开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Network105
  2. Messages
Expanded Topics Messages Polls
Date
Re: How to connect?

 

开云体育

Hi – update … got it to work … my mistake was that I tried to connect / disconnect while still being in Channel 0 … switched to channel 1 and was able to connect to N0HI-7 right away…. Nice!!

Thanks so much and 73

Tom KI5BLU

?

From: Thomas Frese
Sent: Monday, September 2, 2024 10:38 AM
To: [email protected]
Subject: RE: [network105] How to connect?

?

Hi Dave,

?

Thank you for the reply!

TNC lights – power light is on (red), GPS fix light is on (green), KISS/Conn light is off (so I’m not in KISS mode, and it’s not connected to anyone), PTT light goes red when transmitting, otherwise off.

?

Yes, there is TX going out … using an IC-7700, TNC connected via the ACC socket in the back.? That connections works since I can successfully use the TNC in RPR mode to send out APRS signals (and I see myself on aprs.fi then).??

?

In HF packet mode, there’s no PTT or HF going out when I just issue a connect command though (ESC C callsign).? Anything I type after that is sent to the callsign I used in the connect command though.

Then RF is going out (right now about 80 Watts as I kept the TX audio pretty low) and I can hear the outgoing signal in monitor mode on the transceiver speaker ….

?

Somehow also when I try a disconnect command “ESC D” ?it says “invalid command: D” … which is weird??? Somehow seems like connect C and Disconnect commands aren’t working right?

?

Thanks again

Tom KI5BLU

?

From: [email protected] <[email protected]> On Behalf Of AB0DK Dave Krueger
Sent: Sunday, September 1, 2024 6:25 PM
To: [email protected]
Subject: Re: [network105] How to connect?

?

Tom,

What are your tnc lights indicating?

Any TX there? Is there audio going out to your data input to?the transmitter?

What transceiver are you using?
Re: How to connect?

 

开云体育

Hi Dave,

?

Thank you for the reply!

TNC lights – power light is on (red), GPS fix light is on (green), KISS/Conn light is off (so I’m not in KISS mode, and it’s not connected to anyone), PTT light goes red when transmitting, otherwise off.

?

Yes, there is TX going out … using an IC-7700, TNC connected via the ACC socket in the back.? That connections works since I can successfully use the TNC in RPR mode to send out APRS signals (and I see myself on aprs.fi then).??

?

In HF packet mode, there’s no PTT or HF going out when I just issue a connect command though (ESC C callsign).? Anything I type after that is sent to the callsign I used in the connect command though.

Then RF is going out (right now about 80 Watts as I kept the TX audio pretty low) and I can hear the outgoing signal in monitor mode on the transceiver speaker ….

?

Somehow also when I try a disconnect command “ESC D” ?it says “invalid command: D” … which is weird??? Somehow seems like connect C and Disconnect commands aren’t working right?

?

Thanks again

Tom KI5BLU

?

From: [email protected] <[email protected]> On Behalf Of AB0DK Dave Krueger
Sent: Sunday, September 1, 2024 6:25 PM
To: [email protected]
Subject: Re: [network105] How to connect?

?

Tom,

What are your tnc lights indicating?

Any TX there? Is there audio going out to your data input to?the transmitter?

What transceiver are you using?
Re: How to connect?

 

Tom,
What are your tnc lights indicating?
Any TX there? Is there audio going out to your data input to?the transmitter?
What transceiver are you using?
Re: How to connect?

KY4JW
 

开云体育

Putty is good, but try cool term. I use it for VHF and HF easy to set up. Have fun.

On Sep 1, 2024, at 6:42?PM, Tom KI5BLU via groups.io <frese01@...> wrote:

