开云体育

Hello Riley, A couple of things would be helpful to know. Exactly which pins from the 16 pin connector do you have going where??? What voltages do you have, with and without signal? For this kind of

There was..... one chip that was made by, a name I cannot remember off the top of my head but I bought several, was originally designed to do telephone SF at 2600 Hertz. That used a 3.58 MHz Crystal.

I see multiple ways of doing it. First thing to ask is what will be controlling the second radio? one thing I see is if you use a network controlled power bar connected to the same network as the

Having some issues with my CM300 I bought a RB RIM Maxtrax USB and I've tried everything. The RB RIM shows up on the USB for the raspberry pi with allstarlink 3 but I can't get the raspberry pi to

Actually, it does, though my recollection was nylon-white in color. Want to sell one..?

I am looking to network a UHF repeater into a local Allstar network using a Dell thin client. Whilst I understand that remote shut down of the repeater can be achieved within the software, I also need

Hi to All, I am replacing a Failling MSR2000 VHF 100 Watts by a Tait T800 series 2 VHF 100 Watts. The receiver of the MSR is driving a Sectra-Tac board in a voting system. The new Tait Repeater as a

Please text me at 608-575-7991, or email to WI9 hf@... for the repeater sale. Thanks. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.

?I have an extra Kenwood NXR 1800 UHF repeater that never really gets used for sale like new condition come with repeater, box, all mounting hardware, and power cords. This has very few hours on it

This brought back memories…. I still have a Maya44 pci card I used with MCRS many years ago. Matt AL0R Sent: Saturday, May 3, 2025 11:49 To: Repeater-Builder <[email protected]> Subject:

I second what John, NI0K, said. I am running MCRS on two computers with AudioBox 1818 8-channel sound cards. Works well and has for several years. Tim Berry WB4GBI WB4GBI repeater systems

Indeed, the Micor and MSR2000 station card puller. Likely one was shipped with every station. It was a *LOT* easier to pull cards with this tool. Perfect candidate for 3D printing!

Just to back up your statement about the ballast resistors, Jeff, the first Henry amp I worked on I bought used, originally on 47 MHz, and someone had used it on 6M before I got it. All the ballast

https://www.abyssmedia.com/mcrs/ is what I use. The VOX operation is good and there are enough options for all kinds of recording scenarios. OTOH, there is free software available for all sorts of

Hello everyone, I'm using the bi7jta card for GM340 repeaters. It works well on FM. I have two problems: I get echo when users speak, as if they're using an echo microphone. The second problem is

That looks like the MSR-2000 card puller, may work in Micor stations as well. [email protected]> wrote:

Bob, I found a couple of these while packing up for the Dayton Hamvention. Is this the tool you're seeking? If not, do you know what model this is for? Lousy picture, sorry. Text reads "Motorola Base

I have a TE Systems 0552G 6m "brick" amp (not a repeater amp). It never made the rated 375 watts. On a good day with the wind at its back and a stiff 14 volts on the collectors it will do about 325

If you want to actually record just active audio (aka VOX) go to EDIT-->PREFERENCES-->RECORDING Enable Sound Activated Recording Set the slider to an appropriate spot to trigger on active audio 73,

You might get a quote above $2500 now Military has bought quite a few of them