¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Nanovna-Users
  2. Messages
Expanded Topics Messages
Date
Re: Trying to find an "original" nanoVNA that will work with Joe Smith's software ...

 

PDN means "power distribution networks", an odd term that had appeared for those low-Z nets of filtering MLCC caps in power rails, etc. ))
All this nets are characterized by very low Z at low frequency band starting from DC to a couple of MHz.

Regarding "original NanoVNA", I just have purchased one of the cheap clones from AliExpress, that are still available.
Then just flashed it with the recommended FW version from Joe's git repo.
--
Alex
Re: Trying to find an "original" nanoVNA that will work with Joe Smith's software ...

 

You may try Walmart online, they have one that is close to the original for
$20+ bucks.

On Fri, Feb 25, 2022 at 9:11 AM <moensted1@...> wrote:

Hi nanoVNA users,

This is my first post here so I hope I am posting in the right topic
subgroup .. ?

My reason for posting is that I am interested in buying and getting to
know how to use a nanoVNA for PDN measurements (DACs and ADCs) and passive
component characterization. To this end I have watched this video by Joe
Smith:




and it looks very much as if his software may do exactly what I need a
software to do. However, in the intro to the video at appr. 2:15 mins he
compares the capabilities of various nanoVNAs and apparently it is
specifically the "original VNA" - shown at 2:15 mins - that has both a low
lower cut-off frequency (10 kHz), a wide dynamic range, and works in a way
that is fully compatible with his software.

Having searched e.g. ebay for an "original" nanoVNA I get like hundreds of
"hits" and I don't really know what to go for ... ??

Might one of you here know which nanoVNA Joe Smith uses and where it can
be bought (if possible it would be preferable within the EU)? Help would be
much appreciated :-)

Cheers & thanks for considering,

Jesper M





--
Clear Skies and
Keep Looking up
David Stansberry
Re: Trying to find an "original" nanoVNA that will work with Joe Smith's software ...

 

On 2/25/22 6:08 AM, moensted1@... wrote:
Hi nanoVNA users,

This is my first post here so I hope I am posting in the right topic subgroup .. ?

My reason for posting is that I am interested in buying and getting to know how to use a nanoVNA for PDN measurements (DACs and ADCs)

PDN measurements? What does PDN stand for?
and passive component characterization. To this end I have watched this video by Joe Smith:



and it looks very much as if his software may do exactly what I need a software to do. However, in the intro to the video at appr. 2:15 mins he compares the capabilities of various nanoVNAs and apparently it is specifically the "original VNA" - shown at 2:15 mins - that has both a low lower cut-off frequency (10 kHz), a wide dynamic range, and works in a way that is fully compatible with his software.
I'd be careful about performance down low (10kHz) - While the VNA may generate the frequencies, there is AC coupling at various places in the analog chain, and, of course, the "detection" frequency is 5kHz (that is, the receivers use an LO that is 5kHz away) so I'd be careful about mixer performance where the RF, IF, and LO are all close together. Sure, the SA612 probably works down to DC, but...

Also, bear in mind that the stimulus on the NanoVNAs is a square-ish wave, not a nice clean sine wave with low distortion and spurs.
Trying to find an "original" nanoVNA that will work with Joe Smith's software ...

 

Hi nanoVNA users,

This is my first post here so I hope I am posting in the right topic subgroup .. ?

My reason for posting is that I am interested in buying and getting to know how to use a nanoVNA for PDN measurements (DACs and ADCs) and passive component characterization. To this end I have watched this video by Joe Smith:



and it looks very much as if his software may do exactly what I need a software to do. However, in the intro to the video at appr. 2:15 mins he compares the capabilities of various nanoVNAs and apparently it is specifically the "original VNA" - shown at 2:15 mins - that has both a low lower cut-off frequency (10 kHz), a wide dynamic range, and works in a way that is fully compatible with his software.

Having searched e.g. ebay for an "original" nanoVNA I get like hundreds of "hits" and I don't really know what to go for ... ??

Might one of you here know which nanoVNA Joe Smith uses and where it can be bought (if possible it would be preferable within the EU)? Help would be much appreciated :-)

Cheers & thanks for considering,

Jesper M
Re: Unknown Thru Calibration Algorithm #calibration

 

discussion about VNA calibration error models:
/g/nanovna-users/topic/34237712

This paper seems directly related to the Unknown Through Calibration error model, as I understand:


--
Alex
Re: Unknown Thru Calibration Algorithm #calibration

 

Hi,
some related papers from net search,


There had been a discussion thread in this group with recent ly added related paper, too
--
Alex
Re: Unknown Thru Calibration Algorithm #calibration

 

It's not mine but I do share the sentiment ;)

On Fri, 25 Feb 2022 at 02:45, Mike C. <mg@...> wrote:

I've been retired for 18 years and even I DON'T have that much time,
wow, I hope you have a day job. Very nice work though.

Mike C.

On 2/24/2022 6:35 PM, Dragan Milivojevic wrote:
Maybe of help:
(source code on github).

On Thu, 24 Feb 2022 at 23:38, James F 2E0KVS <fletchersjames@...>
wrote:

Hi all,

I am currently working on implementing various VNA calibration
algorithms
in MATLAB. I have succesfully implemented SOLT and one-port algorithms,
but
I am having trouble getting my head around the unknown thru/8 term
2-port
calibration model. I've been basing my work off the following document
by
Doug Rytting

, which has been very useful. I'm currently trying to use page 23+24 of
this document to build my unknown thru calibration algorithm, but I'm
uncertain how I can produce the error terms needed for the constant k.

I would greatly appreciate any help, or links that may prove useful.

James G8YYH/2E0KVS
Re: Unknown Thru Calibration Algorithm #calibration

 

I've been retired for 18 years and even I DON'T have that much time, wow, I hope you have a day job. Very nice work though.

