a 1991 Winnebago Warrior are wired in?

All of the upper clearance lights, front and back, have quit working.? All the other lights (head, tail, stop, turn, etc.) all work including the bottom clearance lights left and right.

Fuses are all good.? I assume the clearance lights are controlled by the tail light fuse?

Rick in NH