|
I've posted a few updates to the SoftRock updates for PowerSDR. Nothing major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq mode
- Fixed a potential glitch/hang in level calibration with a SoftRock 40
- Fixed smooth panadapter scrolling when in fixed freq mode
To get the new code:
Regards,
Bill (kd5tfd)
|
Bill,
??? I downloaded the update and when I try to turn on the SDR
software, I get no response and it goes imediately back to STANDBY. I do not
have a SoftRock 40 hooked up yet. I don't think anything has changed on my
system, but I will reboot and check everything out if that doesn't fix it. Any
ideas? The previous versions worked fine.
?
Thanks,
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
toggle quoted message
Show quoted text
I've posted a few
updates to the SoftRock updates for PowerSDR.? Nothing
major, just
some bug fixes.? Specifically:
- Fixed problem using an SDR 1000
in fixed freq mode
- Fixed a potential glitch/hang in level calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in fixed freq
mode
To get the new code:
Regards,
Bill
(kd5tfd)?
|
toggle quoted message
Show quoted text
----- Original Message -----
From: "Stan Rife" <srife@...>
To: <softrock40@...>
Sent: Monday, September 19, 2005 4:52 PM
Subject: RE: [softrock40] Fresh Software - 20050917 level
Bill,
I downloaded the update and when I try to turn on the SDR software, I
get no response and it goes imediately back to STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think anything has changed on my system,
but I will reboot and check everything out if that doesn't fix it. Any
ideas? The previous versions worked fine.
I get a constant loud rough-sounding dit-dah-dit..., without anything connected. I still get it when playing one of the wav files.
Leon
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005
---
[This E-mail has been scanned for viruses but it is your responsibility to maintain up to date anti virus software on the device that you are
currently using to read this email. ]
|
Oh, good! It's not just me. Eric KE6US www.ke6us.com --- Stan Rife <srife@...> wrote: Bill,
I downloaded the update and when I try to turn
on the SDR software, I
get no response and it goes imediately back to
STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think anything
has changed on my system,
but I will reboot and check everything out if that
doesn't fix it. Any
ideas? The previous versions worked fine.
Thanks,
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@...
[mailto:softrock40@...] On
Behalf Of Bill Tracey
Sent: Monday, September 19, 2005 8:35 AM
To: softrock40@...
Subject: [softrock40] Fresh Software - 20050917
level
I've posted a few updates to the SoftRock updates
for PowerSDR. Nothing
major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq mode
- Fixed a potential glitch/hang in level calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in fixed
freq mode
To get the new code:
Regards,
Bill (kd5tfd)
SPONSORED LINKS
Shortwave
< ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w> receivers Ham
< +radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA> radio
_____
YAHOO! GROUPS LINKS
* Visit your group "softrock40
<> " on the
web.
* To unsubscribe from this group, send an email to:
softrock40-unsubscribe@...
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service
<> .
_____
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around
|
Eric, Leon & Stan I saw you were having trouble with Bill's latest software so I just now downloaded it and updated my system to check it out. It came up without any problem. I wonder if you have the latest PowerSDR 1.4.4 installed or if you are using a previous version? It seems to be working fine here without a receiver attached. Remember to select the "Hardware Oscillator" option under Setup, SoftRock. Cecil WA6RDY --- In softrock40@..., EricJ <eric_ke6us@y...> wrote: Oh, good! It's not just me.
Eric
KE6US
www.ke6us.com
--- Stan Rife <srife@s...> wrote:
Bill,
I downloaded the update and when I try to turn
on the SDR software, I
get no response and it goes imediately back to
STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think anything
has changed on my system,
but I will reboot and check everything out if that
doesn't fix it. Any
ideas? The previous versions worked fine.
Thanks,
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@...
[mailto:softrock40@...] On
Behalf Of Bill Tracey
Sent: Monday, September 19, 2005 8:35 AM
To: softrock40@...
Subject: [softrock40] Fresh Software - 20050917
level
I've posted a few updates to the SoftRock updates
for PowerSDR. Nothing
major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq mode
- Fixed a potential glitch/hang in level calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in fixed
freq mode
To get the new code:
Regards,
Bill (kd5tfd)
SPONSORED LINKS
Shortwave
< t=ms&k=Shortwave+receivers&w1=Shortwave+receiv ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
receivers Ham
< t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham +radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA> radio
_____
YAHOO! GROUPS LINKS
* Visit your group "softrock40
<> " on the
web.
* To unsubscribe from this group, send an email to:
softrock40-unsubscribe@...
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service
<> .