Mike C.

On 2/24/2022 6:35 PM, Dragan Milivojevic wrote:
Maybe of help:
(source code on github).

On Thu, 24 Feb 2022 at 23:38, James F 2E0KVS <fletchersjames@...>
wrote:

Hi all,

I am currently working on implementing various VNA calibration algorithms
in MATLAB. I have succesfully implemented SOLT and one-port algorithms, but
I am having trouble getting my head around the unknown thru/8 term 2-port
calibration model. I've been basing my work off the following document by
Doug Rytting

, which has been very useful. I'm currently trying to use page 23+24 of
this document to build my unknown thru calibration algorithm, but I'm
uncertain how I can produce the error terms needed for the constant k.

I would greatly appreciate any help, or links that may prove useful.

James G8YYH/2E0KVS
Re: Unknown Thru Calibration Algorithm #calibration

 

Maybe of help:
(source code on github).

On Thu, 24 Feb 2022 at 23:38, James F 2E0KVS <fletchersjames@...>
wrote:

Hi all,

I am currently working on implementing various VNA calibration algorithms
in MATLAB. I have succesfully implemented SOLT and one-port algorithms, but
I am having trouble getting my head around the unknown thru/8 term 2-port
calibration model. I've been basing my work off the following document by
Doug Rytting

, which has been very useful. I'm currently trying to use page 23+24 of
this document to build my unknown thru calibration algorithm, but I'm
uncertain how I can produce the error terms needed for the constant k.

I would greatly appreciate any help, or links that may prove useful.

James G8YYH/2E0KVS
Unknown Thru Calibration Algorithm #calibration

 

Hi all,

I am currently working on implementing various VNA calibration algorithms in MATLAB. I have succesfully implemented SOLT and one-port algorithms, but I am having trouble getting my head around the unknown thru/8 term 2-port calibration model. I've been basing my work off the following document by Doug Rytting , which has been very useful. I'm currently trying to use page 23+24 of this document to build my unknown thru calibration algorithm, but I'm uncertain how I can produce the error terms needed for the constant k.

I would greatly appreciate any help, or links that may prove useful.

James G8YYH/2E0KVS
Re: Proper way to measure length of _Window_Line_?

 

You needed to sweep up to a higher frequency to see your impedance null.

A method to calculate the VF of any feedline, that will work with a VNA, antenna analyze or SWR bridge.
(this sounds complicated, but only takes a minute to do if you have already measured the actual feedline length):

Leave one end of the feed line open (or shorted -not terminated with the characteristic impedance).
Sweep over a wide frequency range, starting with a bit lower than MHz=150/(feedline length in meters),
and stopping after 2 (preferably 4) multiples of the starting frequency.

Carefully note the frequencies where you get a peak and a null.
You need to sweep a wide enough frequency range to to get at least two peaks or two nulls.
It will be apparent from the frequencies recorded, which is the fundamental, 2nd harmonic, etc.
Calculate the free-space length (meters) using 299.8/(2 x frequency x harmonic).
Your actual length / (calculated free-space length) is the exact velocity factor.

VF can vary 1 percent between batches of the same type coax, less so for parallel line.
I used this technique to get the exact VF of a 500 foot length of LMR400,
and knowing this was later able to locate a center conductor break with 1/8 inch accuracy.
--
N0YWB
Re: NanoSaver on ubuntu- mint

 

It is!!!


Em 22/02/2022 19:26, Francesco escreveu:

The bus 005 is the NanoVNA "I belive?
The Bus 005 Device 023: ID 04b4:0008 Cypress Semiconductor Corp. CDC-ACM Demo Bus 0
reale@reale-XPS-M1330:~$? lsusb
Bus 002 Device 003: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 0483:2016 STMicroelectronics Fingerprint Reader
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 023: ID 04b4:0008 Cypress Semiconductor Corp. CDC-ACM Demo
Bus 005 Device 004: ID 1c4f:0034 SiGma Micro Usb Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

*Sent:* Tuesday, February 22, 2022 at 8:24 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
Try to access the device using the serial terminal.
Plug the device, find the serial port (type dmesg in the terminal, you will
see a message at the end of the output)
and use that in a serial terminal software (cutecom for example) and see if
it works.

On Sun, 20 Feb 2022 at 20:52, Francesco <realfran@...> wrote:

No, if I plug the USB cable from the NanoVNA to the PC and push the icon
to open the NanoSaver software, NOT open up.
If I unplug the USB cable the NanoSaver open up, I select SCAN Refresh and
NOT see the NanoVNA serial port.
*Sent:* Sunday, February 20, 2022 at 6:16 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
I'm sorry, I do not understand what you are trying to say.
You expect for NanoVNASaver to start on its own when you
plug in the NanoVNA?

On Sun, 20 Feb 2022 at 11:37, Francesco <realfran@...> wrote:

Yes, I install libreVNA with is on software and work, I cheek on
Mint/Ubuntu and give me the list of usb ports, I plug the NanoVNA and
give
me the Cypress USB driver is installed, *I give more detall* : when I
plug
the USB cable from the NanoVNA the Saver software not open, when I unplug
the cable open up, the problem is NanoSaver software don't open the USB
port.
I tray to put this information on the terminal but not result.
One other information I never use software terminal on my life.
Thank you for the help the only think I doing is "copy and past on the
terminal".
Best regards.
Francesco.
*Sent:* Sunday, February 20, 2022 at 3:39 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
AFAIK Saver does not support LibreVNA

On Sat, 19 Feb 2022 at 10:24, Francesco <realfran@...> wrote:

Hello, I install LibreVNA and work, I use the USB port for different
device and work, the only problem is NanoVNA-Saver is installed but not
find the the serial/usb device.
*Sent:* Saturday, February 19, 2022 at 4:36 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint


On Sat, 19 Feb 2022 at 01:22, Francesco <realfran@...> wrote:

Hello, I set up one laptop with Mint Linux "cinnamon" I install
NanoVNA
Saver I don't find the "device port" get a problem with the LiteVNA
and
the
NanoVNA V2 plus4.
Please some help, I'm computer illiterate and this is the first time
I
use
Linux (I'm lost) I install a lot of Python libraries and I get
confused
with the " CONSOLE "
Re: NanoSaver on ubuntu- mint

 

/dev/ttyACM0 is the serial device
dmesg | tail if you want to avoid printing the whole output.

