Rocky also won't start the Audigy 2 NX external USB card here
either. Won't work with 48 or 96 Khz sampling, or if you set a
second card as output. I get the same error message as Joseph. But
looks great, I'll have to boot my wife off the tower system to try
it with the internal card there.
73,
Bruce N1RX
--- In softrock40@..., "josephlevy" <josephlevy@y...>
wrote:
Tried the new Rocky by Alex VE3NEA and regrettably it does not
work
with my Audigy (gives a 'unable to start input from SoundBlaster
Audigy
2 NX) so cannot test operation at 96 khz. Well I'll wait and see
if
more people have the same problem...
Will try to operate on external supply and see if the noise at the
LO
is power supplied by the USB or a ground loop (or both).
Hav'nt seen the I/Q automatic balancing work yet but in the other
SW
packs it is really something to be addressed because the image
once
nulled on a certain frequency is definitly growing and changing on
other freq. So a mapping (table and interpolation) or the
automatic
way shoult be implemented IMHO.
Have a nice (Rocky??) weekend de Joe
