Re: Question on HardRock Driver asm/missing part
|
Go to this site...it's on the left side down the page.
This is the site where you should be for build instructions.
?
Lee
toggle quoted message
Show quoted text
-----Original Message-----
From: Chris Wilson
To: softrock40
Sent: Tue, Apr 8, 2014 9:10 am
Subject: Re[2]: [softrock40] Re: Question on HardRock Driver asm/missing part
?
Before you guys disappear could one of you post a full link to the
"Hardrock" forum please, I'd like to enrol. Thanks.
Best Regards,
Chris Wilson. 2E0ILY (UK)
> Hi Lee,
> In the process of moving the 3 pin Molex from the amp Board to the
> Driver. It got lost. Email me you address and I'lll send you one. (jcveatch1 at gmail dot com).
> As for the wiring, the pin out is the same on both ends. So P1 =>
> P1, P1 => P2 and P3 => P3. The connector should already be on the 3
> conductor cable and the diagram in Step 9 of the instruction shows
> where to solder each of the 3 conductors.
> We should consider moving this topic to the ARRLHBC group as it
> seems like a better forum for this discussion.
> 73's
> Jim WA2EUJ
|