On Tue, 22 Feb 2022 at 23:36, Francesco <realfran@...> wrote:

This is CHINO I'm computer illiterate

reale@reale-XPS-M1330:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x60f, date
= 2010-09-29
[ 0.000000] Linux version 5.4.0-100-generic (buildd@lcy02-amd64-002)
(gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #113-Ubuntu SMP Thu Feb
3 18:43:29 UTC 2022 (Ubuntu 5.4.0-100.113-generic 5.4.166)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-100-generic
root=UUID=2b218828-e859-4614-9c1e-cb331d307847 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df66d7ff]
usable
[ 0.000000] BIOS-e820: [mem 0x00000000df66d800-0x00000000dfffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff]
usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Dell Inc. XPS M1330 /0N6705,
BIOS A15 12/26/2008
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.058 MHz processor
[ 0.003774] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003776] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.003781] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.003788] MTRR default type: uncachable
[ 0.003789] MTRR fixed ranges enabled:
[ 0.003790] 00000-9FFFF write-back
[ 0.003791] A0000-BFFFF uncachable
[ 0.003792] C0000-CFFFF write-protect
[ 0.003793] D0000-EFFFF uncachable
[ 0.003794] F0000-FFFFF write-protect
[ 0.003795] MTRR variable ranges enabled:
[ 0.003797] 0 base 000000000 mask F80000000 write-back
[ 0.003798] 1 base 080000000 mask FC0000000 write-back
[ 0.003799] 2 base 0C0000000 mask FE0000000 write-back
[ 0.003801] 3 base 100000000 mask FE0000000 write-back
[ 0.003802] 4 base 0DF800000 mask FFF800000 uncachable
[ 0.003803] 5 base 0DF700000 mask FFFF00000 uncachable
[ 0.003804] 6 disabled
[ 0.003804] 7 disabled
[ 0.004776] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004895] total RAM covered: 4087M
[ 0.005238] Found optimal setting for mtrr clean up
[ 0.005239] gran_size: 64K chunk_size: 1G num_reg: 5 lose
cover RAM: 0G
[ 0.006146] e820: update [mem 0xdf700000-0xffffffff] usable ==> reserved
[ 0.006152] last_pfn = 0xdf66d max_arch_pfn = 0x400000000
[ 0.038520] check: Scanning 1 areas for low memory corruption
[ 0.038985] RAMDISK: [mem 0x2d5a7000-0x32acafff]
[ 0.038993] ACPI: Early table checksum verification disabled
[ 0.038999] ACPI: RSDP 0x00000000000FBC00 000024 (v02 DELL )
[ 0.039003] ACPI: XSDT 0x00000000DF66F200 00005C (v01 DELL M08
27D80C1A ASL 00000061)
[ 0.039010] ACPI: FACP 0x00000000DF66F09C 0000F4 (v04 DELL M08
27D80C1A ASL 00000061)
[ 0.039017] ACPI: DSDT 0x00000000DF66F800 005733 (v02 INT430 SYSFexxx
00001001 INTL 20050624)
[ 0.039022] ACPI: FACS 0x00000000DF67E000 000040
[ 0.039025] ACPI: FACS 0x00000000DF67E000 000040
[ 0.039028] ACPI: HPET 0x00000000DF66F300 000038 (v01 DELL M08
00000001 ASL 00000061)
[ 0.039032] ACPI: APIC 0x00000000DF66F400 000068 (v01 DELL M08
27D80C1A ASL 00000047)
[ 0.039036] ACPI: MCFG 0x00000000DF66F3C0 00003E (v16 DELL M08
27D80C1A ASL 00000061)
[ 0.039040] ACPI: SLIC 0x00000000DF66F49C 000176 (v01 DELL M08
27D80C1A ASL 00000061)
[ 0.039044] ACPI: BOOT 0x00000000DF66EFC0 000028 (v01 DELL M08
27D80C1A ASL 00000061)
[ 0.039048] ACPI: SSDT 0x00000000DF66D97A 0004CC (v01 PmRef CpuPm
00003000 INTL 20050624)
[ 0.039052] ACPI: Reserving FACP table memory at [mem
0xdf66f09c-0xdf66f18f]
[ 0.039053] ACPI: Reserving DSDT table memory at [mem
0xdf66f800-0xdf674f32]
[ 0.039054] ACPI: Reserving FACS table memory at [mem
0xdf67e000-0xdf67e03f]
[ 0.039055] ACPI: Reserving FACS table memory at [mem
0xdf67e000-0xdf67e03f]
[ 0.039056] ACPI: Reserving HPET table memory at [mem
0xdf66f300-0xdf66f337]
[ 0.039057] ACPI: Reserving APIC table memory at [mem
0xdf66f400-0xdf66f467]
[ 0.039058] ACPI: Reserving MCFG table memory at [mem
0xdf66f3c0-0xdf66f3fd]
[ 0.039059] ACPI: Reserving SLIC table memory at [mem
0xdf66f49c-0xdf66f611]
[ 0.039060] ACPI: Reserving BOOT table memory at [mem
0xdf66efc0-0xdf66efe7]
[ 0.039061] ACPI: Reserving SSDT table memory at [mem
0xdf66d97a-0xdf66de45]
[ 0.039076] ACPI: Local APIC address 0xfee00000
[ 0.039191] No NUMA configuration found
[ 0.039192] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.039205] NODE_DATA(0) allocated [mem 0x11ffd1000-0x11fffbfff]
[ 0.039518] Zone ranges:
[ 0.039519] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.039521] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.039522] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.039523] Device empty
[ 0.039524] Movable zone start for each node
[ 0.039528] Early memory node ranges
[ 0.039529] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.039530] node 0: [mem 0x0000000000100000-0x00000000df66cfff]
[ 0.039531] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.039580] Zeroed struct page in unavailable ranges: 2549 pages
[ 0.039581] Initmem setup node 0 [mem
0x0000000000001000-0x000000011fffffff]
[ 0.039583] On node 0 totalpages: 1046027
[ 0.039584] DMA zone: 64 pages used for memmap
[ 0.039585] DMA zone: 21 pages reserved
[ 0.039586] DMA zone: 3998 pages, LIFO batch:0
[ 0.039667] DMA32 zone: 14234 pages used for memmap
[ 0.039668] DMA32 zone: 910957 pages, LIFO batch:63
[ 0.072407] Normal zone: 2048 pages used for memmap
[ 0.072409] Normal zone: 131072 pages, LIFO batch:31
[ 0.077106] Reserving Intel graphics memory at [mem
0xdf800000-0xdfffffff]
[ 0.077589] ACPI: PM-Timer IO Port: 0x1008
[ 0.077592] ACPI: Local APIC address 0xfee00000
[ 0.077606] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.077607] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.077623] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.077626] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.077628] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.077630] ACPI: IRQ0 used by override.
[ 0.077631] ACPI: IRQ9 used by override.
[ 0.077634] Using ACPI (MADT) for SMP configuration information
[ 0.077636] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.077645] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.077667] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.077669] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.077669] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.077671] PM: Registered nosave memory: [mem 0xdf66d000-0xdf66dfff]
