开云体育

Ladislav good morning,
here is what is requested:
Radio Flex 6400 in DIGU mode
JTDX in FT8 mode

Qlog open in SSB/USB

Active Qlog radio card with the following parameters:
Hamlib interface, FlexRadio 6xxx (20220306.0)
flags on: Mode, VFO, Frequency, clear QSY, CW keyer speed, sync CW speed
Polling 100 ms
Port type: network

?

DX cluster configured on Hamqth.com:7300 (for now)
cluster filters mode: CW, Digital, FT8

test 1-

spot?cluster FT8 mode frequency 28.074 - double click
result: Frequency ok on radio, jtdx and qlog
callsign ok on qlog
mode on? radio:USB
mode on qlog: SSB/USB

test 2-

spot?cluster CW mode frequency 14.151 - double click
result: Frequency ok on radio, qlog
callsign ok on qlog
mode on radio: CW
mode on qlog: CW

test 3-

spot?cluster mode DIGITAL frequency 7.0470 - double click
result: Frequency ok on radio, (JTDX) and qlog
callsign ok on qlog
mode on radio: LSB
mode on qlog: SSB/LSB

If you need more info just ask
thanks
73 Roberto IU2NUB

Good morning,
I have a problem with both versions of qlog (Mac and w11)
If I call a callsign from the DX Cluster window, the frequency and the callsign are correctly passed to the radio (FLEX6400), to jtdx and to qlog, but the mode is not correct, in any case it only passes USB on high bands and LSB on low ones.
This happens only in digital modes in cw everything is correct (I have not tried in SSB, I do not have microphones :) )
73 Roberto IU2NUB

No email yet. But one additional question. Do you have any undocked window?

ne 1. 12. 2024 v?9:12 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

hi? Ladislav

The File is on the way to you...hope you can fix it !

73" Ben

Den s?n. 1. dec. 2024 kl. 08.36 skrev ok1mlg via <ok1mlg=[email protected]>:

Please send it to my private email. My email is my callsign @ (alternatively, you can find it on QRZ.com or on my GitHub profile: )

so 30. 11. 2024 v?21:02 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

Do I send it here to the group or can you give me an email address????

Ben

Den l?r. 30. nov. 2024 kl. 20.52 skrev ok1mlg via <ok1mlg=[email protected]>:

confirmed.

UNIQUE constraint failed:

You already have the 8m band in the band table. I don't want to speculate on how it was done, but it's not an installation.

You have two options how to fix it:

1) You will remove the 8m band record from the band table via an external application.

2) If you don't know how to do it, send me your database to my email (zip it before sending if it is a large database). I'll edit it and send it back. Where you can find the database is on the Wiki

.

so 30. 11. 2024 v?20:18 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

here you have it:

20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force false [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup skipped [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:101]
20:16:50.102 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:21]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup before migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:38]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force true [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList(QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240919153734.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240930181517.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007145137.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241018.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241102.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241112.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241119.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241124.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241130.adx)) [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:125]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Exporting a Database backup to ?"C:/Users/Bent/AppData/Local/hamradio/QLog/qlog_backup_20241130.adx" [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:169]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Database backup finished [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:180]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Starting database migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:41]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:230]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => migrate to 31 [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:232]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:257]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ?[qlog.core.migration.function.parameters] => ":/res/sql/migration_031.sql" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:259]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList("INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)", " ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:265]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => "INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:272]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QSqlError("2067", "Kunne ikke hente r?kke", "UNIQUE constraint failed: ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:277]?

Den l?r. 30. nov. 2024 kl. 20.10 skrev ok1mlg via <ok1mlg=[email protected]>:

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?

This issue has never been reported. I am using Ubuntu 24.04. You will
need to send me a full debug log.

run qlog with the debug option and them immediately stop it via File-
>Exit and them kill it - It will generate a large log so please
compress it send me it to my private email (my callsign @gmail.com)

|QT_LOGGING_RULES=*.debug=true ./qlog > ~/qlog.debug.log
|
|
|
|
|
|
|

ne 1. 12. 2024 v?8:48 odesílatel DK7OB via groups.io <>
<wolfgang.fritz@... <mailto:[email protected]>> napsal:

Hi,

I don't know how to properly exit qlog. Using Menu File -> Exit or
pressing CTRL-C in the main window only closes the window. The qlog
process keeps running and other open windows stay open.

I could not find any hints in this group or the Wiki.

OS is Kubuntu 24.04. Tested with 0.39, 0.40 and local build from current
github master.

What am I doing wrong?

Wolf, DK7OB

hi? Ladislav

The File is on the way to you...hope you can fix it !

73" Ben

Den s?n. 1. dec. 2024 kl. 08.36 skrev ok1mlg via <ok1mlg=[email protected]>:

Please send it to my private email. My email is my callsign @ (alternatively, you can find it on QRZ.com or on my GitHub profile: )

so 30. 11. 2024 v?21:02 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

Do I send it here to the group or can you give me an email address????

