开云体育

----- Original Message -----
From: "Chad Nelson"
To: [email protected]
Sent: Monday, April 28, 2025 09:39:17 AM
Subject: Re: [repeater-builder] 19 inch rack mount AC power strip

Chad Nelson WI9HF/WRPL979
Janesville Wisconsin
608-754-8671
Send from my spectrum iPhone 16.

On Apr 28, 2025, at 7:44?AM, Teton Amateur Radio Repeater

Association (TARRA) wrote:

?Yes, it is horizontal to mount to the rack rails.

I have been following this power strip subject. A couple of things

related to this, yes your power switch is broken. I prefer not to have a power switch inside a rack, just another source of problems. Although, maybe your power switch is also a circuit breaker, which is something different and you should probably keep. If someone can see a part number on it, you may just be able to replace it.

The other part of this, how much 120 VAC are you using in the

rack??? I can't think of much of anything to power with 120 VAC in the rack. Other than the power supply to provide the 12 VDC that is it. Everything else is 12 VDC. My repeater is a MSF5000 which is powered outside of it's cabinet. I have another cabinet under the MSF5000 and it has a power supply and again, everything runs on 12 VDC.

Mick - W7CAT

----- Original Message -----
From: "Chad Nelson"
To:
Sent: Monday, April 28, 2025 06:28:47 AM
Subject: Re: [repeater-builder] 19 inch rack mount AC power strip

Is that a horizontal mounted strip for 19 inch rack?

-----Original Message-----
From: [email protected] On Behalf Of Alex
Sent: Monday, April 28, 2025 6:37 AM
To: [email protected]
Subject: Re: [repeater-builder] 19 inch rack mount AC power strip

Take a look at the Tripplite RS-1215-20. Been using it for many

repeater projects, they work very well.

--
Untitled Document





What I'm running off of AC in my cabinet is five AC powered cooling

fans, the power supply, and a TNC, which could very well run off DC as well.

--
Untitled Document