Download Link ->?/g/tinysa/files/dfu-buddy-0.1.0-alpha3-x86_64.dmg
Source code link ->?
- Connect theTinySA device to be updated and power it up in DFU mode. Refer to the user manual of the device for specific instructions on how to enter this mode.
- Launch the application. Depending on the platform, there may be security warnings about being from an untrusted developer or source. You have to accept these warnings or??yourself. This is a common issue for open source applications because they are not signed by their developers at the OS manufacturers.
- Select the device from the?Device?dropdown menu. Please note that it may show a generic name like?STM32 Bootloader?instead of its usual brand name.
- Select the DFU file containing the firmware by either clicking the?Open...?button and choosing it via the file dialog or by dropping the file onto the application window.
- After having selected both device and file, some checks are performed to prove that they match. This is done to prevent accidentally flashing the device with a wrong firmware that is intended for some other unit.
- Check to?Confirm to proceed?checkbox in the lower left corner.
- Press the?Start update?button to initiate to update process.
- The update procedure will now start. 3 steps are executed: erasing the old firmware, writing the new one, verifying the written data. Each steps progress is shown by bar in the lower right corner.
- After all steps are finished, a result message is displayed.
- Close the application and restart the device in normal mode. The new firmware should now be running.
- The application window can be zoomed via key commands:
- macOS:?Cmd?+?+,?Cmd?+?-?and?Cmd?+?0.
?
?