Ben

Den l?r. 30. nov. 2024 kl. 20.52 skrev ok1mlg via <ok1mlg=[email protected]>:

confirmed.

UNIQUE constraint failed:

You already have the 8m band in the band table. I don't want to speculate on how it was done, but it's not an installation.

You have two options how to fix it:

1) You will remove the 8m band record from the band table via an external application.

2) If you don't know how to do it, send me your database to my email (zip it before sending if it is a large database). I'll edit it and send it back. Where you can find the database is on the Wiki

.

so 30. 11. 2024 v?20:18 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

here you have it:

20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force false [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup skipped [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:101]
20:16:50.102 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:21]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup before migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:38]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force true [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList(QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240919153734.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240930181517.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007145137.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241018.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241102.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241112.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241119.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241124.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241130.adx)) [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:125]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Exporting a Database backup to ?"C:/Users/Bent/AppData/Local/hamradio/QLog/qlog_backup_20241130.adx" [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:169]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Database backup finished [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:180]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Starting database migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:41]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:230]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => migrate to 31 [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:232]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:257]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ?[qlog.core.migration.function.parameters] => ":/res/sql/migration_031.sql" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:259]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList("INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)", " ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:265]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => "INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:272]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QSqlError("2067", "Kunne ikke hente r?kke", "UNIQUE constraint failed: ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:277]?

Den l?r. 30. nov. 2024 kl. 20.10 skrev ok1mlg via <ok1mlg=[email protected]>:

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?

Please send it to my private email. My email is my callsign @ (alternatively, you can find it on QRZ.com or on my GitHub profile: )

so 30. 11. 2024 v?21:02 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

Do I send it here to the group or can you give me an email address????

Ben

Den l?r. 30. nov. 2024 kl. 20.52 skrev ok1mlg via <ok1mlg=[email protected]>:

confirmed.

UNIQUE constraint failed:

You already have the 8m band in the band table. I don't want to speculate on how it was done, but it's not an installation.

You have two options how to fix it:

1) You will remove the 8m band record from the band table via an external application.

2) If you don't know how to do it, send me your database to my email (zip it before sending if it is a large database). I'll edit it and send it back. Where you can find the database is on the Wiki

.

so 30. 11. 2024 v?20:18 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

here you have it:

20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force false [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup skipped [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:101]
20:16:50.102 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:21]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup before migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:38]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force true [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList(QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240919153734.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240930181517.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007145137.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241018.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241102.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241112.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241119.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241124.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241130.adx)) [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:125]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Exporting a Database backup to ?"C:/Users/Bent/AppData/Local/hamradio/QLog/qlog_backup_20241130.adx" [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:169]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Database backup finished [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:180]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Starting database migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:41]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:230]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => migrate to 31 [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:232]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:257]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ?[qlog.core.migration.function.parameters] => ":/res/sql/migration_031.sql" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:259]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList("INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)", " ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:265]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => "INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:272]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QSqlError("2067", "Kunne ikke hente r?kke", "UNIQUE constraint failed: ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:277]?

Den l?r. 30. nov. 2024 kl. 20.10 skrev ok1mlg via <ok1mlg=[email protected]>:

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?

Hi,

I don't know how to properly exit qlog. Using Menu File -> Exit or
pressing CTRL-C in the main window only closes the window. The qlog
process keeps running and other open windows stay open.

I could not find any hints in this group or the Wiki.

OS is Kubuntu 24.04. Tested with 0.39, 0.40 and local build from current
github master.

What am I doing wrong?

Wolf, DK7OB

Do I send it here to the group or can you give me an email address????

Ben

Den l?r. 30. nov. 2024 kl. 20.52 skrev ok1mlg via <ok1mlg=[email protected]>:

confirmed.

UNIQUE constraint failed:

You already have the 8m band in the band table. I don't want to speculate on how it was done, but it's not an installation.

You have two options how to fix it:

1) You will remove the 8m band record from the band table via an external application.

2) If you don't know how to do it, send me your database to my email (zip it before sending if it is a large database). I'll edit it and send it back. Where you can find the database is on the Wiki

.

so 30. 11. 2024 v?20:18 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

here you have it:

20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force false [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup skipped [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:101]
20:16:50.102 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:21]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup before migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:38]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force true [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList(QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240919153734.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240930181517.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007145137.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241018.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241102.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241112.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241119.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241124.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241130.adx)) [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:125]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Exporting a Database backup to ?"C:/Users/Bent/AppData/Local/hamradio/QLog/qlog_backup_20241130.adx" [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:169]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Database backup finished [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:180]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Starting database migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:41]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:230]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => migrate to 31 [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:232]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:257]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ?[qlog.core.migration.function.parameters] => ":/res/sql/migration_031.sql" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:259]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList("INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)", " ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:265]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => "INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:272]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QSqlError("2067", "Kunne ikke hente r?kke", "UNIQUE constraint failed: ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:277]?

