Wow, wasn't aware of that.? Maybe that's why the receive was weaker than the other HF one I use now.? However, I'll put the SI570 under the magnifier and double check to be sure.? Thanks!
toggle quoted message
Show quoted text
On 6/16/21 2:26 PM, Tony Parks wrote:
Good Afternoon Jon,
Your reboot issue may have an RX II hardware problem cause. The HF RX II you recently sent to me for conversion to an LF RX II did not have the right and left end connections of the SI570 properly soldered to the appropriate circuit board pads, in fact one connection was not soldered at all. This could result in that connection to the Si570 being heat sensitive and sometime making enough contact to the circuit board to "work".
Regards,
Tony, kb9yig
On Jun 10, 2021, at 8:48 AM, JonI via groups.io <ji425bt@...> wrote:
I've had this issue off and on ever since setting up the Ensemble RX II a couple of months back. I can't trust that it will be running, so the first thing I do when in Win 7 is check CFGSR to see whether or not the unit is connected. About half of the time, it isn't and the only way to remedy is to reboot. After one reboot, most of the time it then shows connectivity but every so often it will take two reboots. A remedy for this would be welcome. I've tried different USB ports and in fact it is plugged into four plug hub right now. Thanks. Jon