_____
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
|
toggle quoted message
Show quoted text
----- Original Message ----- From: "wa6rdy" <lindsey@...> To: <softrock40@...> Sent: Monday, September 19, 2005 7:41 PM Subject: [softrock40] Re: Fresh Software - 20050917 level Eric, Leon & Stan
I saw you were having trouble with Bill's latest software so I just
now downloaded it and updated my system to check it out. It came up
without any problem. I wonder if you have the latest PowerSDR 1.4.4
installed or if you are using a previous version? It seems to be
working fine here without a receiver attached. Remember to select
the "Hardware Oscillator" option under Setup, SoftRock. I'm using the latest 1.4.4 PowerSDR software, AFAIK. It was OK with the previous SoftRock40 files. Leon -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005 --- [This E-mail has been scanned for viruses but it is your responsibility to maintain up to date anti virus software on the device that you are currently using to read this email. ]
|
Yes, I was using 1.4.4. I uninstalled 1.4.4, overwrote again with the new SR40 software. Same problem. Then I overwrote with the previous SR40 and all is well again. Something that at least 3 computers doesn't like about the new version. I'm using XP with a Dell 2400/2.5g Pentium and the Creative SB Live card that came with it selected as Unsupported Card, MME on the Audio tab. Eric KE6US www.ke6us.com --- wa6rdy <lindsey@...> wrote: Eric, Leon & Stan
I saw you were having trouble with Bill's latest
software so I just
now downloaded it and updated my system to check it
out. It came up
without any problem. I wonder if you have the latest
PowerSDR 1.4.4
installed or if you are using a previous version? It
seems to be
working fine here without a receiver attached.
Remember to select
the "Hardware Oscillator" option under Setup,
SoftRock.
Cecil WA6RDY
--- In softrock40@..., EricJ
<eric_ke6us@y...> wrote:
Oh, good! It's not just me.
Eric
KE6US
www.ke6us.com
--- Stan Rife <srife@s...> wrote:
Bill,
I downloaded the update and when I try to turn
on the SDR software, I
get no response and it goes imediately back to
STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think
anything
has changed on my system,
but I will reboot and check everything out if
that
doesn't fix it. Any
ideas? The previous versions worked fine.
Thanks,
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@...
[mailto:softrock40@...] On
Behalf Of Bill Tracey
Sent: Monday, September 19, 2005 8:35 AM
To: softrock40@...
Subject: [softrock40] Fresh Software - 20050917
level
I've posted a few updates to the SoftRock
updates
for PowerSDR. Nothing
major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq
mode
- Fixed a potential glitch/hang in level
calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in
fixed
freq mode
To get the new code:
Regards,
Bill (kd5tfd)
SPONSORED LINKS
Shortwave
<
t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w> receivers Ham
<
t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
+radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
radio
_____
YAHOO! GROUPS LINKS
* Visit your group "softrock40
<> " on
the
web.
* To unsubscribe from this group, send an email
to:
softrock40-unsubscribe@...
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service
<> .
_____
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
------------------------ Yahoo! Groups Sponsor
--------------------~-->
Get fast access to your favorite Yahoo! Groups. Make
Yahoo! your home page
--------------------------------------------------------------------~->
Yahoo! Groups Links
softrock40-unsubscribe@...
__________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005
|
OK, it's working. I DID NOT have the "Fixed HW Osc" box checked with the new "overlay". I thought I had done that. Thanks, Eric KE6US www.ke6us.com --- wa6rdy <lindsey@...> wrote: Eric, Leon & Stan
I saw you were having trouble with Bill's latest
software so I just
now downloaded it and updated my system to check it
out. It came up
without any problem. I wonder if you have the latest
PowerSDR 1.4.4
installed or if you are using a previous version? It
seems to be
working fine here without a receiver attached.
Remember to select
the "Hardware Oscillator" option under Setup,
SoftRock.
Cecil WA6RDY
--- In softrock40@..., EricJ
<eric_ke6us@y...> wrote:
Oh, good! It's not just me.
Eric
KE6US
www.ke6us.com
--- Stan Rife <srife@s...> wrote:
Bill,
I downloaded the update and when I try to turn
on the SDR software, I
get no response and it goes imediately back to
STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think
anything
has changed on my system,
but I will reboot and check everything out if
that
doesn't fix it. Any
ideas? The previous versions worked fine.
Thanks,
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@...
[mailto:softrock40@...] On
Behalf Of Bill Tracey
Sent: Monday, September 19, 2005 8:35 AM
To: softrock40@...