?
Hi - Tom KI5BLU here ... new to packet and just got my Teensy hardware TNC up and running ... just using the putty terminal program to connect to the TNC and set the parameters ... monitoring 14.105 I'm hearing a bunch of stations (see below) ... but how to I connect?
?
<ESC> C <CALL SIGN>?
?
is supposed to be the connect command ... but that by itself doesn't seem to trigger any transmission.? If I just hit <Enter> after that, it sends out
?
fm KI5BLU-7 to N0HI-7 ctl UI^ pid F0
?
(in this case I had typed
<ESC> C N0HI-7
and then hit a separate <CR> after that.
?
Any tips?
?
Thanks and 73
Tom KI5BLU
?
?
--------
some traffic I picked up on 14.105
?
fm AB0DK-7 to BEACON via N0HI-7 ctl UI^ pid F0
AB0DK-7 BPQ NODE EN30re. Dave Sysop. AB0DK-1 BBS

fm AB0DK-7 to BEACON via N0HI-7* ctl UI^ pid F0
AB0DK-7 BPQ NODE EN30re. Dave Sysop. AB0DK-1 BBS

fm KB9PVH-5 to DX via RFONLY ctl UI^ pid F0
DX de ?KB9PVH-5>30M ? ? ? VE3ZFM-4 ? ? ?74 dg frm ?KB9PVH-5 ?570mi ? ?2220z
* C AB0DK

fm K8ZTT to BEACON via N0HI-2* ctl UI pid F0
Welcome to station K8ZTT near Franktown, CO. DIGI through FNKTWN, KA-Node is K8ZTT-7, MBX is K8ZTT-1, C N0HI-7, C 3 K8ZTT-1

fm N0HI-7 to KC9VMO ctl I02+ pid F0
nds:
BYE BBS CHAT CONNECT INFO M

fm N0HI-7 to KC9VMO ctl RR0+

fm N0HI-7 to KC9VMO ctl I03+ pid F0
HEARD NODES PORTS RMS ROUTES USE

fm N0HI-7 to KC9VMO ctl RR0+

fm N0HI-7 to KC9VMO ctl RR0+

fm NN4NC to BEACON via KB9PVH-7 ctl UI pid F0
NN4NC 1/B, 7/N HF/VHF Clarkton, NC FM04 NC105
?
fm N0HI-7 to KC9VMO ctl RR0+

fm N0HI-7 to KC9VMO ctl I04+ pid F0
RS
How to connect?

 

Hi - Tom KI5BLU here ... new to packet and just got my Teensy hardware TNC up and running ... just using the putty terminal program to connect to the TNC and set the parameters ... monitoring 14.105 I'm hearing a bunch of stations (see below) ... but how to I connect?
?
<ESC> C <CALL SIGN>?
?
is supposed to be the connect command ... but that by itself doesn't seem to trigger any transmission.? If I just hit <Enter> after that, it sends out
?
fm KI5BLU-7 to N0HI-7 ctl UI^ pid F0
?
(in this case I had typed
<ESC> C N0HI-7
and then hit a separate <CR> after that.
?
Any tips?
?
Thanks and 73
Tom KI5BLU
?
?
--------
some traffic I picked up on 14.105
?
fm AB0DK-7 to BEACON via N0HI-7 ctl UI^ pid F0
AB0DK-7 BPQ NODE EN30re. Dave Sysop. AB0DK-1 BBS

fm AB0DK-7 to BEACON via N0HI-7* ctl UI^ pid F0
AB0DK-7 BPQ NODE EN30re. Dave Sysop. AB0DK-1 BBS

fm KB9PVH-5 to DX via RFONLY ctl UI^ pid F0
DX de ?KB9PVH-5>30M ? ? ? VE3ZFM-4 ? ? ?74 dg frm ?KB9PVH-5 ?570mi ? ?2220z
* C AB0DK

fm K8ZTT to BEACON via N0HI-2* ctl UI pid F0
Welcome to station K8ZTT near Franktown, CO. DIGI through FNKTWN, KA-Node is K8ZTT-7, MBX is K8ZTT-1, C N0HI-7, C 3 K8ZTT-1

fm N0HI-7 to KC9VMO ctl I02+ pid F0
nds:
BYE BBS CHAT CONNECT INFO M

fm N0HI-7 to KC9VMO ctl RR0+

fm N0HI-7 to KC9VMO ctl I03+ pid F0
HEARD NODES PORTS RMS ROUTES USE

fm N0HI-7 to KC9VMO ctl RR0+

fm N0HI-7 to KC9VMO ctl RR0+

fm NN4NC to BEACON via KB9PVH-7 ctl UI pid F0
NN4NC 1/B, 7/N HF/VHF Clarkton, NC FM04 NC105
?
fm N0HI-7 to KC9VMO ctl RR0+

fm N0HI-7 to KC9VMO ctl I04+ pid F0
RS
Easyterm's "Alert the Sysop"

 

Hi all,
?
Does anyone know how the "Alert the Sysop" function in UZ7HO's Easyterm works? ? It doesn't send an audio alert to the default system soundcard and it doesn't bring up a text alert.? Thanks, 73.
WMARC Guest Speaker 7/24 07:00 pm Eastern, 2300 UTC

 

FYI: As a member of the White Mountain Amateur Radio Club, I am excited to announce that this Wednesday's guest speaker is: Alan Zimmerman - KM4ND ? ? ? ?"Digital Modes” Although we are a packet group, you might this presentation interesting. ~ Chris ww2bsa Moderator
?
Digital Modes
An overview of digital modes. ?What does it take to get setup and started. I’ve learned an easier way to integrate n1mm with both fldigi and wsjtx to make it as seamless as ham radio deluxe.?
Bio:
Alan Zimmerman, KM4ND ? ? ? ? ? ?
My background is in a systems engineer by profession focusing on aerospace and defense mission critical systems and security. I’m an amateur extra, arrl technical specialist, local government liaison and official emergency station. I’m a VE with Laurel VEC, greater Los Angeles and ARRL and president of the Space Coast Amateur Radio Society.
Join Zoom Meeting

?
Wednesday July 24, 2024 at 7pm eastern
Meeting ID: 886 9812 0158
Passcode: 145450
Re: TNC to Radio cables

 

开云体育

https://hammadeparts.com/

Les is the owner.?
Been using him for years.
Never had a problem.

73 de Chris
ww2bsa?

-------- Original message --------
From: Alan Beck - VY2XU <abeck@...>
Date: 7/16/24 11:48 AM (GMT-05:00)
Subject: Re: [network105] TNC to Radio cables

Sean,

It's "Bluemax 49'ers"

73,
Alan
From: [email protected] <[email protected]> on behalf of Mark Acierno <acierno@...>
Sent: Tuesday, June 4, 2024 8:00 PM
To: [email protected] <[email protected]>
Subject: Re: [network105] TNC to Radio cables
?


Quality is 1st rate. I have purchased several cables and have been very pleased.?
Mark
N2UEM


On Jun 4, 2024, at 9:49?PM, Lee - WB4QOJ <wb4qoj@...> wrote:

If I remember correctly a while back someone posted that there is someone that makes cables to order for TNC to Radio. i.e. Kantronics, MFJ and so on.

? Who is that does anyone have the info and experience with the quality.

thanks Lee WB4QOJ?

Re: TNC to Radio cables

Alan Beck - VY2XU
 

开云体育

Sean,

It's "Bluemax 49'ers"

73,
Alan

From: [email protected] <[email protected]> on behalf of Mark Acierno <acierno@...>
Sent: Tuesday, June 4, 2024 8:00 PM
To: [email protected] <[email protected]>
Subject: Re: [network105] TNC to Radio cables
?


Quality is 1st rate. I have purchased several cables and have been very pleased.?
Mark
N2UEM


On Jun 4, 2024, at 9:49?PM, Lee - WB4QOJ <wb4qoj@...> wrote:

If I remember correctly a while back someone posted that there is someone that makes cables to order for TNC to Radio. i.e. Kantronics, MFJ and so on.

? Who is that does anyone have the info and experience with the quality.

thanks Lee WB4QOJ?

Re: TNC to Radio cables

 

开云体育

Hello

?

I have not forgotten – I have created the 2nd station to be used for remote access to Packet and other digital modes, that will be private to be people I know personally.

?

I will zap back to the list to get this show on the road – all your help is been the best for me!!

?

Sean

VE1XOP

?

From: [email protected] <[email protected]> On Behalf Of Chris Lance WW2BSA
Sent: Wednesday, June 05, 2024 12:32 AM
To: [email protected]
Subject: Re: [network105] TNC to Radio cables

?

Hi Lee,

That was me. Les, WY0GTR owns Ham Made Parts. Has been making me TNC cables for years with no problems.

?

?

?

73 de Chris ww2bsa

?

?

