Cecil,
The crystal that is 17 kHz low would work well if you are meaning the crystal is 68 kHz low at its fundamental frequency. Seventeen kHz low even at its fundamental frequency would still probably be ok.
toggle quoted message
Show quoted text
----- Original Message -----
From: "KD5NWA" <KD5NWA@...>
To: <k4oah@...>
Cc: <softrock40@...>
Sent: Wednesday, September 28, 2005 1:51 PM
Subject: [softrock40] Re: [QRP-L] (no subject)
We are in the process of backing up and punting instead. I've been
advised to move the crystal frequency of SR-40 by 12KHz on the low or
on the high side, to get away from some of the noise in the center of
the receivers band.
Not an easy job due to lack of crystals at those high frequencies, I
found one 17 KHz low, too low for my taste. I'll be checking for
something closer later when I get a break.
Any guesses as to how low could I pull a 35.328 MHz crystal? 48KHz lower?
I kept the names of the interested parties, and will keep you posted.
At 01:03 PM 9/28/2005, Garey Barrell wrote:
Cecil -
Please put me down for one of the 8.830 MHz units.
PayPal?
Thanks for doing this for us!
73, Garey - K4OAH
Atlanta
Drake C-Line Service Manual
<>
Cecil Bayona wrote:
If one or two guys/gals are interested in getting a OSC module for
8.830MHz the Kenwood panoramic output on the back of the radio, let
me know before tomorrow night and I'll include an extra module for
you for cost + shipping. I'll send a last call before sending out
the purchase order.
Cecil Bayona
KD5NWA
www.qrpradio.com
'Never argue with an idiot. They drag you down to their level then
beat you with experience.'
Yahoo! Groups Links