Subject: [softrock40] Fresh Software - 20050917
level
I've posted a few updates to the SoftRock
updates
for PowerSDR. Nothing
major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq
mode
- Fixed a potential glitch/hang in level
calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in
fixed
freq mode
To get the new code:
Regards,
Bill (kd5tfd)
SPONSORED LINKS
Shortwave
<
t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w> receivers Ham
<
t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
+radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
radio
_____
YAHOO! GROUPS LINKS
* Visit your group "softrock40
<> " on
the
web.
* To unsubscribe from this group, send an email
to:
softrock40-unsubscribe@...
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service
<> .
_____
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
------------------------ Yahoo! Groups Sponsor
--------------------~-->
Get fast access to your favorite Yahoo! Groups. Make
Yahoo! your home page
--------------------------------------------------------------------~->
Yahoo! Groups Links
softrock40-unsubscribe@...
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around
|
Eric,
?
Hey, we will take a fix any where we find them!
Glad you are back in business.
?
Cecil - WA6RDY
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Monday, September 19, 2005 1:10
PM
Subject: Re: [softrock40] Re: Fresh
Software - 20050917 level
OK, it's working. I DID NOT have the "Fixed HW Osc"
box
checked with the new "overlay". I thought I had
done
that.
Thanks,
Eric
KE6US
--- wa6rdy <lindsey@...>
wrote:
> Eric, Leon & Stan
>
> I saw you were
having trouble with Bill's latest
> software so I just
> now
downloaded it and updated my system to check it
> out. It came up
> without any problem. I wonder if you have the latest
> PowerSDR
1.4.4
> installed or if you are using a previous version? It
>
seems to be
> working fine here without a receiver attached.
>
Remember to select
> the "Hardware Oscillator" option under
Setup,
> SoftRock.
>
> Cecil WA6RDY
>
>
>
> --- In softrock40@..., EricJ
>
wrote:
> > Oh, good! It's not just
me.
> >
> > Eric
> > KE6US
> >
www.ke6us.com
> >
> > --- Stan Rife
wrote:
> >
> > > Bill,
> >
>???? I downloaded the update and when I try to
>
turn
> > > on the SDR software, I
> > > get no
response and it goes imediately back to
> > > STANDBY. I do not
have a
> > > SoftRock 40 hooked up yet. I don't think
>
anything
> > > has changed on my system,
> > > but I
will reboot and check everything out if
> that
> > > doesn't
fix it. Any
> > > ideas? The previous versions worked
fine.
> > >?
> > > Thanks,
> >
>?
> > >
> > > Stan Rife
> > >
W5EWA
> > > Houston, TX
> > > K2 S/N 4216
> >
>??
> > >
> > > -----Original
Message-----
> > > From: softrock40@...
> >
> [mailto:softrock40@...] On
> > > Behalf Of Bill
Tracey
> > > Sent: Monday, September 19, 2005 8:35 AM
> >
> To: softrock40@...
> > > Subject: [softrock40]
Fresh Software - 20050917
> > > level
> > >
>
> >
> > > I've posted a few updates to the SoftRock
>
updates
> > > for PowerSDR.? Nothing
> > >
major, just some bug fixes.? Specifically:
> > >
>
> > - Fixed problem using an SDR 1000 in fixed freq
> mode
>
> > - Fixed a potential glitch/hang in level
> calibration
>
> > with a SoftRock 40
> > > - Fixed smooth panadapter
scrolling when in
> fixed
> > > freq mode
> > >
> > > To get the new code:
> > >
>
>
> >
> > > Regards,
> > >
> > >
Bill (kd5tfd)?
> > >
> > >
> > >
> > >
> > >
> > > SPONSORED LINKS
> > > Shortwave
> > >
> > <
>
t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
> >
>
>
>
>
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
>
> > receivers ????? Ham
> >
>
> > <
>
t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
> > >
+radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
> radio
?????
> > >
> >
>?? _____?
> > >
> > > YAHOO!
GROUPS LINKS
> > >
> > >
> > >
?????
> > >
*????? Visit your group "softrock40
> > >
<>
" on
> the
> > > web.
> > >??
>
> >
> > > *????? To unsubscribe
from this group, send an email
> to:
> > >?
softrock40-unsubscribe@...
> > >
>
>
>
>
> >
> > >??
> > >
> > >
*????? Your use of Yahoo! Groups is subject to
the
> > > Yahoo! Terms of Service
> > > <>
.
> > >
> > >
> > >??
_____?
> > >
> > >
> > >
>
>
> >
> >
__________________________________________________
> > Do You
Yahoo!?