-------- Original message --------

From: Lee - WB4QOJ <wb4qoj@...>

Date: 6/4/24 10:49 PM (GMT-05:00)

To: [email protected]

Subject: [network105] TNC to Radio cables

?

If I remember correctly a while back someone posted that there is someone that makes cables to order for TNC to Radio. i.e. Kantronics, MFJ and so on.

? Who is that does anyone have the info and experience with the quality.

thanks Lee WB4QOJ?

Re: Net 30 (or 30M Packet)

 

Hi Chris,
Firstly, I'm surprised to find this topic here in this group.
Secondly, I should have provided the link to APRSThursday - here it is...

The "net" is a check-in that is held every Thursday from 0000Z to 2359Z. There's usually about 400 of us that check in from around the world.

I've played around with WinRPR too but found that PinPoint works great with UZ7HO's SoundModem.



--
Leo Guidolin, VE3ZLG

Re: Net 30 (or 30M Packet)

 

Yes 10.147.30 USB is used for RP APRS, and above that a little is HFP aprs as mentioned in last email.

We used to hang out from time to time around 10.144 LSB for general use ie, keybd/BBS.

73/warren
wb7ecu

Sent with secure email.

Re: Net 30 (or 30M Packet)

 

开云体育

Leo,
I'm more familiar with VHF APRS, so forgive me. Never done HF APRS.

I just got a Teensy for RPR. Is this the mode for Thursday night or a different setup?

Also, what time? (UTC)
Tnx es 73 de Chris ww2bsa

-------- Original message --------
From: Leo Guidolin - VE3ZLG <guidolinleo@...>
Date: 7/14/24 7:56 AM (GMT-05:00)
Subject: Re: [network105] Net 30 (or 30M Packet)

I use 10.147.6 dial frequency USB, centred on 1700 Hz, on Thursdays to check into the APRSThursday net using PinPoint and Soundmodem. You can also use this configuration for sending an APRS position beacon.

--
Leo Guidolin, VE3ZLG

Re: Net 30 (or 30M Packet)

 

I use 10.147.6 dial frequency USB, centred on 1700 Hz, on Thursdays to check into the APRSThursday net using PinPoint and Soundmodem. You can also use this configuration for sending an APRS position beacon.

--
Leo Guidolin, VE3ZLG

Re: Net 30 (or 30M Packet)

 

Hi Kevin. If I recall, 10.1473 USB is the Robust Packet Network. So, what is the club call? I'll try to monitor/connect.
73 de Chris ww2bsa

Re: Net 30 (or 30M Packet)

 

I haven't actively monitored on 30m in a hot minute, but I know my club maintains an igate on 10.1473 USB.

Re: TNC to Radio cables

 

thanks to all that responded. Great info.

73 Lee


On Wed, Jun 5, 2024, 7:24?AM Jim - KI0BK via <jccordill=[email protected]> wrote:
Associated Radio has cables for kantronics tnc’s and others, many are listed on eBay.

Jim KI0BK





Re: TNC to Radio cables

 

Associated Radio has cables for kantronics tnc’s and others, many are listed on eBay.

Jim KI0BK

Re: TNC to Radio cables

 

开云体育

Hi Lee,
That was me. Les, WY0GTR owns Ham Made Parts. Has been making me TNC cables for years with no problems.


https://hammadeparts.com/

73 de Chris ww2bsa


-------- Original message --------
From: Lee - WB4QOJ <wb4qoj@...>
Date: 6/4/24 10:49 PM (GMT-05:00)
Subject: [network105] TNC to Radio cables

If I remember correctly a while back someone posted that there is someone that makes cables to order for TNC to Radio. i.e. Kantronics, MFJ and so on.

? Who is that does anyone have the info and experience with the quality.

thanks Lee WB4QOJ?

Re: TNC to Radio cables

 

开云体育



Quality is 1st rate. I have purchased several cables and have been very pleased.?
Mark
N2UEM


On Jun 4, 2024, at 9:49?PM, Lee - WB4QOJ <wb4qoj@...> wrote:

If I remember correctly a while back someone posted that there is someone that makes cables to order for TNC to Radio. i.e. Kantronics, MFJ and so on.

? Who is that does anyone have the info and experience with the quality.

thanks Lee WB4QOJ?

161 - 180 of 2167