Sorry for the late response.
I have an original product - bought nov. 2023 at ELESHOP, so counterfeit is not an issue.
Thus I got aware of being able to send it in for repair, but - today - after operating the "Fault Finder for the Tiny..." instructions, I'd order the parts as indicated, since the defects are probably due to own handling errors.
Rob
On Tue, 25 Feb 2025 00:00:32 +0100, Roger Need via groups.io <sailtamarack@...> wrote:
On Mon, Feb 24, 2025 at 10:08 AM, R. Maris wrote:
Through the dedicated tinySA support page I was forwarded to the tinySA groups.
I don't know what "support page" you were on before but this is the only place where the developer Erik supports the tinySA products.? Read this post about failing self-tests before asking more questions.
?
A couple of points:
- This group only supports genuine tinySA products.? Post a picture of the front and back of your device in order to determine if you have a counterfeit or genuine product.
- The selftest requires that one of the supplied cables be connected between the two ports.
- If you have a scope measure the output level of the 30 MHz. cal output with a 50 ohm load. ? It should be close to -26 dBm
Roger
--
Erstellt mit Operas E-Mail-Modul:
