I changed frequency to 442.100. But not sure about the crackle. I tried it here and didn't notice any noise on RX.
Give me a call later on tomorrow, since leaving soon.
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Butch-tiny puppy via groups.io
Sent: Saturday, May 10, 2025 2:21 PM
To:
[email protected]Subject: Re: [repeater-builder] trying to read data on a kenwood 851 repeater
The repeater has a noise on receive like bacon frying. Not sure what is causing that. I can give you a call if you want to listen to it. kind of a crackling noise. I haven't tried adjusting anything yet, but sensativity is poor even on the
151.1875 frequency.
Butch Bussen
wa0vjr
wa0vjr@...
irlp 7135
allstar 56023
echolink 790800
new home phone 785 852-1102
----- Original Message -----
From: "Chad Nelson via groups.io"
<chad.nelson71@...>
To: <
[email protected]>
Sent: Saturday, May 10, 2025 12:16 PM
Subject: Re: [repeater-builder] trying to read data on a kenwood
851 repeater
That's good to know thanks. Hopefully my little laptop comes by Wednesday because tentatively planning on going back to the site in portage on Thursday to visit the lady Buggs, well OK not really, but putting up the Lincoln tenor for the repeaters and figuring out what is going on with my DNC. I turned it on and it gives me a little Gibberish character, but then I turn it off and back on again and then it works. Might have to just flush the whole TNC and start over. Would like it just to power up and work because if there's a power failure and that TNC comes back on then it won't power up correctly and I'm 70+ miles away from the site with no transportation.
Chad Nelson WI9HF/WRPL979
Janesville Wisconsin
608-754-8671
Send from my spectrum iPhone 16.
On May 10, 2025, at 12:58?PM, Butch-tiny puppy via groups.io
<wa0vjr@...> wrote:
?yes, works fine. nvda is the best, although works with window-eyes
as well.
Butch Bussen
wa0vjr
wa0vjr@...
irlp 7135
allstar 56023
echolink 790800
new home phone 785 852-1102
----- Original Message -----
From: "Chad Nelson via groups.io"
<chad.nelson71@...>
To: <[email protected]>
Sent: Saturday, May 10, 2025 11:44 AM
Subject: Re: [repeater-builder] trying to read data on a kenwood
851 repeater
That was one of my questions I actually had and you might have just
answered it for me, but, does your Windows XP box work with the KPG
91D software?
Chad Nelson WI9HF/WRPL979
Janesville Wisconsin
608-754-8671
Send from my spectrum iPhone 16.
On May 10, 2025, at 12:32?PM, Butch-tiny puppy via groups.io
<wa0vjr@...> wrote:
?The computer I usually use doesn't have a serial port and I can't
find my usb to serial adapter, so fired up my old xp machine with a
for real serial port.
Thanks all for your help. Good to know about the fuse.
Butch Bussen
wa0vjr
wa0vjr@...
irlp 7135
allstar 56023
echolink 790800
new home phone 785 852-1102
----- Original Message -----
From: "Ken Arck AH6LE via groups.io"
<ken@...>
To: <[email protected]>
Sent: Saturday, May 10, 2025 11:21 AM
Subject: Re: [repeater-builder] trying to read data on a kenwood
851 repeater
See Chris's comments about the fuse.
BTW, the only reason to use the mic jack is if you're updating
the
firmware (or don't want to otherwise with the rear panel
DB25).
Good to hear you're good to go
Ken
At 10:13 AM 5/10/2025, you wrote:
I tried it on serial port on the back and it works, for some
reason, not on the mike connector on the front which is what
I
use on my other repeaters. Thanks.
Butch Bussen
wa0vjr
wa0vjr@...
irlp 7135
allstar 56023
echolink 790800
new home phone 785 852-1102
----- Original Message -----
From: "Butch-tiny puppy via groups.io"
<wa0vjr@...>
To: <[email protected]>
Sent: Saturday, May 10, 2025 10:43 AM
Subject: Re: [repeater-builder] trying to read data on a
kenwood
851 repeater
that is what I thought, then why do I get that error?
Butch Bussen
wa0vjr
wa0vjr@...
irlp 7135
allstar 56023
echolink 790800
new home phone 785 852-1102
----- Original Message -----
From: "Ken Arck AH6LE via groups.io"
<ken@...>
To: <[email protected]>
Sent: Saturday, May 10, 2025 10:42 AM
Subject: Re: [repeater-builder] trying to read data on a
kenwood
851 repeater
KPG-91D will work
Ken
At 09:40 AM 5/10/2025, you wrote:
I thought my software for my 850 would work, but it says
check
radio model, retry. Does it take a different program?
Thanks.
Butch Bussen
wa0vjr
wa0vjr@...
irlp 7135
allstar 56023
echolink 790800
new home phone 785 852-1102
------------------------------------------------------------------------------
President and CTO - Arcom Controllers
Makers of repeater controllers and accessories
Phone: (503) 678 6182
Authorized Dealers for Kenwood and Telewave.
We offer complete turn-key repeater packages!
"We don't just make 'em. We use 'em!"
[]
------------------------------------------------------------------------------
President and CTO - Arcom Controllers
Makers of repeater controllers and accessories
Phone: (503) 678 6182
Authorized Dealers for Kenwood and Telewave.
We offer complete turn-key repeater packages!
"We don't just make 'em. We use 'em!"
[]
