开云体育

El 03/10/2020 a las 14:48, hwalker wrote:

Hi Erik Now it is perfect and audio sound very good in a radio. LOW OUTPUT 50MHz AM: 1000Hz=991HZ 5000HZ=4770Hz At 1000Hz modulation 32% and CCIT distortion 2.4% NFM: Audio tones spot on.

Hi Erik, I found one of this: when saving an image the file names are "tinysa_LOGMAG_S11_2020-10-03_13-27-58.png" and "tinysa_LINMAG_S11_2020-10-03_13-33-09.png" instead of "Log Power ..." and "Lin

Erik, I hope buyers of the tinySA realize the added value provided by your software, firmware and hardware support goes far beyond the purchase price of the tinySA.? I have equipment costing in

Erik, The code clean-up looks much, much better.? Confusing references to NanoVNA-App, other than appropriate credits to OneOfEleven (A.K.A Cathy), have been been pretty much eliminated. I have the

Many members of this group do have experience with spectrum analyzers before getting a tinySA, but for some the tinySA is their first spectrum analyzer. Especially for these users I made a paper

After some further cleaning (no new functionality yet) a new release of tinySA-App.exe instead of .s1p files the saving goes to .csv files. Let me know if I still missed (nano)VNA references The file

since everything (except the on/off switch) is under software control. Suggest a beginner mode, where the computer sets most values and limited menu options show. An advanced mode where it does its

Thank you thank you thank you. Going crazy, trying to do an update and getting the same error message. Downloaded the app mentioned and it worked on the first try. Name is Dave, from Marion, Iowa,

Thanks. Haven't received the unit yet. MIke N2MS

Charlie, You're right.? I got that backwards as far as making the sweep settings match.? As you said you have to set-up the range on the tinySA first and then make tinySA-App match it by selecting

Thanks for the info folks Dave

Herb: You said "I forgot to mention in my previous reply that if the user wants the tinySA display to match the start stop settings entered in tinySA-App, they can select the button with 4 right

Erik, I forgot to mention in my previous reply that if the user wants the tinySA display to match the start stop settings entered in tinySA-App, they can select the button with 4 right arrows before

Charlie, tinySA-App uses the very efficient 'scanraw' command for data transfers. This is a binary format that has the advantage of not being limited to the 290 point display limit of the tinySA. In

Correct The scanning mechanism used by TinySA-app is different from normal scanning so it can scan with many more points. If this is confusing I can consider to update the scan information on the

Herb, thanks for maintaining the todo list.

In the upper left corner of the display you can set Start, Stop frequencies.? Is the TinySA supposed to be set to these frequencies?? The app's display changes according to the settings. But, the

On Fri, Oct 2, 2020 at 09:59 AM, hwalker wrote: I downloaded v1.0.203 and had the following observations: 1.? Looks like you did manage to sneak a new icon in before release. 2.? The only

Another option for updating the firmware is to use the new tinySA-App software.? One-Of-Eleven incorporated that function in the original master software and it works very well.? I've found myself