开云体育

Just more info than I can handle at the moment. Please unscribe me for now. Will rejoin later. Thanks, Bruce, N9TTN

FROM ray@... I have a Motorola amp I need some help to identify just what it is . I haven't been able to find a reference to the amp on the Motorola web sight. Its a TLE2511A. I was told that

There is software called Repeater Blaster, I have looked at the demo version.. I would like to have a win9X based program will all the functions as a RC-85 type of controller. Of course, links and

Ed: I'm interested too. There was a web site for this, but when I rechecked the link, it was gone. Used a PC, DOS program and a small PC board. Looked good. Have you tried a web search?? John NI0K

I have seen a lot of people using different single board repeater controllers, but does anybody use a PC running special software as a repeater controller? Ed N3SDO Ed Bathgate RMA Dept (724) 772-8785

I'm looking for 'user xtals' for some 13-509's .. I would also to have TX xtals for a repeater : 224.06 224.24 224.28 224.42 224.48 and I could use others.. Please email me directly: w4yyz@...

In a message dated 5/18/99 1:12:47 AM !!!First Boot!!!, drreality@... writes: << From: Terry Brown <drreality@...> Hi Guys: Well here is a problem for someone to besides me to try to

Terry the configuration that Link has on cables for the Vertex is all wrong I just put another VX5000 on the air the other day & had gotten a FAX from Link on the cable it did exactly what yours did,

Hi Guys: Well here is a problem for someone to besides me to try to figure out. I recently bought a new Yaesu VXR-5000 UHF repeater and a Link RLC1-Plus controller. Ordered the controller direct from

never believe any salesman. sounds like they will fix it so i sugest you send it back to them. make sure they will do it at no charge. hopefully your messing with it hasnt voided the warranty. 73 good

"CHRISTOPHER W. (Chris) BOONE" wrote: Chris, Sorry I missed you at Dayton, had a great time also. Fred Vobbe and I talked at length about you not being there at the booth. Well maybe next year or

Just a comment... this is where OneList shines. I know people with old mail programs hate it, but if you're willing to accept that not everything can be expressed in words, this message is a perfect

There was a article in the old ACC notes that ACC used to send out I don't have mine handy right now and I don't have a scanner right now either maybe someone else can help? tom n8ies Miles Gillie

Test only....... Please disregard Kevin

Henry Clark wrote: Here is a permanent url. http://www.kuggie.com/rbtip/pix/mastr2smeter.jpg Kuggie

Henry Clark wrote: Here you go..... kuggie

I recently read a post concerning hooking up an s-meter from a MASTR II to an ACC controller. This may be redundant, but.....Is there anywhere I can get a copy of the ACC notes showing a diagram of

Hi All, Thanks for the information, I had a look at some of the old motherboards and found the 8251A Uart chip. Regards Kevin, ZL1UDD. PS Hope all those that went to Dayton had a great time.!!!

Well I am back home and time to recover from the trip. It was nice seeing all of you there. I missed many of you (Chris WB5ITT) and guess you were recovering from the many events. Hung around the Link