开云体育

If Erik was to create a kickstarter or some such, for a TinySA with a larger screen and some of the other most requested features, I would immediately support it. I greatly appreciate the (thankless)

Can you connect to the tinySA serial over USB using a terminal emulator and issue the command leveloffset and post the generated output? -- For more info on the tinySA go to https://tinysa.org/wiki/

I repeated the test with both cables with the same result... Martin

Can you try calibration and self test with both cables? Seems the calibration level is wrong -- For more info on the tinySA go to https://tinysa.org/wiki/

I received two tiny SAs Both are failing the self-test. Attached are photos. Are they fixable? Thanks Martin -- Martin Grillo EMT-P,CIC, EMC COM T / RADO / AUXCOMM W1EMR / Amateur Extra PGGB063396 /

The modulation is 8 bit, the unit is NOT an 'NFM testing' device. How do you propose to control modulation and deviation ? Wrong tool for the job.

The missing "S" is already known (and fixed in the git repo): https://github.com/erikkaashoek/tinySA/issues/25 As for the original bug report in this thread, the one related to markers, I assume it is

Rudi, I can't find the missing 'S', please help me..... -- For more info on the tinySA go to https://tinysa.org/wiki/

See wiki entry,? last line:?https://tinysa.org/wiki/pmwiki.php?n=Main.SETTINGS3 -- For more info on the tinySA go to https://tinysa.org/wiki/

Frequency correction done: measured LO Output at 10MHz and it was found to be off by -27Hz, or 9.999.973MHz. And just to also have a reference at a higher? frequency, measured output at 150MHz, and

I would also like to suggest that you change the default audio modulation frequency at least for NFM mode from the present 5KHz to 1KHz. That would also save an extra generator setup step. Besides

BTW small correction to my initial opening post: I was testing the generator yesterday and it seems very promising to test radio receivers by using some external attenuation in the order of 50dB (NOT

If I had to choose only one output mode setting to be saved at the end of the session it would be the frequency. Ideally saving both frequency and level if possible would be nice. To compensate for

Hello Erik, In firmware tinySA_v1.3-347-g31eb02e.dfu in the menu: There is a letter *"S" missing* : DISPLAY->SWEEP ACCURACY->SPEEDUP 73, Rudi DL5FA

Marker 2, 3 or 4 in Delta mode, when they are exactly overlapping Marker 1, their indications are sometimes 4.29GHz instead of 0Hz. (next picture: when set Marker 4 to Tracking mode, it changes from

Hi Geoff, I've been doing that very same thing and find it helpful. I just don't want to keep taking out a 'Jump-Pack' to my car with a dead battery every time I want to take a trip to the store for

Mike, Thanks again.

Yes, one setting works in an identical way on both input and output. No, there is insufficient memory to store all settings but I may squeeze in some more. Please do specify your prioritized list of

Hello, I was testing the generator yesterday and it seems very promising to test radio receivers by using some external attenuation in the order of 30dB to bring the signal level down to a usable

Why don't you use a USB power bank, designed to re-charge mobile phones, if you want to extend the useage on battery. Simply plug into the USB socket on the tinySA. No need to open the unit or worry