All,
To let everyone know what I figured out (and aid others), there are TWO places you have to set the radio to full duplex if you have a wireline card installed, there's the settings on station config *AND* on the wireline config.? It will do exactly as it was doing if the radio is set to full duplex but wireline is set to half duplex.
Thanks
--Don
toggle quoted message
Show quoted text
On 3/11/25 18:43, Don Wisdom KD7WKF via groups.io wrote:
Sure, Ill email it too you directly now however its not working again :(
On 3/11/25 18:40, dsay2001 via groups.io wrote:
I'm starting to work on a similar setup...would you be willing to share the codeplug file?
Don
On Tue, Mar 11, 2025, 5:18 PM Don Wisdom KD7WKF via groups.io < groups.io> <dwisdom-lists@... <mailto:wiztech.biz@groups.io>> wrote:
??? All,
??? I redid the codeplug from scratch and off it went!
??? Thanks!
??? --Don
??? On 3/11/25 17:50, Don Wisdom KD7WKF via groups.io <>
??? wrote:
???? > Chris,
???? >
???? > other thing too, I looked at the station operation controls and
??? briefly
???? > rx mode says active then switches back to inactive.
???? >
???? > Thanks
???? >
???? > --Don
???? >
???? >
???? > On 3/11/25 17:14, Don Wisdom KD7WKF via groups.io <
??? groups.io> wrote:
???? >> Hi Chris,
???? >>
???? >> The USB-RIM is set to use an active high signal for both COS and
???? >> CTCSS. ??I have the PL line set in the wildcard however I just
??? noticed
???? >> that there isnt a output for pin C2 in the output group settings.
???? >> There is an output for pin C4.
???? >>
???? >> Other thing the wildcard checkbox is greyed out on the system
???? >> configuration screen.
???? >>
???? >> Thanks
???? >>
???? >> --Don
???? >>
???? >>
???? >> On 3/11/25 04:37, Chris Boone WB5ITT via groups.io <
??? groups.io> wrote:
???? >>> Wildcard programmed in the MTR? I take it you're using a
??? transistor
???? >>> inverter to talk to the USB which normally requires a low going
??? signal?
???? >>>
???? >>> Chris WB5ITT
???? >>>
???? >>>
???? >>> On Mon, Mar 10, 2025, 7:48 PM Don Wisdom KD7WKF via groups.io
??? <>
???? >>> < groups.io <>> <dwisdom-
??? lists@... <mailto:wiztech.biz@groups.io>
???? >>> <mailto:wiztech.biz@groups.io <mailto:wiztech.biz@groups.io>>>
??? wrote:
???? >>>
???? >>> ??? All,
???? >>>
???? >>> ??? I have a MTR2000 here that I have interfaced to a USB-RIM
??? module, I
???? >>> ??? have
???? >>> ??? it working in COS mode but want to run a ctcss code on it.
???? >>>
???? >>> ??? I was curious does anyone know if anything special needs to be
???? >>> set for
???? >>> ??? the ctcss valid pin to go high to tell the RIM that the
??? correct PL/
???? >>> ??? ctcss
???? >>> ??? is valid?? I cant get the ctcss lead to go high to tell the
??? RIM that
???? >>> ??? there's a valid ctcss code.? When I key up my handheld with
??? the
???? >>> correct
???? >>> ??? ctcss code on it it initially says keyed under the signal
??? status.
???? >>>
???? >>> ??? Ive tried several mixtures of settings.
???? >>>
???? >>> ??? Under Audio I have Analog RX Activation set to PL
???? >>>
???? >>> ??? Under channel info I have decoder set to RX PL of 67.0
???? >>>
???? >>> ??? I am using the ICS-CTRL MTR2000 Adapter board that goes to
??? a DB9.
???? >>> Its
???? >>> ??? pulling from C2 for PL Detect & B4 for COR.
???? >>>
???? >>> ??? Thanks!
???? >>>
???? >>> ??? --Don
???? >>>
???? >>>
???? >>>
???? >>>
???? >>>
???? >>>
???? >>>
???? >>>
???? >>>
------------------------------------------------------------------------
???? >>>
???? >>> This email has been scanned for spam and viruses by Proofpoint
???? >>> Essentials. Click here <
??? app/ <>
???? >>> report_spam.php?
???? >>>
mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5f577f6a7f4e1a88ac1d47bcf2c53d3807385ae2230f669c04048c6c78d9bac1307256a11a78a76a955c538c168c47ac2eb53d690026f4a2a3b24ef7fa5b3911d564f8dbe210224514c9cc909bd3d3be91e95469ebc24d1ea94a992d70e93442cfe28dfa80f47b21b1e16199b16adabd4cc8359d84e790de32176bacd6b6cc60ea079127f6ade61e1518c4bd5e858013e0363796f47a18b838> to report this email as spam.
???? >>>
???? >>>
???? >>
???? >>
???? >>
???? >>
???? >>
???? >>
???? >>
???? >> ----------
???? >>
???? >> This email has been scanned for spam and viruses by Proofpoint
???? >> Essentials. Visit the following link to report this email as spam:
???? >>
<>?
???? >>
mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5fc124d7e359c0d931f2618bd4777537955025669c4cf03fbe99daf3923a58ea73990e0d86747fc4d1b18ff00d2263c17201ddcec68a653397c319c237ef69e76f78ed58917ce4e103b50f0eb39c5640e327fd772d2ec5d79d5e79df9ca63b9a86ac2d84a5e79c87925a3595804ba1925c02312a0f20980ca0555e4fcb2c18f1b089368b4c847fd1f79a210fa75aeca9c2f7135b3aaa366784
???? >>
???? >
???? >
???? >
???? >
???? >
???? >
???? >
???? > ----------
???? >
???? > This email has been scanned for spam and viruses by Proofpoint
???? > Essentials. Visit the following link to report this email as spam:
???? >
<>?
???? >
mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5f6725180200ff49e6d753862a952d3867fbc6f5fe2e9e45705148e8e30859920fde9ceff2211e585aaf2265ab029c0d0b40090765fef6ae20dc2d4bdcd027f592db12b9b429de9de779b55cf175a013dfe33f0015ad9bc8b7ad9583f0810356fa3797bf5ce12a4a46631b36bda83b988d84421fc44e088725e2d167c92a1c677e909d7499a35e542e0d72793b2f5c9dfe84ebda61eba7d88a
???? >
------------------------------------------------------------------------
This email has been scanned for spam and viruses by Proofpoint Essentials. Click here < report_spam.php? mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5fee34ff1a185c1d35060d41d9e67985d4ae98901ed6bbeeb13416feec750e1dca4256c6e581eb51fb6e812ec19c124f543296b38ad13df1c0f78a4d3db07e5b43a18bc0d2b8dd326d45d36a4c07ad46ece63c6acd3909dab3f41b9f44dd331933fcf71c3405ee9a27e78d1b510db6acd1944de2b04b0960a785665afc0097d15e4be3048d03c8da6718c6a412ea49b255e2644e5b3fe1e5a4> to report this email as spam.
----------
This email has been scanned for spam and viruses by Proofpoint Essentials. Visit the following link to report this email as spam:
