开云体育

A lot of Chris' on this group! LOL The homepage: www.Network105.org has a wealth of info as outlined by Burt. What additional information would you like to see? Chris Lance WW2BSA Moderator Network105

I'm not sure if I am echoing what you are saying and apologize in advance if I am misunderstanding what you are saying: a CW ID isn't necessary on packet because you call is already included in the

Hi Chris, I would like to make a suggestion if I may. Is there anyway that there could be a “FAQ” of sorts on the home page/directions of suggested other locations for packet traffic that have

I will say though that LID comments are unnecessary and I did want to clarify some things. We’re all forever learning here. CWID is identifying via CW instead of packet. That’s not the same as

On Sun, Sep 17, 2023 at 07:54 AM, Gary - K7EK wrote: > > And another very annoying, unnecessary, and irresponsible action is > CWID's. Turn 'em off, guys (if your software permits, as it should)! FCC

And another very annoying, unnecessary, and irresponsible action is CWID's. Turn 'em off, guys (if your software permits, as it should)! FCC rules permit us to identify in the mode of transmission, AX

Hello, I've now properly configured my node so that the N6CTA (N6CTA-0) SSID will drop into a proper simple TNC:TNC K2K chat. This can also be accessed by using the SYSOP command while connected to

Hey All, I'm not a rules stickler but a significant number of stations I hear are not following the suggestions set out by the originator of this network. I readily admit to having a few mistakes in

Hi Rich, Thanks for the reply. My choice of slot will have to come down to visible traffic on that day - nobody likes the person who drives in the fast lane. I want to make my 10 contacts to make my

I don't use VarAC at all but given the freq you mention you may end up competing with Winlink wide VARA, ARDOP, and Pactor sigs. I've had a RMS gateway available on dial 14107 with center 14108.5 for

Hello, I was planning on activating this Thursday Sept 14 using VarAC on 14.108 (slot 14). Has anyone else used VarAC as an operating mode for POTA? Any suggestions? Leo, VE3ZLG

Are you available m 14.105 LSB? My mark and space tones are set to 1600/1800 and it works fine... I had a Kam Plus, loved it! Maybe upgrade to the XL or go sound card? Garry (AE5HL)

I'm wondering if anyone has used a KamPlus for Linbpq? I have the VHF port set up and it works great but, I can't get the HF port to work properly. I can send a connect request to a nearby station and

On Mon, Sep 11, 2023 at 06:41 PM, Louis Botterill wrote: > > Hi, > > Yes exactly that. I am not really sure why that particular config is in > the web-ui rather than the main config file but anyways

Hi, Yes exactly that. I am not really sure why that particular config is in the web-ui rather than the main config file but anyways yes that’s it. I am new also. What I heard from others is

I think I found out what you meant Louis, the per port beaconing is set via the web interface in linux! I'm happy to have found it. I may reconfigure how I send IDs and Beacons now that I can actually

Guys, My settings with the software and radio are just fine. I'm in Casper WY right now, set up portable at the top of the mountain range with my 20 watt radio and 20m dipole in inverted V

On Sat, Sep 9, 2023 at 04:54 AM, Louis Botterill wrote: > > > When I first switched to agw I found ID ‘beacon’ no longer worked, turns > out it is only for kiss mode. This would be same regardless

Home | VarAC | | | | | | | | | | | Home | VarAC VarAC is a modern HF P2P real-time chat application for the hamradio operator, using the VARA protocol | | |

When I first switched to agw I found ID ‘beacon’ no longer worked, turns out it is only for kiss mode. This would be same regardless direwolf or sm. I changed it to do the same with a port