Re: Voice ID'er for P25 Repeater
|
It sure would help if you would quote the post you are talking about
toggle quoted message
Show quoted text
rather than make many of us guess. Mick - W7CAT ----- Original Message -----
From: "Joe Borovetz j.borovetz@... [Repeater-Builder]" To: "Repeater-Builder@..." Sent: Friday, September 14, 2018 11:32:14 AM Subject: [Repeater-Builder] Re: Voice ID'er for P25 Repeater > Items 2 and 3 in the previous post are both wrong. > Radio Reference is the last place that I would even think about looking for P25 hardware information. > You cannot get analog audio out of a P25 repeater at the wireline port when running in P25 mode. > There is enough bad information floating around out there without folks adding to it. > Without a lot of technical expertise and the hardware and software to do so running a voice ID on a P25 repeater in P25 mode is not the easiest thing to do. > Run the repeater in mixed mode operation and feed the ID in as analog audio on the repeater in analog mode. Program your radios to operate in mixed mode. > Even this is difficult unless you know how to program the wildcard settings, I am assuming you are using a Quantar. > > Buy a Northcomm Technologies cable and they will send you the instructions for programming the wildcard settings. > Otherwise be prepared to get into the world of the DIU3000 and V.24 connections to the Quantar. > -- Untitled Document Be sure to check out all the latest at our web site <;! <; 
|