开云体育

Your Welcome Rick. HAHA Thanks again Sir.. Kory Links: ------ [1] /g/repeater-builder/message/215281 [2] /mt/113134021/6175112 [3]

A good alternative for those with AllStar on their repeaters is to get an Asterisk phone number and configure your AllStar node to handle the phone patches. Works well for those who are already IP

Hello RB members, I have a potential project that I thought I would list for those of you who like things like this. I have the bottom half of a Decibel DB-420 16-bay antenna array here that is cut

All have SOLD in less than 24 hours. A big THANKS to all who had interest or got one! If I get any more, I will be sure to post up about it! Rick w6re

Many thanks to all for the overwhelming requests for these antennas. They have all SOLD but I want to thank each and every one who had interest or got one for your outreach! SOLD SOLD SOLD They are

I had similar issues down here just south of you in my soil. We have "hills" all around us and can't dig 2ft down with out hitting something big solid. When I did my tower grounds, i drove the first

It has been several years ago, but at that time electrical code required the house ground to be embedded in the concrete of the house foundation. Keeping that in mind, you probably already have a

Soldering them together is fruitless. Always use Caldwell

I've seen electricans put ground rods in using hammer drills. might be worth a try ? Mike KA2NDW

I had a similar issue here in northern Colorado. The soil is clay with bedrock at 4 feet. I ended up driving each rod with a big hammer drill until bedrock, then cut it off and drove the remainder

I started out with using water. With it 6ft down now there's no pulling it up. I have still been soaking the hole for hours today. It's just sitting there with water in it. That clay doesn't let much

Pour water down the side of the rod and let it set a while. Repeat process several times. They try again and if it doesn’t go down see if you can pull it up and pour water directly down the hole

Been trying all day to get a 8ft grounding rod all the way down. I have 6ft in the ground. It doesn't seem to want to go deeper. I feel I've hit rock. The ground here is very rocky & mixed with red

I've sucessfully repaired MTR2000 with bad PA transistors. Might be cheaper than buying a new PA. Got the devices from Chiner for (about 3 years ago) $16/ea. GeorgeC W2DB

Then it seems like there is a demand for them. Mick - W7CAT

why would any one want to buy "popped Transistors" Skull hat on LOL

popped transistors? GeorgeC W2DB

Thanks for that. Yes I just missed the boat on them. They sold I believe within two hours.

I think Ken from Arcom was just announcing on his RC210 groups.io that he was selling the last two they had in stock. Joe

I am looking for an Arcom AP1 Intelligent Autopatch if anyone has one for sale. The part has been discontinued so the only option is to see if I can pick up one secondhand. Much appreciated and?73,