Kevin,

Sorry for the confusion.

This is referring to the encoding of pl. nothing to do with decode. The decode portion of the radio works great...sorry for the confusion. Here is the link.

WZ5TX

David “Tyler” Bufkin

---

From: [email protected] <[email protected]> on behalf of Kevin Custer <kuggie@...>
Sent: Monday, April 21, 2025 9:01:36 PM
To: [email protected] <[email protected]>
Subject: Re: [repeater-builder] UHF 420MHZ Micor Mobile no pl encode

?

On 4/21/2025 8:44 PM, Tyler- WZ5TX via groups.io wrote:
> I have a low uhf micor mobile (old board) according to the manual.
> it did not have a decode board in it when I got it.
> i put one in it and did the mod to the board to bot key the exciter at
> all times. I must be missing a step somewhere because it will not
> transmit pl. receives pl just fine.
> Any thoughts?

Tyler,

You seem to be saying that you installed a decode board, but it doesn't
encode.? You do realize that decode and encode on a MICOR mobile
requires two vastly different boards?? If you actually installed an
encoder, but it's not encoding, is the reed vibrating? Do you see the PL
tone on the encode board with a scope?

Can you reference the modification you did (give the URL?)

Thanks,
Kevin