Re: Voice ID'er for P25 Repeater
|
Items 2 and 3 in the previous post are both wrong.
Radio Reference is the last place that I would even think about looking for P25 hardware information.
You cannot get analog audio out of a P25 repeater at the wireline port when running in P25 mode.
There is enough bad information floating around out there without folks adding to it.
Without a lot of technical expertise and the hardware and software to do so running a voice ID on a P25 repeater in P25 mode is not the easiest thing to do.
Run the repeater in mixed mode operation and feed the ID in as analog audio on the repeater in analog mode. Program your radios to operate in mixed mode.
Even this is difficult unless you know how to program the wildcard settings, I am assuming you are using a Quantar.
Buy a Northcomm Technologies cable and they will send you the instructions for programming the wildcard settings.
Otherwise be prepared to get into the world of the DIU3000 and V.24 connections to the Quantar.
|
