Looks good Chuck. I read about a 34dB difference between the two RF
input levels. This corresponds well to the voltage ratio of 50. Also
note the baseline noise is about 30dB below 1uV RMS. This corresponds
to a MDS of less than 0.05uV and has been reported by several who have
made the measurement.
73,
Tony KB9YIG
--- In softrock40@..., Chuck Carpenter <w5usj@9...> wrote:
Got an XG-1 signal gen kit from Elecraft yesterday. Built it this
morning
and had to try it out. Two pictures are posted showing the results.
The
signals are displayed with Rocky at a 6 zoom level.
The signal level accuracy is better than +/- 2dB according to
Elecraft specs.
Chuck Carpenter, W5USJ, Point, TX -|- Rains Co. -|- EM22cv -|- 72 es
73
50 years -|- 19 - K2OFN and 31 - W5USJ -|- Most fun = QRP since 1984.
www.w5usj.com hosted by Hamnutz.com -|- NeTxQRP www.netxqrp.com