> > Tired of spam?? Yahoo! Mail has the best
spam
> protection around
> >
>
>
>
>
> ------------------------ Yahoo! Groups
Sponsor
> --------------------~-->
> Get fast access to your
favorite Yahoo! Groups. Make
> Yahoo! your home page
>
>
--------------------------------------------------------------------~->
>
>
>?
> Yahoo! Groups Links
>
>
>????
softrock40-unsubscribe@...
>
>?
>
>
>
>
__________________________________________________
Do You
Yahoo!?
Tired of spam?? Yahoo! Mail has the best spam protection
around
|
Hi Leon,
I have been trying to duplicate some of the problems various people have with Bill's new binary. Here are a couple of things to try.
Be sure to have Disable PTT checked on the General Tab of Setup. On the Setup Audio Tab select Buffer Size as 2048.
His latest code is running well on my 2.2 GHz Dell 2400 machine.
73,
Tony KB9YIG
toggle quoted message
Show quoted text
----- Original Message ----- From: "Leon Heller" <leon.heller@...> To: <softrock40@...> Sent: Monday, September 19, 2005 12:37 PM Subject: Re: [softrock40] Fresh Software - 20050917 level ----- Original Message -----
From: "Stan Rife" <srife@...>
To: <softrock40@...>
Sent: Monday, September 19, 2005 4:52 PM
Subject: RE: [softrock40] Fresh Software - 20050917 level
Bill,
I downloaded the update and when I try to turn on the SDR software, I
get no response and it goes imediately back to STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think anything has changed on my system,
but I will reboot and check everything out if that doesn't fix it. Any
ideas? The previous versions worked fine.
I get a constant loud rough-sounding dit-dah-dit..., without anything
connected. I still get it when playing one of the wav files.
Leon
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005
---
[This E-mail has been scanned for viruses but it is your responsibility
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]
Yahoo! Groups Links
|
I checked that this morning and it would not work. I tried the following; 1. I checked the settings and everything looked fine, but it would not work with the 9/17 version 2. Reinstalled the 8/27 version and it would work fine with no changes in settings 3. Reinstalled the 9/17 and it would not work, I tried steps 2 and 3 several times and got the same result every time. 4. Deleted the database (PowerSDR.mdb), while 9/17 was installed, ran 9/17, it asked for the settings, I entered them, I when in and made some of the changes that installing doesn't set like the audio drivers settings and the SR-40 settings 5. 9/17 works fine now. There could be something in the database that is different between 8/27 and 9/17 At 03:17 PM 9/19/2005, Cecil Lindsey wrote: Eric,
Hey, we will take a fix any where we find them! Glad you are back in business.
Cecil - WA6RDY
----- Original Message -----
From: <mailto:eric_ke6us@...>EricJ
To: <mailto:softrock40@...>softrock40@...
Sent: Monday, September 19, 2005 1:10 PM
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
OK, it's working. I DID NOT have the "Fixed HW Osc"
box checked with the new "overlay". I thought I had
done that.
Thanks,
Eric
KE6US
<>www.ke6us.com
--- wa6rdy <<mailto:lindsey@...>lindsey@...> wrote:
Eric, Leon & Stan
I saw you were having trouble with Bill's latest
software so I just
now downloaded it and updated my system to check it
out. It came up
without any problem. I wonder if you have the latest
PowerSDR 1.4.4
installed or if you are using a previous version? It
seems to be
working fine here without a receiver attached.
Remember to select
the "Hardware Oscillator" option under Setup,
SoftRock.
Cecil WA6RDY
--- In softrock40@..., EricJ
<eric_ke6us@y...> wrote:
Oh, good! It's not just me.
Eric
KE6US
www.ke6us.com
--- Stan Rife <srife@s...> wrote:
Bill,
I downloaded the update and when I try to turn
on the SDR software, I
get no response and it goes imediately back to
STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think
anything
has changed on my system,
but I will reboot and check everything out if
that
doesn't fix it. Any
ideas? The previous versions worked fine.
Thanks,
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@...
[mailto:softrock40@...] On
Behalf Of Bill Tracey
Sent: Monday, September 19, 2005 8:35 AM
To: softrock40@...
Subject: [softrock40] Fresh Software - 20050917
level
I've posted a few updates to the SoftRock
updates
for PowerSDR. Nothing
major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq
mode
- Fixed a potential glitch/hang in level
calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in
fixed
freq mode
To get the new code:
<>
Regards,
Bill (kd5tfd)
SPONSORED LINKS
Shortwave
<<>
t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
receivers Ham
<<>
t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
+radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
radio
_____
YAHOO! GROUPS LINKS
* Visit your group "softrock40
<<>> " on
the
web.