[ 0.077672] PM: Registered nosave memory: [mem 0xdf66e000-0xdfffffff]
[ 0.077673] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.077673] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.077674] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.077675] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.077676] PM: Registered nosave memory: [mem 0xfec10000-0xfed17fff]
[ 0.077676] PM: Registered nosave memory: [mem 0xfed18000-0xfed1bfff]
[ 0.077677] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.077678] PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff]
[ 0.077679] PM: Registered nosave memory: [mem 0xfed90000-0xfed9ffff]
[ 0.077679] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda5fff]
[ 0.077680] PM: Registered nosave memory: [mem 0xfeda6000-0xfedfffff]
[ 0.077681] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[ 0.077682] PM: Registered nosave memory: [mem 0xfee10000-0xffdfffff]
[ 0.077682] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.077685] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.077686] Booting paravirtualized kernel on bare hardware
[ 0.077692] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.077700] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.078923] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u1048576
[ 0.078931] pcpu-alloc: s208896 r8192 d28672 u1048576 alloc=1*2097152
[ 0.078932] pcpu-alloc: [0] 0 1
[ 0.078976] Built 1 zonelists, mobility grouping on. Total pages:
1029660
[ 0.078977] Policy zone: Normal
[ 0.078980] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-5.4.0-100-generic
root=UUID=2b218828-e859-4614-9c1e-cb331d307847 ro quiet splash
[ 0.081140] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes, linear)
[ 0.082242] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes, linear)
[ 0.082305] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.115231] Calgary: detecting Calgary via BIOS EBDA area
[ 0.115233] Calgary: Unable to locate Rio Grande table in EBDA -
bailing!
[ 0.156467] Memory: 3921604K/4184108K available (14339K kernel code,
2400K rwdata, 9500K rodata, 2752K init, 4948K bss, 262504K reserved, 0K
cma-reserved)
[ 0.156480] random: get_random_u64 called from
kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.156720] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.156749] Kernel/User page tables isolation: enabled
[ 0.156780] ftrace: allocating 44649 entries in 175 pages
[ 0.180256] rcu: Hierarchical RCU implementation.
[ 0.180258] rcu: RCU restricting CPUs from NR_CPUS=8192 to
nr_cpu_ids=2.
[ 0.180260] Tasks RCU enabled.
[ 0.180261] rcu: RCU calculated value of scheduler-enlistment delay is
25 jiffies.
[ 0.180262] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.184136] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.184418] Console: colour dummy device 80x25
[ 0.184424] printk: console [tty0] enabled
[ 0.184449] ACPI: Core revision 20190816
[ 0.184545] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484882848 ns
[ 0.184562] APIC: Switch to symmetric I/O mode setup
[ 0.185023] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.204562] clocksource: tsc-early: mask: 0xffffffffffffffff
max_cycles: 0x22824a3a029, max_idle_ns: 440795236508 ns
[ 0.204567] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4788.11 BogoMIPS (lpj=9576232)
[ 0.204569] pid_max: default: 32768 minimum: 301
[ 0.204611] LSM: Security Framework initializing
[ 0.204626] Yama: becoming mindful.
[ 0.204663] AppArmor: AppArmor initialized
[ 0.204726] Mount-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.204751] Mountpoint-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.204776] *** VALIDATE tmpfs ***
[ 0.204987] *** VALIDATE proc ***
[ 0.205063] *** VALIDATE cgroup1 ***
[ 0.205064] *** VALIDATE cgroup2 ***
[ 0.205127] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.205131] process: using mwait in idle threads
[ 0.205135] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.205136] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.205140] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.205141] Spectre V2 : Mitigation: Full generic retpoline
[ 0.205142] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
RSB on context switch
[ 0.205143] Speculative Store Bypass: Vulnerable
[ 0.205147] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.205322] Freeing SMP alternatives memory: 40K
[ 0.317682] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @
2.40GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.317862] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR,
Intel PMU driver.
[ 0.317870] ... version: 2
[ 0.317871] ... bit width: 40
[ 0.317872] ... generic registers: 2
[ 0.317873] ... value mask: 000000ffffffffff
[ 0.317874] ... max period: 000000007fffffff
[ 0.317874] ... fixed-purpose events: 3
[ 0.317875] ... event mask: 0000000700000003
[ 0.317932] rcu: Hierarchical SRCU implementation.
[ 0.319017] NMI watchdog: Enabled. Permanently consumes one hw-PMU
counter.
[ 0.319080] smp: Bringing up secondary CPUs ...
[ 0.319290] x86: Booting SMP configuration:
[ 0.319291] .... node #0, CPUs: #1
[ 0.322616] smp: Brought up 1 node, 2 CPUs
[ 0.322616] smpboot: Max logical packages: 1
[ 0.322616] smpboot: Total of 2 processors activated (9576.23 BogoMIPS)
[ 0.325022] devtmpfs: initialized
[ 0.325022] x86/mm: Memory block size: 128MB
[ 0.325330] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.325330] futex hash table entries: 512 (order: 3, 32768 bytes,
linear)
[ 0.325330] pinctrl core: initialized pinctrl subsystem
[ 0.325330] PM: RTC time: 21:18:35, date: 2022-02-22
[ 0.325330] NET: Registered protocol family 16
[ 0.325330] audit: initializing netlink subsys (disabled)
[ 0.325330] audit: type=2000 audit(1645564715.140:1): state=initialized
audit_enabled=0 res=1
[ 0.325330] EISA bus registered
[ 0.325330] cpuidle: using governor ladder
[ 0.325330] cpuidle: using governor menu
[ 0.325330] Simple Boot Flag at 0x79 set to 0x80
[ 0.325330] ACPI: bus type PCI registered
[ 0.325330] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.325330] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.325330] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
