开云体育

LDF5 was replaced with AVA5P and as noted, the older connectors are not compatible. The center remains hollow however. Matt AL0R Sent: Saturday, May 10, 2025 11:25 To: [email protected]

The computer I usually use doesn't have a serial port and I can't find my usb to serial adapter, so fired up my old xp machine with a for real serial port. Thanks all for your help. Good to know about

See Chris's comments about the fuse. BTW, the only reason to use the mic jack is if you're updating the firmware (or don't want to otherwise with the rear panel DB25). Good to hear you're good to go

I tried it on serial port on the back and it works, for some reason, not on the mike connector on the front which is what I use on my other repeaters. Thanks. Butch Bussen wa0vjr wa0vjr@... irlp

If the RJ mic jack has been shorted there is a 0ohm resistor that acts as a fuse...if it's blown, the program cable won't work..you can always use the DB25 Chris WB5ITT [email protected]> wrote:

I will weigh in with my resolution, I've always used a 25 pin serial cable the back of the repeater on the 25 pin accessory port and that's always worked fine. Chad Nelson WI9HF/WRPL979 Janesville

Do you already have an existing file loaded when you download?

If you post your codeplug, I’m sure several of the geniuses on here will gladly look at it for you. Will

that is what I thought, then why do I get that error? Butch Bussen wa0vjr wa0vjr@... irlp 7135 allstar 56023 echolink 790800 new home phone 785 852-1102

KPG-91D will work Ken ------------------------------------------------------------------------------ President and CTO - Arcom Controllers Makers of repeater controllers and accessories Phone: (503)

I thought my software for my 850 would work, but it says check radio model, retry. Does it take a different program? Thanks. Butch Bussen wa0vjr wa0vjr@... irlp 7135 allstar 56023 echolink

Andrew did discontinue making the LDF-5-50 They (Commscope for a time) replaced it with AVA-5 cable which is not compatible with the older connectors. despite any announcements of the Andrew company

anyone have for sale the xg100m lowband amp? ?looking fr one at a reasonable price (not the one thsts on ebay now lol thanks Jeff N2IA

At the top of the rf configuration psge(if I’m remembering correctly) you can choose “base” or “repeater”. Is repeater selected? georgec w2db

I have a quantar VHF version and I am looking a working codeplug or settings as the one I have does not go into tx when the Rx receives a signal Any help to get this working will be greatly

You can try replacing Q1 first but I think it might be a U1 problem in which case it may be cheaper to try another card from eBay or someone on the list. [email protected]> wrote:

Also.? If I place a clip lead on the cathode of the LED and ground the lead, the symptoms are the same as previously mentioned.? It transmits for a bit then drops.

So +10V is pretty steady at 10.7V TX OSC +10V reads ~0.2V with no RX (i.e. TX not expected).? When I expect transmit, this reads ~12V then drops to 10.7V when the output power drops.

<https://investors.amphenol.com/news-and-events/news-details/2025/Amphenol-Corporation-Completes-Acquisition-of-OWN-and-DAS-Businesses-From-CommScope/default.aspx>

Might be interested in the call box …. Do you have the programming cable and software? We’re gonna be at spot numbers 7773, 7772, 7872 Martin Martin L. Grillo EMT-P, CIC, EMC COM L Inst. / ITSL(t)