开云体育

I'm more confused after reading your second post. The link you provide below is to modify a Micor PL encoder so that it doesn't send reverse burst. It doesn't cover what is required to install a PL

Okay... Please answer the other questions. Additionally - does the transmitter key properly with the encode board installed? Kevin

Kevin, Sorry for the confusion. This is referring to the encoding of pl. nothing to do with decode. The decode portion of the radio works great...sorry for the confusion. Here is the

Tyler, You seem to be saying that you installed a decode board, but it doesn't encode.? You do realize that decode and encode on a MICOR mobile requires two vastly different boards?? If you

I have a low uhf micor mobile (old board) according to the manual. it did not have a decode board in it when I got it. i put one in it and did the mod to the board to bot key the exciter at all times.

Greetings, I'm looking for a copy of the NU-140 power supply. This is the 110 AC supply used on the P series 5 Watt high band (10 Watt low band) P33 Handie Talkie. I have the schematic of the later

Look into Victron Energy Smart Battery Protect 12/24v. They have models rated at 60 to 200+ amps and are bluetooth app. programmable. A 100A cutout costs roughly $75 usd. They make diode isolators,

Use an external "smart" battery charger compatible with your chosen battery capacity and chemistry, a diode block (aka battery isolator), and a low-voltage disconnect. I would not suggest spending

Would like to add the battery backup option to an existing Astron RM-50M. Interested in suggestions on the best way to accomplish this. 73 Martin W2RWJ

OK, the phone number at the bottom of this email is the best number to reach me. I work until 430 central time so anytime after that is good. Chad Nelson WI9HF/WRPL979 Janesville

Carl, si jai a disposer d un Zetron 48 MAX ca peut tu vs servir?? gervais ve2ckn ________________________________ De : [email protected] <[email protected]> de la part de Carl

I’ll call you tomorrow John N. Hudson III, Regional Emergency Communications Coordinator (Retired) California, Governor’s Office of Emergency Services Public Safety Communications Tactical

And Allstar runs on a RPi vice a windows box. That way you do not have to have an unattended windows box (scary) and support the M$ vampire. Allstar integrates with Asterisk pbx networks (AREDN in

Hi John, sounds good. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.

I’m interested Chad, John N. Hudson III, Regional Emergency Communications Coordinator (Retired) California, Governor’s Office of Emergency Services Public Safety Communications Tactical

Thank you Greg! I have downloaded it and looking at it, I now suspect U2 for my RX Audio problem. To be confirm. Best 73 Carl VA2CMB ________________________________ De : [email protected]

I run VMBOX on Win10...load XP SP3 32BIT on the VM box..it can run anything you need Chris WB5ITT [email protected]> wrote:

Get the stripper tool. Use a drill and you're done in 30 secs Chris WB5ITT [email protected]> wrote:

The manual with schematics is on the Repeater Builder site now.

I use an IBM thinkpad model X20. it’s a P3 with a real serial port. ?I don’t use moslo or anything for maxtrac or gm300. These machines run XP and 2000 with no problems. ?I use separate