E820
[ 0.325330] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000]
with a huge-page mapping due to MTRR override.
[ 0.325330] PCI: Using configuration type 1 for base access
[ 0.330624] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.330624] ACPI: Added _OSI(Module Device)
[ 0.330624] ACPI: Added _OSI(Processor Device)
[ 0.330624] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.330624] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.332568] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.332569] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.332571] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.338659] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.353932] ACPI: Dynamic OEM Table Load:
[ 0.353938] ACPI: SSDT 0xFFFF8C29DB396C00 000043 (v01 LMPWR DELLLOM
00001001 INTL 20050624)
[ 0.354739] ACPI: Dynamic OEM Table Load:
[ 0.354744] ACPI: SSDT 0xFFFF8C29DA8E5400 0002C8 (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
[ 0.355496] ACPI: Dynamic OEM Table Load:
[ 0.355501] ACPI: SSDT 0xFFFF8C29DB355000 0005E5 (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
[ 0.356460] ACPI: Dynamic OEM Table Load:
[ 0.356465] ACPI: SSDT 0xFFFF8C29DB397700 0000C4 (v01 PmRef Cpu1Ist
00003000 INTL 20050624)
[ 0.356982] ACPI: Dynamic OEM Table Load:
[ 0.356986] ACPI: SSDT 0xFFFF8C29DA911A80 000085 (v01 PmRef Cpu1Cst
00003000 INTL 20050624)
[ 0.357793] ACPI: Interpreter enabled
[ 0.357816] ACPI: (supports S0 S3 S4 S5)
[ 0.357817] ACPI: Using IOAPIC for interrupt routing
[ 0.357849] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.358129] ACPI: Enabled 13 GPEs in block 00 to 1F
[ 0.443210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.443219] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[ 0.443235] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000
[bus 00-3f] only partially covers this bridge
[ 0.457201] PCI host bridge to bus 0000:00
[ 0.457204] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7
window]
[ 0.457205] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff
window]
[ 0.457207] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.457209] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000dffff window]
[ 0.457210] pci_bus 0000:00: root bus resource [mem
0xe0000000-0xf7ffffff window]
[ 0.457216] pci_bus 0000:00: root bus resource [mem
0xfc000000-0xfebfffff window]
[ 0.457218] pci_bus 0000:00: root bus resource [mem
0xfec10000-0xfecfffff window]
[ 0.457219] pci_bus 0000:00: root bus resource [mem
0xfed1c000-0xfed1ffff window]
[ 0.457221] pci_bus 0000:00: root bus resource [mem
0xfed90000-0xfed9ffff window]
[ 0.457222] pci_bus 0000:00: root bus resource [mem
0xfeda7000-0xfedfffff window]
[ 0.457224] pci_bus 0000:00: root bus resource [mem
0xfee10000-0xff9fffff window]
[ 0.457226] pci_bus 0000:00: root bus resource [mem
0xffc00000-0xffdfffff window]
[ 0.457227] pci_bus 0000:00: root bus resource [mem
0x120000000-0x317ffffff window]
[ 0.457229] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.457243] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.457392] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.457407] pci 0000:00:02.0: reg 0x10: [mem 0xf6e00000-0xf6efffff
64bit]
[ 0.457414] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.457419] pci 0000:00:02.0: reg 0x20: [io 0xeff8-0xefff]
[ 0.457580] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.457593] pci 0000:00:02.1: reg 0x10: [mem 0xf6f00000-0xf6ffffff
64bit]
[ 0.457791] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.457853] pci 0000:00:1a.0: reg 0x20: [io 0x6f20-0x6f3f]
[ 0.458013] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.458074] pci 0000:00:1a.1: reg 0x20: [io 0x6f00-0x6f1f]
[ 0.458247] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.458274] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[ 0.458379] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.458525] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.458558] pci 0000:00:1b.0: reg 0x10: [mem 0xf6dfc000-0xf6dfffff
64bit]
[ 0.458678] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.458834] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.458973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.459138] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.459276] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.459441] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.459579] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.459793] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.459931] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.460097] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.460159] pci 0000:00:1d.0: reg 0x20: [io 0x6f80-0x6f9f]
[ 0.460318] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.460380] pci 0000:00:1d.1: reg 0x20: [io 0x6f60-0x6f7f]
[ 0.460541] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.460606] pci 0000:00:1d.2: reg 0x20: [io 0x6f40-0x6f5f]
[ 0.460778] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.460805] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[ 0.460909] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.461054] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.461281] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.461403] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by
ICH6 ACPI/GPIO/TCO
[ 0.461408] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by
ICH6 GPIO
[ 0.461412] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900
(mask 007f)
[ 0.461418] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80
(mask 003f)
[ 0.461582] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.461605] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.461617] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.461628] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.461640] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.461651] pci 0000:00:1f.1: reg 0x20: [io 0x6fa0-0x6faf]
[ 0.461676] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io
0x01f0-0x01f7]
[ 0.461678] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.461679] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io
