|
Buna seara Adrian,
toggle quoted message
Show quoted text
multumesc for the quick answer. No success so far, but some very good hints. The most interesting finding comes from the service menu. I am sure now that it's hunting on the correct frequency. Also I can see that during hunting, it stays a little bit longer on the channel that is actually transmitting. RSSI on the correct channel is about -70dBm. Thats very good progress. I have never heard transmissions on the radio's TX frequency. As I said, I am pretty much sure that the SDR is transmitting sensible DMR, as I could communicate over one of the channels directly to brandmeister in Tier II Mode with the same Hytera radio. Also, when I subscribe a static channel and it appears on TS2 of the control channel, I can hear it in monitor mode on my Anytone. For some reason, the Hytera is receiving, but not accepting the base station. Some System Code foo that I still need to find out. So the system code needs to go Network/Network 00.000000001.001 Hunt/Fixed TSCC, last column 9 Trunking Controller, Setting/General Setting, System Identity Code: 9 MMDVMhost, Section DMR, SystemCode=9 Somewhere else? One point I am wondering about: What needs to go into Setting/General Settinge/Base frequency in the trunking controller. The Transmit Frequency of the radio or of the base station? Setting/General Settinge/Duplex split in the controller is TX - RX or RX-TX? Of Radio or of Base Station? Also, in the Logical Physical Channel Map: is it RX/TX frequency of radio or of base station? Next steps tomorrow. Multumesc again! 73 Christian DB9CR Am 10.06.2024 um 21:37 schrieb Adrian M: And the second part, some screenshots of the radio menus, although they may |
