开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: Need Help to setup SOftrock RXTX6.3 with MOBO 4.3 & PowerSDR2.4.4


 

Hello Ravi,

Yes, the basic configuration as used in the Softrock, ie NOT DDC/ DUC, will put the IC7300 in its place where it belongs.

For interest, I regularly get reports from Scottie Globemaster SDR owners telling me about their experience.

Here is one example:

*"I have compared the GM with my IC-7300 . ( SSB and CW )*
**
*It is very significant different : The IC-7300 is like an noise-generator ...*
**
*Stations which can copied on the GM absolutly clear .... they are on the IC-7300 much , much more*
**
*in noise and weak . Ofcourse : Using the same antenna for compare ."*

He then goes on to say after comparing many other receivers :
*"The worst receiver by far ... with the worst signal-to-noise ratio is the IC-7300 !!!! "*
*
*
Not my words !
**
*
*
*
*
So forget about all these fantastic digital radios with their limited dynamic range,
stick with the 24 bit analog radios with solid Bandpass Filtering if you are interested in performance.

BTW, It is so refreshing to see Yeasu using an analog front end in their very latest SDR radio.
THERE MUST BE A REASON WHY.
LOL , as if they did not know !

Don't be caught up in the digital hipe !

Regards
Ed GM3SBC???????



**

On 7/22/2021 5:52 PM, ravishankerp via groups.io wrote:
Thanks Alan...
My RXTX 6.3 with Mobo 4.3 is successfully sorting to action...
What is more surprising is that the Softrick + Mobo combination is preforming better over 7300 under low signal conditions probably due to the BPF acting as preselector in RX mode aiding the reception &? that its what is missing in 7300...
Thanks again Alan...
73'sde Ravi
On Mon, 19 Jul 2021 at 13:22, Ravi Shanker<ravishankerp@...> wrote: Thanks Alan, the link I shared was strangely not opening for me.
What you sent has opened up.
Let me try & use it & in case i need something else, I will get back on this post.
Thanks,Ravi
On Monday, July 19, 2021, 12:52:46 PM GMT+5:30, Alan G4ZFQ <alan4alan@...> wrote:

> Google search for this leads to the below link which is unavailable:?

? Ravi

That link is good, goes to
Do you see it? Is
something else missing?

73 Alan G4ZFQ









Join [email protected] to automatically receive all group messages.