I checked that this morning and it would not work. I tried the following;
1. I checked the settings and everything looked fine, but it would not work with the 9/17 version
2. Reinstalled the 8/27 version and it would work fine with no changes in settings
3. Reinstalled the 9/17 and it would not work, I tried steps 2 and 3 several times and got the same result every time.
4. Deleted the database (PowerSDR.mdb), while 9/17 was installed, ran 9/17, it asked for the settings, I entered them, I when in and made some of the changes that installing doesn't set like the audio drivers settings and the SR-40 settings
5. 9/17 works fine now.
There could be something in the database that is different between 8/27 and 9/17
At 03:17 PM 9/19/2005, Cecil Lindsey wrote:
Eric,
Hey, we will take a fix any where we find them! Glad you are back in business.
Cecil - WA6RDY
----- Original Message -----
From: <mailto:eric_ke6us@...>EricJ
To: <mailto:softrock40@...>softrock40@...
Sent: Monday, September 19, 2005 1:10 PM
Subject: Re: [softrock40] Re: Fresh Software - 20050917 level
OK, it's working. I DID NOT have the "Fixed HW Osc"
box checked with the new "overlay". I thought I had
done that.
Thanks,
Eric
KE6US
<>www.ke6us.com
--- wa6rdy <<mailto:lindsey@...>lindsey@...> wrote:
Eric, Leon & Stan
I saw you were having trouble with Bill's latest
software so I just
now downloaded it and updated my system to check it
out. It came up
without any problem. I wonder if you have the latest
PowerSDR 1.4.4
installed or if you are using a previous version? It
seems to be
working fine here without a receiver attached.
Remember to select
the "Hardware Oscillator" option under Setup,
SoftRock.
Cecil WA6RDY
--- In softrock40@..., EricJ
<eric_ke6us@y...> wrote:
Oh, good! It's not just me.
Eric
KE6US
www.ke6us.com
--- Stan Rife <srife@s...> wrote:
Bill,
I downloaded the update and when I try to
turn
on the SDR software, I
get no response and it goes imediately back to
STANDBY. I do not have a
SoftRock 40 hooked up yet. I don't think
anything
has changed on my system,
but I will reboot and check everything out if
that
doesn't fix it. Any
ideas? The previous versions worked fine.
Thanks,
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@...
[mailto:softrock40@...] On
Behalf Of Bill Tracey
Sent: Monday, September 19, 2005 8:35 AM
To: softrock40@...
Subject: [softrock40] Fresh Software - 20050917
level
I've posted a few updates to the SoftRock
updates
for PowerSDR. Nothing
major, just some bug fixes. Specifically:
- Fixed problem using an SDR 1000 in fixed freq
mode
- Fixed a potential glitch/hang in level
calibration
with a SoftRock 40
- Fixed smooth panadapter scrolling when in
fixed
freq mode
To get the new code:
<>
Regards,
Bill (kd5tfd)
SPONSORED LINKS
Shortwave
<<>
t=ms&k=Shortwave+receivers&w1=Shortwave+receiv
ers&w2=Ham+radio&c=2&s=40&.sig=MB4yUGINw9tizVKS3Upr0w>
receivers Ham
<<>
t=ms&k=Ham+radio&w1=Shortwave+receivers&w2=Ham
+radio&c=2&s=40&.sig=XNtLoznpXE_hqNE4dvfaHA>
radio
_____
YAHOO! GROUPS LINKS
* Visit your group "softrock40
<<>> " on
the
web.
* To unsubscribe from this group, send an email
to:
softrock40-unsubscribe@...
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service
<<>> .
_____
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
<>
------------------------ Yahoo! Groups Sponsor
Yahoo! Groups Links
softrock40-unsubscribe@...
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
<>
SPONSORED LINKS
<>Shortwave receivers <>Ham radio
----------
YAHOO! GROUPS LINKS
Visit your group "<>softrock40" on the web.
To unsubscribe from this group, send an email to:
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>softrock40-unsubscribe@...
Your use of Yahoo! Groups is subject to the <>Yahoo! Terms of Service.
----------
Cecil Bayona
KD5NWA
www.qrpradio.com
'Never argue with an idiot. They drag you down to their level then beat you with experience.'