0x0170-0x0177]
[ 0.461681] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.461831] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.461859] pci 0000:00:1f.2: reg 0x10: [io 0x6eb0-0x6eb7]
[ 0.461871] pci 0000:00:1f.2: reg 0x14: [io 0x6eb8-0x6ebb]
[ 0.461883] pci 0000:00:1f.2: reg 0x18: [io 0x6ec0-0x6ec7]
[ 0.461894] pci 0000:00:1f.2: reg 0x1c: [io 0x6ec8-0x6ecb]
[ 0.461906] pci 0000:00:1f.2: reg 0x20: [io 0x6ee0-0x6eff]
[ 0.461917] pci 0000:00:1f.2: reg 0x24: [mem 0xf6dfb800-0xf6dfbfff]
[ 0.461980] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.462119] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.462142] pci 0000:00:1f.3: reg 0x10: [mem 0xf6dfb700-0xf6dfb7ff]
[ 0.462183] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
[ 0.462389] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 0.462716] pci 0000:0c:00.0: [14e4:4315] type 00 class 0x028000
[ 0.462833] pci 0000:0c:00.0: reg 0x10: [mem 0xf6cfc000-0xf6cfffff
64bit]
[ 0.463028] pci 0000:0c:00.0: enabling Extended Tags
[ 0.463300] pci 0000:0c:00.0: supports D1 D2
[ 0.463302] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.463821] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[ 0.463829] pci 0000:00:1c.1: bridge window [mem
0xf6c00000-0xf6cfffff]
[ 0.463935] acpiphp: Slot [1] registered
[ 0.463942] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.463947] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.463951] pci 0000:00:1c.3: bridge window [mem
0xf6a00000-0xf6bfffff]
[ 0.463958] pci 0000:00:1c.3: bridge window [mem
0xf0000000-0xf01fffff 64bit pref]
[ 0.464099] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000
[ 0.464211] pci 0000:09:00.0: reg 0x10: [mem 0xf69f0000-0xf69fffff
64bit]
[ 0.464406] pci 0000:09:00.0: enabling Extended Tags
[ 0.464692] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.464994] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.465001] pci 0000:00:1c.5: bridge window [mem
0xf6900000-0xf69fffff]
[ 0.465033] pci_bus 0000:03: extended config space not accessible
[ 0.465092] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010
[ 0.465102] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled
(via FireWire function)
[ 0.465103] pci 0000:03:01.0: MMC cards are now supported by standard
SDHCI controller
[ 0.465125] pci 0000:03:01.0: reg 0x10: [mem 0xf68ff800-0xf68fffff]
[ 0.465226] pci 0000:03:01.0: supports D1 D2
[ 0.465228] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.465320] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501
[ 0.465343] pci 0000:03:01.1: reg 0x10: [mem 0xf68ff400-0xf68ff4ff]
[ 0.465445] pci 0000:03:01.1: supports D1 D2
[ 0.465447] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.465515] pci 0000:03:01.2: [1180:0592] type 00 class 0x088000
[ 0.465536] pci 0000:03:01.2: reg 0x10: [mem 0xf68ff600-0xf68ff6ff]
[ 0.465638] pci 0000:03:01.2: supports D1 D2
[ 0.465640] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.465710] pci 0000:03:01.3: [1180:0852] type 00 class 0x088000
[ 0.465732] pci 0000:03:01.3: reg 0x10: [mem 0xf68ff700-0xf68ff7ff]
[ 0.465833] pci 0000:03:01.3: supports D1 D2
[ 0.465835] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.465968] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive
decode)
[ 0.465976] pci 0000:00:1e.0: bridge window [mem
0xf6800000-0xf68fffff]
[ 0.465983] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7
window] (subtractive decode)
[ 0.465985] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff
window] (subtractive decode)
[ 0.465987] pci 0000:00:1e.0: bridge window [mem
0x000a0000-0x000bffff window] (subtractive decode)
[ 0.465988] pci 0000:00:1e.0: bridge window [mem
0x000d0000-0x000dffff window] (subtractive decode)
[ 0.465990] pci 0000:00:1e.0: bridge window [mem
0xe0000000-0xf7ffffff window] (subtractive decode)
[ 0.465992] pci 0000:00:1e.0: bridge window [mem
0xfc000000-0xfebfffff window] (subtractive decode)
[ 0.465994] pci 0000:00:1e.0: bridge window [mem
0xfec10000-0xfecfffff window] (subtractive decode)
[ 0.465995] pci 0000:00:1e.0: bridge window [mem
0xfed1c000-0xfed1ffff window] (subtractive decode)
[ 0.465997] pci 0000:00:1e.0: bridge window [mem
0xfed90000-0xfed9ffff window] (subtractive decode)
[ 0.465999] pci 0000:00:1e.0: bridge window [mem
0xfeda7000-0xfedfffff window] (subtractive decode)
[ 0.466000] pci 0000:00:1e.0: bridge window [mem
0xfee10000-0xff9fffff window] (subtractive decode)
[ 0.466002] pci 0000:00:1e.0: bridge window [mem
0xffc00000-0xffdfffff window] (subtractive decode)
[ 0.466004] pci 0000:00:1e.0: bridge window [mem
0x120000000-0x317ffffff window] (subtractive decode)
[ 0.466645] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.466794] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.466942] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 0.467089] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.467237] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12
14 15)
[ 0.467385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12
14 15)
[ 0.467534] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12
14 15)
[ 0.467662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12
14 15) *0, disabled.
[ 0.468163] iommu: Default domain type: Translated
[ 0.468163] SCSI subsystem initialized
[ 0.468163] libata version 3.00 loaded.
[ 0.468576] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.468576] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.468583] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.468584] vgaarb: loaded
[ 0.468609] ACPI: bus type USB registered
[ 0.468632] usbcore: registered new interface driver usbfs
[ 0.468642] usbcore: registered new interface driver hub
[ 0.468649] usbcore: registered new device driver usb
[ 0.468692] pps_core: LinuxPPS API ver. 1 registered
[ 0.468693] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@...>
[ 0.468697] PTP clock support registered
[ 0.468714] EDAC MC: Ver: 3.0.0
[ 0.468897] PCI: Using ACPI for IRQ routing
[ 0.468897] PCI: pci_cache_line_size set to 64 bytes
[ 0.469056] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.469057] e820: reserve RAM buffer [mem 0xdf66d800-0xdfffffff]
