开云体育

Hi all, this is my first post in QLog mailing list. I've just trying it and it looks very well. I'd like to ask for a couple of features to take into account for future releases, if it was

Let me inform you that a new QLog release v0.37.2 is finished. Changelog: - Fixed Field QSL Send Via should be retained (issue #413) - Fixed Set rotator position fails if azimuth > 180 (issue

then you duplicate all these settings in all applications. Isn't this the reason why it was designed so that it is set at the system level and applications take over this setting? In the other words,

Because it is much easier and more convenient for the user to make this change to the single application than to the entire operating system. Whatever the reasons are.

I would like to ask, why do you use UK settings? It's not my goal to have QLog set up for everything. This leads to an explosion setting dialog. If QLog has information about the settings from the OS

Hi Ladislav Yes I run my win10 in UK language, but it would be nice if it could be set up in Qlog to use km or miles.... somewhere in the config area 73" Ben Send from my mobile office. tor. 25.

The units are controlled by OS settings under Windows OS (Language and Country setting). If you have one of the following option then you will have "miles" English && United States Spanish && United

I run it on a windows 10 pc..... Den ons. 24. jul. 2024 kl. 20.06 skrev ok1mlg via groups.io <ok1mlg= [email protected]>:

Already registered as Github Issues #392 <https://github.com/foldynl/QLog/issues/392>. And #408 <https://github.com/foldynl/QLog/issues/408> of which you are the author.. Regards Ladislav st 24. 7.

Please, see QLog WIKI <https://github.com/foldynl/QLog/wiki/Multi-language-Support#distance-unit>. If you have Linux then LC_MEASUREMENT is the variable which controls units in the

Hi .... How do I set it up to use km in the 'Distance', at the moment it show miles.... 73" OZ1CT Ben

HI Ladislav ok I got it up and running.... 1. you have to enable 'Window' : Rig 2. Equipment Connect Rig 3. select the radio you have in *Rig* via the drop down menu. But if you change 'Rig' then

HI Ben, it seems that you did not use the "Anvalina HF" TCI profile. You got a connection error that is from Hamlib. It means that you used a profile that had the Hamlib Interface

OK, In order to move forward, I have opened a poll for this feature request. Please, those who can, express your opinion in this

Hi Ladislav I am trying to get Qlog to connect to my Anvelina SDR running TCI, I use Thetis and have set it up as you can see in picture but when I try to "Connect RIG" it give me this error: any

Dave and Ladislav I reply to both, right the reasoning is correct, but how many times out of 100 QSOs do we have a different grid or a /...? I did a check on the 7000 FT8 QSOs I have in my log and

For a real-world case, check out my friend Lori as she and Dave went across the country, activating many grid squares as they went. (see: https://www.qrz.com/db/KO4YIN ) Can you imagine how much of my

OK. I will give you another example, which, however, is based on what I describe on Github. I don't know how often operators use /p with FT8, but as far as I can remember, I haven't seen anything like

QLog should be a community project. Therefore, it is not just my code or my castle. I can be wrong in many cases, which is normal but there is a need to maintain some direction in its development.

You are absolutely right at this point. Your code is your castle. Thank you for the informative discussion. -- _ _ _ 73, Slav, EI6KW / SP3RXO https://www.hamqth.com/ei6kw