Den l?r. 30. nov. 2024 kl. 20.10 skrev ok1mlg via <ok1mlg=[email protected]>:

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?

confirmed.

UNIQUE constraint failed:

You already have the 8m band in the band table. I don't want to speculate on how it was done, but it's not an installation.

You have two options how to fix it:

1) You will remove the 8m band record from the band table via an external application.

2) If you don't know how to do it, send me your database to my email (zip it before sending if it is a large database). I'll edit it and send it back. Where you can find the database is on the Wiki

.

so 30. 11. 2024 v?20:18 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

here you have it:

20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force false [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup skipped [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:101]
20:16:50.102 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:21]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup before migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:38]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force true [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList(QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240919153734.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240930181517.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007145137.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241018.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241102.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241112.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241119.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241124.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241130.adx)) [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:125]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Exporting a Database backup to ?"C:/Users/Bent/AppData/Local/hamradio/QLog/qlog_backup_20241130.adx" [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:169]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Database backup finished [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:180]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Starting database migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:41]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:230]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => migrate to 31 [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:232]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:257]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ?[qlog.core.migration.function.parameters] => ":/res/sql/migration_031.sql" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:259]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList("INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)", " ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:265]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => "INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:272]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QSqlError("2067", "Kunne ikke hente r?kke", "UNIQUE constraint failed: ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:277]?

Den l?r. 30. nov. 2024 kl. 20.10 skrev ok1mlg via <ok1mlg=[email protected]>:

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?

here you have it:

20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force false [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.101 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup skipped [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:101]
20:16:50.102 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:21]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Backup before migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:38]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:85]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => The last backup date QDate("2024-11-30") Force true [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:94]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList(QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240919153734.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20240930181517.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241007145137.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241018.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241102.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241112.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241119.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241124.adx), QFileInfo(C:\Users\Bent\AppData\Local\hamradio\QLog\qlog_backup_20241130.adx)) [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:125]
20:16:50.103 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Exporting a Database backup to ?"C:/Users/Bent/AppData/Local/hamradio/QLog/qlog_backup_20241130.adx" [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:169]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Database backup finished [bool __cdecl Migration::backupDatabase(bool):..\QLog\core\Migration.cpp:180]
20:16:50.988 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => Starting database migration [bool __cdecl Migration::run(void):..\QLog\core\Migration.cpp:41]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:188]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => 30 [int __cdecl Migration::getVersion(void):..\QLog\core\Migration.cpp:194]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:230]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => migrate to 31 [bool __cdecl Migration::migrate(int):..\QLog\core\Migration.cpp:232]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? [qlog.core.migration.function.entered] => *** [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:257]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ?[qlog.core.migration.function.parameters] => ":/res/sql/migration_031.sql" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:259]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QList("INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)", " ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:265]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => "INSERT INTO bands (name, start_freq, end_freq, enabled) VALUES ('8m',40.0, 45.0, 0)" [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:272]
20:16:51.000 [DEBUG ? ] [0x4150] ? ? ? ? ? ? ? ? ? ? ?[qlog.core.migration.runtime] => QSqlError("2067", "Kunne ikke hente r?kke", "UNIQUE constraint failed: ") [bool __cdecl Migration::runSqlFile(class QString):..\QLog\core\Migration.cpp:277]?

Den l?r. 30. nov. 2024 kl. 20.10 skrev ok1mlg via <ok1mlg=[email protected]>:

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?

OK...windows...

1) start command line

cmd

2) jump to QLog system dir

cd c:\Program Files\QLog

3) type follow command

set QT_LOGGING_RULES=qlog.core.migration.*=true

4) start qlog with following parameters

qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1

Please, replace <YOUR_HOME> the folder, where you have your Home dir.

It will generate a debug.txt file in your home directory. Please, send me the file.

Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.

so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I use this one for windows:

and install?it as standard !

Ben?

Den l?r. 30. nov. 2024 kl. 19.17 skrev ok1mlg via <ok1mlg=[email protected]>:

you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?

so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

I cannot?start Qlog.... and I did not add the 8m Band to the?database

if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !

Ben

Den l?r. 30. nov. 2024 kl. 18.07 skrev ok1mlg via <ok1mlg=[email protected]>:

Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog

so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

sorry but last working ver is for me 0.40 and there is no 8m band in it....

how to fix this problem ??? and I havent got a copy of 0.40 :-(

Ben

Den l?r. 30. nov. 2024 kl. 17.37 skrev ok1mlg via <ok1mlg=[email protected]>:

If you already have an 8m band in the databa, then remove it. The release adds the record for it.

so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin=[email protected]> napsal:

just updated to v0.40.1 and get this screen:

?