开云体育

Hello Christian, That is indeed wrong and explains why the radio doesn't attempt registration. On an idle control channel, most of the PDUs should be C_ALOHA (95% of the time). DSD-FME decodes them as

Hello Adrian, got my RTL stick back. SDRTrunk on Windows was not able to recognize my Stick. On Linux, it didn't start at all. I finally got dsd-fme running. # cat dmr_t3_chan.csv

Greetings, A new feature is being developed at the moment to complement the frequency domain and constellation displays: time domain display. You may want to contribute some suggestions regarding the

Hello Adrian, Am 11.06.2024 um 10:00 schrieb Adrian M: Yes, need to do that. Unfortunately, my RTLStick is currently not here - was used for a Repeater test bya fellow OM. Need to wait until it is

Greetings again Christian. Replies inline below: Just to be sure, if I were you I'd use a tool like dsd-fme or SDRTrunk with an RTL dongle or similar just to check that the control channel parameters

Buna seara Adrian, multumesc for the quick answer. No success so far, but some very good hints. The most interesting finding comes from the service menu. I am sure now that it's hunting on the correct

Some further troubleshooting information (and I guess I should put this in the documentation as well): 1. To check if the Control Channel is being transmitted at all - use a program like SDRTrunk or

And the second part, some screenshots of the radio menus, although they may not be much use if you haven't got it to register yet. You might also want to send me your qradiolink.cfg file, just to

Hi Christian, I don't normally allow attachments here, but now I'll have to send a few screenshots in case it helps you. It appears you got most of the settings correct, except I have a few doubts

Hello, I have set up a PC with LimeSDR mini, MMDVM-SDR, MMDVMHost-SDR, DMRGateway, dmrtc and qradiolink according to documentation on https://qradiolink.org/docs/MMDVM/MMDVM.html I get a steady DMR

Changelog for version 0.8.12-1: * Consolidate DMR Tier III base station functions * Direct support for Ettus USRP via gnuradio-uhd and libuhd * Reduced roundtrip latency to half (350 ms) for the DMR

Hello, As part of the next release, qradiolink will get native support for Ettus USRP and other UHD devices via gr-uhd. This means you will be able to use USRPs directly without going through gr-

Hi Waldek, I've pushed this new feature to branch next. I've moved the config settings around a bit, and there's now a separate tab for UDP streaming settings. You can now set the local IP address as

Thanks, really appreciate it, unfortunately I don't have a Discord account so that link doesn't show anything but the Discord homepage. BR, Adrian

this was ment to go direct sorry. just a invite as I am working to make it so that there is a resource for all things sdr. and giving adrian a linkif he wish to join. Thanks again for your work adrian

https://discord.gg/K3df8EdX?

Ok I also have an update of libs for bookworm . I managed to get it to build on a arm64 desktop. I would also like to see it intake ported to build and work Mac I will post the lib changes shortly

Hi Richard, You can just copy the qradiolink binary from the build/ directory to /usr/bin or whatever other path you need, or even just run it in place. There is no install target since the deb

I am building on Debian BookWorm . I use the build_debian.sh but but it has no install in it. and if you cd to build and do make install it says there is no install option. is there a update to the

Hi Emiliano, Many thanks for this information and apologies for the delay in replying. I only saw this message now in the approval queue, so I'm bumping the topic in case there are any Fedora users