[ 0.469213] NetLabel: Initializing
[ 0.469214] NetLabel: domain hash size = 128
[ 0.469215] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.469237] NetLabel: unlabeled traffic allowed by default
[ 0.474041] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.474046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.474050] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.476414] clocksource: Switched to clocksource tsc-early
[ 0.496403] *** VALIDATE bpf ***
[ 0.496537] VFS: Disk quotas dquot_6.6.0
[ 0.496562] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.496607] *** VALIDATE ramfs ***
[ 0.496611] *** VALIDATE hugetlbfs ***
[ 0.496769] AppArmor: AppArmor Filesystem Enabled
[ 0.496821] pnp: PnP ACPI init
[ 0.496965] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.497021] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.497065] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.497166] system 00:03: [io 0x0c80-0x0cff] could not be reserved
[ 0.497172] system 00:03: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.497283] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.497289] system 00:04: Plug and Play ACPI device, IDs PNP0103
PNP0c01 (active)
[ 0.497486] pnp 00:05: disabling [io 0x1000-0x1005] because it
overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.497489] pnp 00:05: disabling [io 0x1008-0x100f] because it
overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.497520] system 00:05: [io 0x0900-0x097f] has been reserved
[ 0.497523] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.497528] system 00:05: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.497563] pnp 00:06: disabling [io 0x1006-0x1007] because it
overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.497566] pnp 00:06: disabling [io 0x100a-0x1059] because it
overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.497568] pnp 00:06: disabling [io 0x1060-0x107f] because it
overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.497570] pnp 00:06: disabling [io 0x1010-0x102f] because it
overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.497600] system 00:06: [io 0xf400-0xf4fe] has been reserved
[ 0.497603] system 00:06: [io 0x1080-0x10bf] has been reserved
[ 0.497605] system 00:06: [io 0x10c0-0x10df] has been reserved
[ 0.497610] system 00:06: [io 0x0809] has been reserved
[ 0.497616] system 00:06: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.515021] system 00:07: [mem 0x00000000-0x0009efff] could not be
reserved
[ 0.515023] system 00:07: [mem 0x0009f000-0x0009ffff] could not be
reserved
[ 0.515025] system 00:07: [mem 0x000c0000-0x000cffff] could not be
reserved
[ 0.515027] system 00:07: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.515029] system 00:07: [mem 0x00100000-0xdf66d7ff] could not be
reserved
[ 0.515031] system 00:07: [mem 0xdf66d800-0xdf6fffff] has been reserved
[ 0.515033] system 00:07: [mem 0xdf700000-0xdf7fffff] has been reserved
[ 0.515035] system 00:07: [mem 0xdf700000-0xdfefffff] could not be
reserved
[ 0.515037] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.515039] system 00:07: [mem 0xffa00000-0xffbfffff] has been reserved
[ 0.515041] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be
reserved
[ 0.515043] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.515045] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.515047] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 0.515049] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 0.515051] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 0.515053] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 0.515055] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 0.515057] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.515063] system 00:07: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.515151] pnp: PnP ACPI: found 8 devices
[ 0.517283] thermal_sys: Registered thermal governor 'fair_share'
[ 0.517284] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.517285] thermal_sys: Registered thermal governor 'step_wise'
[ 0.517286] thermal_sys: Registered thermal governor 'user_space'
[ 0.517287] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.521800] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.521850] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus
0b] add_size 1000
[ 0.521853] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 0b] add_size 200000 add_align 100000
[ 0.521856] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff]
to [bus 0b] add_size 200000 add_align 100000
[ 0.521859] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus
0c] add_size 1000
[ 0.521861] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 0c] add_size 200000 add_align 100000
[ 0.521864] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus
09] add_size 1000
[ 0.521866] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff
64bit pref] to [bus 09] add_size 200000 add_align 100000
[ 0.521878] pci 0000:00:1c.0: BAR 14: assigned [mem
0xf0200000-0xf03fffff]
[ 0.521884] pci 0000:00:1c.0: BAR 15: assigned [mem
0x120000000-0x1201fffff 64bit pref]
[ 0.521890] pci 0000:00:1c.1: BAR 15: assigned [mem
0x120200000-0x1203fffff 64bit pref]
[ 0.521895] pci 0000:00:1c.5: BAR 15: assigned [mem
0x120400000-0x1205fffff 64bit pref]
[ 0.521898] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.521901] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.521903] pci 0000:00:1c.5: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.521906] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[ 0.521910] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.521916] pci 0000:00:1c.0: bridge window [mem
0xf0200000-0xf03fffff]
[ 0.521921] pci 0000:00:1c.0: bridge window [mem
0x120000000-0x1201fffff 64bit pref]
[ 0.521929] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[ 0.521932] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.521938] pci 0000:00:1c.1: bridge window [mem
0xf6c00000-0xf6cfffff]
[ 0.521942] pci 0000:00:1c.1: bridge window [mem
0x120200000-0x1203fffff 64bit pref]
[ 0.521950] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 0.521952] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.521958] pci 0000:00:1c.3: bridge window [mem
