Thank you for the link.
1. Memory Integrity for both machines are already set to OFF. So this isn't the issue, in my case anyway.
2. Comm Port Driver - I don't see any new comm port being added when I turn ON or OFF the tinySA Ultra. I have however successfully installed the tinySA-App prior to my attempts to update the FW.
3. Firmware Upgrade driver - On my desktop, the only thing I see being added to the Device Manager when my tinySA Ultra is in DFU Mode is the STM BOOTLOADER under Unirversal Serial Bus devices. And the FW Update worked perfectly fine. So I'm a bit hesitant to uninstall it as suggested. However, on my laptop, the STM BOOTLOADER doesn't ever show up, no Comm Ports either. But I get a strange message when I try to run the STM32CubeProg. Clicking Refresh Port under USB Configuration doesn't bring up anything. This item was done automatically on my desktop.
I've checked and tried all 3 but nothing worked on my laptop. So I feel that it could be a driver issue, unless I missed something else.
I have kept a screenshot of the topic discussed on the link given for reference. I'm might come in handy later.
Thanks again.
Horace F
Horace F
