I have used quisk on my linux boxes with NotSDR receivers and use just one side of the display.? Works great. I now have a stereo input (in addition to the regular stereo out) USB sound card. Those old receivers still don't have I-Q output for the sound card but the half that does work is still useful. When I build my softrock that stereo input will be twice as useful:)
73,
Bill KU8H
bark less - wag more
toggle quoted message
Show quoted text
On 1/27/22 2:28 PM, Alan G4ZFQ wrote:
If I put RX in USB mode on these signals above the center I can hear them . . . they are the same signals below the center that comes in LSB, like they should be.
The frequency readout above the spectrum display shows from about 7.235 - 7284, but I am not tuning up to 7.284,
Al,
You are feeding HDSDR with a mono signal.
Is the soundcard stereo?
Has the Ensemble an output on both channels? If so are they shorted together?
Is HDSDR set for IQ input?
73 Alan G4ZFQ
