开云体育

Many thanks for your replies and interest. Yes it configures correctly on windows, and I can not get any software to make it work properly. W 10 does not work at all, and windows 7 on laptop is the

Jon, Did you set the LF version with CFGSR? Setting the "Init" tab to LF https://sites.google.com/site/g4zfqradio/configuring-a-softrock-sdr/extio-or-cfgsr-some-notes should work. Ensure that this

I apologize to all. On a raspberry pi in a shell type "lsusb" and you should see this when the softrock is plugged in: "Van Ooijen Technische Informatica shared ID for use with libusb" This is what I

Thank, Roger.? Well, I did a lot of moving things around and unplugging items.? It is used with a desktop, so the only way of going off the grid is with the UPS I use for it when the power goes

Jon, Since it does not change when an antenna is removed that does suggest the noise is coming in over one of the connections. Can you run everything on battery and disconnected from the outside

Time for me to open my mouth and insert foot. Before tackling a raspberry pi, which should be simple, for me anyway, find out why it does not work on WIndoze.? I just plugged mine into win10 for the

I mentioned this in the video- does not go away.? Thanks.

What happens if you disconnect the antenna? Do you still see the noise?

Bob No but Which could well be due to ground loops, might be present on any platform. /g/softrock40/message/82427 Your YouTube QRM, no idea but I see similar and assume it is from

Try here. https://james.ahlstrom.name/quisk/docs.html#Installation I've been trying to? do? the same with a Pi and a? softrock 6.1. Not fully suceeded? yet as? I have a problem on

Has anyone managed to get the Softrock Ensemble II to work on a Raspberry Pi ? If so, please can you guide me to which software to use and how to set it up. Mine used to work on Windows 7, but I can

I made a short 3 min video describing and showing this interference: https://youtu.be/t-KQuJbB2wA Would really appreciate the group's help in solving it and thanks in advance. Jon

Announcing W6SFM's BUG ROUNDUP The Samuel F. Morse Amateur Radio Club, a Sacramento, California based CW enthusiast club wanted a special time to bring bug operators together on the air. In the same

Hello everybody, I noticed that the default value for FM modulation index in Quisk is set equal to 1.67. I use Quisk with a Softrock RXTX. Is it a correct value? I assume that 1.67 comes from 5/3,

Rubens Assembly instructions here http://www.wb5rvz.org/ 73 Alan G4ZFQ

"In a direct conversion system, the only intermod products are between the modulating audio and the carrier" This is only true if the system uses linear mixers and sine wave LO's. The massive

Jim: In a direct conversion system, the only intermod products are between the modulating audio and the carrier. Interstage transformers cannot filter that out. For a push pull output stage, the

Thanks for the reply. As their shipping estimator doesnt say anything about Europe I was unsure if the would ship to Europe. Regards OZ2PI

Hello colleague Niels, It was good for you to touch on this subject, I have two kits purchased from Tony Parks to assemble kit softrock ensemble, do you know anything about this equipment?

Niels, http://fivedash.com/ is the only supplier unless someone here has a used one for sale. 73 Alan G4ZFQ