Re: MTR2000 PL Decode question
|
I'm starting to work on a similar setup...would you be willing to share the codeplug file?
Don
On Tue, Mar 11, 2025, 5:18 PM Don Wisdom KD7WKF via <dwisdom-lists= [email protected]> wrote: All,
I redid the codeplug from scratch and off it went!
Thanks!
--Don
On 3/11/25 17:50, Don Wisdom KD7WKF via wrote:
> Chris,
>
> other thing too, I looked at the station operation controls and briefly
> rx mode says active then switches back to inactive.
>
> Thanks
>
> --Don
>
>
> On 3/11/25 17:14, Don Wisdom KD7WKF via wrote:
>> Hi Chris,
>>
>> The USB-RIM is set to use an active high signal for both COS and
>> CTCSS. ??I have the PL line set in the wildcard however I just noticed
>> that there isnt a output for pin C2 in the output group settings.?
>> There is an output for pin C4.
>>
>> Other thing the wildcard checkbox is greyed out on the system
>> configuration screen.
>>
>> Thanks
>>
>> --Don
>>
>>
>> On 3/11/25 04:37, Chris Boone WB5ITT via wrote:
>>> Wildcard programmed in the MTR? I take it you're using a transistor
>>> inverter to talk to the USB which normally requires a low going signal?
>>>
>>> Chris WB5ITT
>>>
>>>
>>> On Mon, Mar 10, 2025, 7:48 PM Don Wisdom KD7WKF via
>>> <http:// > <dwisdom-lists=[email protected]
>>> <mailto:[email protected]>> wrote:
>>>
>>> ??? All,
>>>
>>> ??? I have a MTR2000 here that I have interfaced to a USB-RIM module, I
>>> ??? have
>>> ??? it working in COS mode but want to run a ctcss code on it.
>>>
>>> ??? I was curious does anyone know if anything special needs to be
>>> set for
>>> ??? the ctcss valid pin to go high to tell the RIM that the correct PL/
>>> ??? ctcss
>>> ??? is valid?? I cant get the ctcss lead to go high to tell the RIM that
>>> ??? there's a valid ctcss code.? When I key up my handheld with the
>>> correct
>>> ??? ctcss code on it it initially says keyed under the signal status.
>>>
>>> ??? Ive tried several mixtures of settings.
>>>
>>> ??? Under Audio I have Analog RX Activation set to PL
>>>
>>> ??? Under channel info I have decoder set to RX PL of 67.0
>>>
>>> ??? I am using the ICS-CTRL MTR2000 Adapter board that goes to a DB9.
>>> Its
>>> ??? pulling from C2 for PL Detect & B4 for COR.
>>>
>>> ??? Thanks!
>>>
>>> ??? --Don
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> This email has been scanned for spam and viruses by Proofpoint
>>> Essentials. Click here <
>>> report_spam.php?
>>> mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5f577f6a7f4e1a88ac1d47bcf2c53d3807385ae2230f669c04048c6c78d9bac1307256a11a78a76a955c538c168c47ac2eb53d690026f4a2a3b24ef7fa5b3911d564f8dbe210224514c9cc909bd3d3be91e95469ebc24d1ea94a992d70e93442cfe28dfa80f47b21b1e16199b16adabd4cc8359d84e790de32176bacd6b6cc60ea079127f6ade61e1518c4bd5e858013e0363796f47a18b838> to report this email as spam.
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>> ----------
>>
>> This email has been scanned for spam and viruses by Proofpoint
>> Essentials. Visit the following link to report this email as spam:
>> ?
>> mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5fc124d7e359c0d931f2618bd4777537955025669c4cf03fbe99daf3923a58ea73990e0d86747fc4d1b18ff00d2263c17201ddcec68a653397c319c237ef69e76f78ed58917ce4e103b50f0eb39c5640e327fd772d2ec5d79d5e79df9ca63b9a86ac2d84a5e79c87925a3595804ba1925c02312a0f20980ca0555e4fcb2c18f1b089368b4c847fd1f79a210fa75aeca9c2f7135b3aaa366784
>>
>
>
>
>
>
>
>
> ----------
>
> This email has been scanned for spam and viruses by Proofpoint
> Essentials. Visit the following link to report this email as spam:
> ?
> mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5f6725180200ff49e6d753862a952d3867fbc6f5fe2e9e45705148e8e30859920fde9ceff2211e585aaf2265ab029c0d0b40090765fef6ae20dc2d4bdcd027f592db12b9b429de9de779b55cf175a013dfe33f0015ad9bc8b7ad9583f0810356fa3797bf5ce12a4a46631b36bda83b988d84421fc44e088725e2d167c92a1c677e909d7499a35e542e0d72793b2f5c9dfe84ebda61eba7d88a
>
|