* To unsubscribe from this group, send an email
to:
softrock40-unsubscribe@...
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service
<<>> .
_____
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
<>
------------------------ Yahoo! Groups Sponsor
Yahoo! Groups Links
softrock40-unsubscribe@...
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
<>
SPONSORED LINKS
<>Shortwave receivers <>Ham radio
----------
YAHOO! GROUPS LINKS
Visit your group "<>softrock40" on the web.
To unsubscribe from this group, send an email to:
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>softrock40-unsubscribe@...
Your use of Yahoo! Groups is subject to the <>Yahoo! Terms of Service.
---------- Cecil Bayona KD5NWA www.qrpradio.com 'Never argue with an idiot. They drag you down to their level then beat you with experience.'
|
I checked the new version this morning and it would not work. I tried the following; 1. I checked the settings and everything looked fine, but it would not work with the 9/17 version 2. I reinstalled the 8/27 version and it would work fine with no changes in settings 3. Reinstalled the 9/17 and it would not work, I tried steps 2 and 3 several times and got the same result every time. 4. Deleted the database (PowerSDR.mdb), while 9/17 was installed, ran 9/17, it asked for the settings, I entered them, I when in and made some of the changes that installing doesn't set like the audio drivers settings and the SR-40 settings 5. 9/17 works fine now. There could be something in the database that is different between 8/27 and 9/17
From: "Cecil Lindsey" <lindsey@...>
Date: 2005/09/19 Mon PM 04:17:00 EDT
To: <softrock40@...>
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
Eric,
Hey, we will take a fix any where we find them! Glad you are back in business.
Cecil - WA6RDY
----- Original Message -----
From: EricJ
To: softrock40@...
Sent: Monday, September 19, 2005 1:10 PM
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
OK, it's working. I DID NOT have the "Fixed HW Osc"
box checked with the new "overlay". I thought I had
done that.
Thanks,
Eric
KE6US
www.ke6us.com
--- wa6rdy <lindsey@...> wrote:
> Eric, Leon & Stan
>
> I saw you were having trouble with Bill's latest
> software so I just
> now downloaded it and updated my system to check it
> out. It came up
> without any problem. I wonder if you have the latest
> PowerSDR 1.4.4
> installed or if you are using a previous version? It
> seems to be
> working fine here without a receiver attached.
> Remember to select
> the "Hardware Oscillator" option under Setup,
> SoftRock.
>
> Cecil WA6RDY
>
>
>
> --- In softrock40@..., EricJ
> <eric_ke6us@y...> wrote:
> > Oh, good! It's not just me.
> >
> > Eric
> > KE6US
> > www.ke6us.com
> >
> > --- Stan Rife <srife@s...> wrote:
> >
> > > Bill,
> > > I downloaded the update and when I try to
> turn
> > > on the SDR software, I
> > > get no response and it goes imediately back to
> > > STANDBY. I do not have a
> > > SoftRock 40 hooked up yet. I don't think
> anything
> > > has changed on my system,
> > > but I will reboot and check everything out if
> that
> > > doesn't fix it. Any
> > > ideas? The previous versions worked fine.
> > >
> > > Thanks,
> > >
> > >
> > > Stan Rife
> > > W5EWA
> > > Houston, TX
> > > K2 S/N 4216
> > >
> > >
> > > -----Original Message-----
> > > From: softrock40@...
> > > [mailto:softrock40@...] On
> > > Behalf Of Bill Tracey
> > > Sent: Monday, September 19, 2005 8:35 AM
> > > To: softrock40@...
> > > Subject: [softrock40] Fresh Software - 20050917
> > > level
> > >
> > >
> > > I've posted a few updates to the SoftRock
> updates
> > > for PowerSDR. Nothing
> > > major, just some bug fixes. Specifically:
> > >
> > > - Fixed problem using an SDR 1000 in fixed freq
> mode
> > > - Fixed a potential glitch/hang in level
> calibration
> > > with a SoftRock 40
> > > - Fixed smooth panadapter scrolling when in
> fixed
> > > freq mode
> > >
> > > To get the new code:
> > >
>
> > >
> > > Regards,
> > >
> > > Bill (kd5tfd)
> > >
> > >
> > >
> > >
> > >
> > > SPONSORED LINKS
> > > Shortwave
> > >
> > <
> t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
> > >
> >
>
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
> > > receivers Ham
> > >
> > <
> t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
> > > +radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
> radio
> > >
> > > _____
> > >
> > > YAHOO! GROUPS LINKS
> > >
> > >
> > >
> > > * Visit your group "softrock40
> > > <> " on
> the
> > > web.
