开云体育

Manfred, thanks very much for your reply defining "end-to-end" and the reasoning for 170VRMS. After I'd read it I still didn't understand why the voltage across the CMC end-to-end was half the

Hey Fred, Amazon has them, several sources, under "SMA Attenuators" $9-$13 depending on source Regards, Ted (KD7AQO)--------------------------------------- From: "Fred Moore" To:

Jim where is this product listed?

These changes are for NEW groups only. Don't panic; existing groups continue to benefit from the past arrangements. -- Dave Rypma Belwood, ON Livingston, TX dave.rypma@... VE3HTC / VE3DTR

Yes, Mr. Ohm said it all: both voltage and current are required. A cloud can accumulate a voltage but nothing happens until the breakdown potential is reached. Then and only then does current flow

Do you have a PayPal account? Brent, AB1LF -- Brent DeWitt, AB1LF Milford, MA

Fantastic job. Thank you for the information. Clyde Lambert KC7BJE wrote:

Thank you,Glen N9FBG

All, The change from Basic to Premium has been made and confirmed. At this point all costs have been covered by the co-owners. As I stated in my previous Special Notice, when we figure out how to ask

I should add this applies to DisLord's 1.0.45 firmware.

I took the 5-stack 31 material apart (the third entry in the table) and wound a 2-stack 31 material using solid AWG #`12 enameled copper wire. The result is much less loss. Maybe I should have wound

It is, under the calibrate menu, The available options are Auto, 2, 4, 6 or 8mA, yes mA. HTH Liam

?Find a place to install a Paypal button and you will find you earn 10 times the money you need.

I just happened to have one of these delivered today. On my H4 they're all within 1dB of spec which is close enough for what it is. The SMA's are only soldered on the top side of the board but that's

All, *PLEASE READ COMPLETELY AND THOROUGHLY.* It has come to the attention of the co-owners of this group that there will be some pricing changes coming to groups.io on February 2nd, 2021. The main

Is that function also available on the

OK... I have the standard H model running Hugen's NanoVNA-H_AA_20200118.dfu firmware.

That makes it muy facil - 10dB 100 ohm shunt, 33+39 ohm series, 100 ohm shunt 20dB 100 ohm shunt 68 ohms series, 51 ohms shunt, 75 ohms series, 100 ohms? shunt 30dB 56 ohm shunt, 270 ohm series,

A practical example that some may find interesting: https://youtu.be/owIoUiKLApg?t=405

Yo tengo una de esas te mando una foto para que veas los resistores. Saludos.