Link to Windows 11 DFU Driver ->?/g/tinysa/files/TinySA_DFM_Driver.zip
?
1. Unzip TinySA_DFU_Driver ZIP file.
2. Plug the TinySA into the machine.
3. Open “Device Manager”
4. Make sure no other drivers for the TinysSA are installed. The Device Manager tree should look like this. Note the yellow triangle, STM32 Bootloader? and the TinySA is in the Other Devices category.
?
5. Unplug the TinySA from the machine.
6. Right click on “STtube.inf”??
7. Select “Install”
8. Click “Yes” if the User Access Control dialog pops up.
9. Once it is installed a dialog box will come up saying it was successful.
10. Plug the TinySA back into the machine.
11. The TinySA should now show up under “Universal Serial Bus Controllers” as “STM Device in DFU Mode”
?
?