> > >
> > >
> > > * To unsubscribe from this group, send an email
> to:
> > > softrock40-unsubscribe@...
> > >
> >
>
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
> > >
> > >
> > >
> > > * Your use of Yahoo! Groups is subject to the
> > > Yahoo! Terms of Service
> > > <> .
> > >
> > >
> > > _____
> > >
> > >
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> >
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> Get fast access to your favorite Yahoo! Groups. Make
> Yahoo! your home page
>
>
--------------------------------------------------------------------~->
>
>
>
> Yahoo! Groups Links
>
>
> softrock40-unsubscribe@... >
>
>
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "softrock40" on the web.
b.. To unsubscribe from this group, send an email to:
softrock40-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
Cecil KD5NWA <www.qrpradio.com>
|
Sorry for doubling up, my client told me the email had not gone through. At 03:33 PM 9/19/2005, you wrote: I checked the new version this morning and it would not work. I tried the following;
1. I checked the settings and everything looked fine, but it would not work with the 9/17 version
2. I reinstalled the 8/27 version and it would work fine with no changes in settings
3. Reinstalled the 9/17 and it would not work, I tried steps 2 and 3 several times and got the same result every time.
4. Deleted the database (PowerSDR.mdb), while 9/17 was installed, ran 9/17, it asked for the settings, I entered them, I when in and made some of the changes that installing doesn't set like the audio drivers settings and the SR-40 settings
5. 9/17 works fine now.
There could be something in the database that is different between 8/27 and 9/17
From: "Cecil Lindsey" <lindsey@...>
Date: 2005/09/19 Mon PM 04:17:00 EDT
To: <softrock40@...>
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
Eric,
Hey, we will take a fix any where we find them! Glad you are back
in business.
Cecil - WA6RDY
----- Original Message -----
From: EricJ
To: softrock40@...
Sent: Monday, September 19, 2005 1:10 PM
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
OK, it's working. I DID NOT have the "Fixed HW Osc"
box checked with the new "overlay". I thought I had
done that.
Thanks,
Eric
KE6US
www.ke6us.com
--- wa6rdy <lindsey@...> wrote:
> Eric, Leon & Stan
>
> I saw you were having trouble with Bill's latest
> software so I just
> now downloaded it and updated my system to check it
> out. It came up
> without any problem. I wonder if you have the latest
> PowerSDR 1.4.4
> installed or if you are using a previous version? It
> seems to be
> working fine here without a receiver attached.
> Remember to select
> the "Hardware Oscillator" option under Setup,
> SoftRock.
>
> Cecil WA6RDY
>
>
>
> --- In softrock40@..., EricJ
> <eric_ke6us@y...> wrote:
> > Oh, good! It's not just me.
> >
> > Eric
> > KE6US
> > www.ke6us.com
> >
> > --- Stan Rife <srife@s...> wrote:
> >
> > > Bill,
> > > I downloaded the update and when I try to
> turn
> > > on the SDR software, I
> > > get no response and it goes imediately back to
> > > STANDBY. I do not have a
> > > SoftRock 40 hooked up yet. I don't think
> anything
> > > has changed on my system,
> > > but I will reboot and check everything out if
> that
> > > doesn't fix it. Any
> > > ideas? The previous versions worked fine.
> > >
> > > Thanks,
> > >
> > >
> > > Stan Rife
> > > W5EWA
> > > Houston, TX
> > > K2 S/N 4216
> > >
> > >
> > > -----Original Message-----
> > > From: softrock40@...
> > > [mailto:softrock40@...] On
> > > Behalf Of Bill Tracey
> > > Sent: Monday, September 19, 2005 8:35 AM
> > > To: softrock40@...
> > > Subject: [softrock40] Fresh Software - 20050917
> > > level
> > >
> > >
> > > I've posted a few updates to the SoftRock
> updates
> > > for PowerSDR. Nothing
> > > major, just some bug fixes. Specifically:
> > >
> > > - Fixed problem using an SDR 1000 in fixed freq
> mode
> > > - Fixed a potential glitch/hang in level
> calibration
> > > with a SoftRock 40
> > > - Fixed smooth panadapter scrolling when in
> fixed
> > > freq mode
> > >
> > > To get the new code:
> > >
>
> > >
> > > Regards,
> > >
> > > Bill (kd5tfd)
> > >
> > >
> > >
> > >
> > >
> > > SPONSORED LINKS
> > > Shortwave
> > >
> > <<>> > t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
> > >
> >
>
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
> > > receivers Ham
> > >
> > <<>> > t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
> > > +radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
> radio
> > >
> > > _____
> > >
> > > YAHOO! GROUPS LINKS
> > >
> > >
> > >
> > > * Visit your group "softrock40
> > > <> " on
> the
> > > web.
> > >
> > >
> > > * To unsubscribe from this group, send an email
> to:
> > > softrock40-unsubscribe@...
> > >
> >
>
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
> > >
> > >
> > >
> > > * Your use of Yahoo! Groups is subject to the
> > > Yahoo! Terms of Service
> > > <> .
> > >
> > >
> > > _____
> > >
> > >
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam
> protection around
> >
>
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
>
>
> Yahoo! Groups Links
>
>
> softrock40-unsubscribe@... >
>
>
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "softrock40" on the web.
b.. To unsubscribe from this group, send an email to:
softrock40-unsubscribe@...
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
Cecil
KD5NWA
<www.qrpradio.com>
Yahoo! Groups Links
Cecil Bayona KD5NWA www.qrpradio.com 'Never argue with an idiot. They drag you down to their level then beat you with experience.'
|
??? Bill had me delete my PowerSDR.mdb file and restart
Power SDR. This causes it to bring up the wizard again, and after you go through
that everything is ok. Give it a try.
?
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
toggle quoted message
Show quoted text
Yes, I was using 1.4.4.
I uninstalled 1.4.4, overwrote again with the new SR40
software.
Same problem.
Then I overwrote with the previous SR40 and all
is
well again.
Something that at least 3 computers doesn't like
about
the new version. I'm using XP with a Dell 2400/2.5g
Pentium and
the Creative SB Live card that came with
it selected as Unsupported Card,
MME on the Audio tab.
Eric
KE6US
www.ke6us.com
--- wa6rdy
wrote:
> Eric, Leon &
Stan
>
> I saw you were having trouble with Bill's latest
>
software so I just
> now downloaded it and updated my system to check
it
> out. It came up
> without any problem. I wonder if you have
the latest
> PowerSDR 1.4.4
> installed or if you are using a
previous version? It
> seems to be
> working fine here without a
receiver attached.
> Remember to select
> the "Hardware
Oscillator" option under Setup,
> SoftRock.
>
> Cecil
WA6RDY
>
>
>
> --- In softrock40@...,
EricJ
> wrote:
> > Oh, good! It's not
just me.
> >
> > Eric
> > KE6US
> >
www.ke6us.com
> >
> > --- Stan Rife > >
> > > Bill,
> >
>???? I downloaded the update and when I try to
>
turn
> > > on the SDR software, I
> > > get no
response and it goes imediately back to
> > > STANDBY. I do not
have a
> > > SoftRock 40 hooked up yet. I don't think
>
anything
> > > has changed on my system,
> > > but I
will reboot and check everything out if
> that
> > > doesn't
fix it. Any
> > > ideas? The previous versions worked
fine.
> > >?
> > > Thanks,
> >
>?
> > >
> > > Stan Rife
> > >
W5EWA
> > > Houston, TX
> > > K2 S/N 4216
> >
>??
> > >
> > > -----Original
Message-----
> > > From: softrock40@...
> >
> [mailto:softrock40@...] On
> > > Behalf Of Bill
Tracey
> > > Sent: Monday, September 19, 2005 8:35 AM
> >
> To: softrock40@...
> > > Subject: [softrock40]
Fresh Software - 20050917
> > > level
> > >
>
> >
> > > I've posted a few updates to the SoftRock
>
updates
> > > for PowerSDR.? Nothing
> > >
major, just some bug fixes.? Specifically:
> > >
>
> > - Fixed problem using an SDR 1000 in fixed freq
> mode
>
> > - Fixed a potential glitch/hang in level
> calibration
>
> > with a SoftRock 40
> > > - Fixed smooth panadapter
scrolling when in
> fixed
> > > freq mode
> > >
> > > To get the new code:
> > >
>
>
> >
> > > Regards,
> > >
> > >
Bill (kd5tfd)?
> > >
> > >
> > >
> > >
> > >
> > > SPONSORED LINKS
> > > Shortwave
> > >
> > <
>
t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
> >
>
>
>
>
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
>
> > receivers ????? Ham
> >
>
> > <
>
t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
> > >
+radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
> radio
?????
> > >
> >
>?? _____?
> > >
> > > YAHOO!
GROUPS LINKS
> > >
> > >
> > >
?????
> > >
*????? Visit your group "softrock40
> > >
<>
" on
> the
> > > web.
> > >??
>
> >
> > > *????? To unsubscribe
from this group, send an email
> to:
> > >?
softrock40-unsubscribe@...
> > >
>
>
>
>
> >
> > >??
> > >
> > >
*????? Your use of Yahoo! Groups is subject to
the
> > > Yahoo! Terms of Service
> > > <>
.
> > >
> > >
> > >??
_____?
> > >
> > >
> > >
>
>
> >
> >
__________________________________________________
> > Do You
Yahoo!?
> > Tired of spam?? Yahoo! Mail has the best
spam
> protection around
> >
>
>
>
>
> ------------------------ Yahoo! Groups
Sponsor
> --------------------~-->
> Get fast access to your
favorite Yahoo! Groups. Make
> Yahoo! your home page
>
>
--------------------------------------------------------------------~->
>
>
>?
> Yahoo! Groups Links
>
>
>????
softrock40-unsubscribe@...
>
>?
>
>
>
>
?????
?????
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
|
toggle quoted message
Show quoted text
----- Original Message ----- From: "EricJ" <eric_ke6us@...> To: <softrock40@...> Sent: Monday, September 19, 2005 9:10 PM Subject: Re: [softrock40] Re: Fresh Software - 20050917 level OK, it's working. I DID NOT have the "Fixed HW Osc"
box checked with the new "overlay". I thought I had
done that. I tried that and didn't get the constant dit-dah, but it won't go out of standby now! Leon -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005 --- [This E-mail has been scanned for viruses but it is your responsibility to maintain up to date anti virus software on the device that you are currently using to read this email. ]
|
toggle quoted message
Show quoted text
----- Original Message ----- From: "Stan Rife" <srife@...> To: <softrock40@...> Sent: Monday, September 19, 2005 9:46 PM Subject: RE: [softrock40] Re: Fresh Software - 20050917 level Bill had me delete my PowerSDR.mdb file and restart Power SDR. This
causes it to bring up the wizard again, and after you go through that
everything is ok. Give it a try. That seems to have been the cause of the problems. It's OK now. Leon -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005 --- [This E-mail has been scanned for viruses but it is your responsibility to maintain up to date anti virus software on the device that you are currently using to read this email. ]
|
Try deleting the database, you will have to re-configure it, but it worked for me this morning CST
toggle quoted message
Show quoted text
---- Original Message -----
From: "EricJ" <eric_ke6us@...>
To: <softrock40@...>
Sent: Monday, September 19, 2005 9:10 PM
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
OK, it's working. I DID NOT have the "Fixed HW Osc"
box checked with the new "overlay". I thought I had
done that. I tried that and didn't get the constant dit-dah, but it won't go out of
standby now!
Leon
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005
---
[This E-mail has been scanned for viruses but it is your responsibility
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]
Yahoo! Groups Links
-- Cecil KD5NWA <www.qrpradio.com> I fail to see why doing the same thing over and over and getting the same results every time is insanity: I've almost proved it isn't; only a few more tests now and I'm sure results will differ this time ...
|
At various times, various folks wrote: (summarized) Hey ... this new stuff does not work - can't get it to come out of standby Has deleting PowerSDR.mdb fixed this for everyone? Apparently I introduced something that makes the code confused when running against a prior PowerSDR.mdb file. One could probably work around the MDB incompatibility by renaming your existing PowerSDR.mdb and then starting up PowerSDR, and importing the renamed DB via the config wizard. Apologies for the glitch, and welcome to one of the joys of Software Defined Radio! Cheers, Bill (kd5tfd)
|
I was one with a "confused" computer. No big deal at all, Bill. All part of the learning experience, and I'm better for it. Eric KE6US www.ke6us.com --- Bill Tracey <kd5tfd@...> wrote: At various times, various folks wrote:
(summarized)
Hey ... this new stuff does not work - can't get it to come out of standby
Has deleting PowerSDR.mdb fixed this for everyone?
Apparently I introduced
something that makes the code confused when running
against a prior
PowerSDR.mdb file.
One could probably work around the MDB
incompatibility by renaming your
existing PowerSDR.mdb and then starting up PowerSDR,
and importing the
renamed DB via the config wizard.
Apologies for the glitch, and welcome to one of the
joys of Software
Defined Radio!
Cheers,
Bill (kd5tfd)
------------------------ Yahoo! Groups Sponsor
--------------------~-->
Get fast access to your favorite Yahoo! Groups. Make
Yahoo! your home page
--------------------------------------------------------------------~->
Yahoo! Groups Links
softrock40-unsubscribe@...
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around
|