0xf6a00000-0xf6bfffff]
[ 0.521963] pci 0000:00:1c.3: bridge window [mem
0xf0000000-0xf01fffff 64bit pref]
[ 0.521970] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.521973] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.521979] pci 0000:00:1c.5: bridge window [mem
0xf6900000-0xf69fffff]
[ 0.521983] pci 0000:00:1c.5: bridge window [mem
0x120400000-0x1205fffff 64bit pref]
[ 0.521991] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.521997] pci 0000:00:1e.0: bridge window [mem
0xf6800000-0xf68fffff]
[ 0.522008] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.522010] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.522011] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.522013] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff
window]
[ 0.522015] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff
window]
[ 0.522016] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff
window]
[ 0.522018] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff
window]
[ 0.522020] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff
window]
[ 0.522021] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff
window]
[ 0.522023] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff
window]
[ 0.522024] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff
window]
[ 0.522026] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff
window]
[ 0.522028] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff
window]
[ 0.522029] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 0.522031] pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff]
[ 0.522033] pci_bus 0000:0b: resource 2 [mem 0x120000000-0x1201fffff
64bit pref]
[ 0.522034] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 0.522036] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
[ 0.522038] pci_bus 0000:0c: resource 2 [mem 0x120200000-0x1203fffff
64bit pref]
[ 0.522039] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff]
[ 0.522041] pci_bus 0000:0d: resource 1 [mem 0xf6a00000-0xf6bfffff]
[ 0.522043] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff
64bit pref]
[ 0.522044] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
[ 0.522046] pci_bus 0000:09: resource 1 [mem 0xf6900000-0xf69fffff]
[ 0.522047] pci_bus 0000:09: resource 2 [mem 0x120400000-0x1205fffff
64bit pref]
[ 0.522049] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf68fffff]
[ 0.522051] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.522052] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.522054] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.522056] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff
window]
[ 0.522057] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff
window]
[ 0.522059] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff
window]
[ 0.522060] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff
window]
[ 0.522062] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff
window]
[ 0.522064] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff
window]
[ 0.522065] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff
window]
[ 0.522067] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff
window]
[ 0.522068] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff
window]
[ 0.522070] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff
window]
[ 0.522203] NET: Registered protocol family 2
[ 0.522417] IP idents hash table entries: 65536 (order: 7, 524288
bytes, linear)
[ 0.523222] tcp_listen_portaddr_hash hash table entries: 2048 (order:
3, 32768 bytes, linear)
[ 0.523324] TCP established hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.523549] TCP bind hash table entries: 32768 (order: 7, 524288 bytes,
linear)
[ 0.523624] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.523719] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.523756] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes,
linear)
[ 0.523815] NET: Registered protocol family 1
[ 0.523822] NET: Registered protocol family 44
[ 0.523838] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.526535] PCI: CLS 64 bytes, default 64
[ 0.526615] Trying to unpack rootfs image as initramfs...
[ 1.065352] Freeing initrd memory: 87184K
[ 1.065438] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.065440] software IO TLB: mapped [mem 0xdb66d000-0xdf66d000] (64MB)
[ 1.065653] check: Scanning for low memory corruption every 60 seconds
[ 1.066243] Initialise system trusted keyrings
[ 1.066259] Key type blacklist registered
[ 1.066352] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.068547] zbud: loaded
[ 1.069101] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.069367] fuse: init (API version 7.31)
[ 1.069394] *** VALIDATE fuse ***
[ 1.069396] *** VALIDATE fuse ***
[ 1.069541] Platform Keyring initialized
[ 1.073561] Key type asymmetric registered
[ 1.073564] Asymmetric key parser 'x509' registered
[ 1.073578] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 244)
[ 1.073628] io scheduler mq-deadline registered
[ 1.074882] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.074953] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.074954] vesafb: scrolling: redraw
[ 1.074955] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.074983] vesafb: framebuffer at 0xe0000000, mapped to
0x(____ptrval____), using 3072k, total 3072k
[ 1.075040] fbcon: Deferring console take-over
[ 1.075041] fb0: VESA VGA frame buffer device
[ 1.075058] intel_idle: does not run on family 6 model 23
[ 1.075263] ACPI: AC Adapter [AC] (on-line)
[ 1.075339] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.075393] ACPI: Lid Switch [LID]
[ 1.075438] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.075473] ACPI: Power Button [PBTN]
[ 1.075516] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.075544] ACPI: Sleep Button [SBTN]
[ 1.075692] Monitor-Mwait will be used to enter C-1 state
[ 1.075696] Monitor-Mwait will be used to enter C-2 state
[ 1.075699] Monitor-Mwait will be used to enter C-3 state
[ 1.075703] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.075780] clocksource: Switched to clocksource hpet
[ 1.083939] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.083941] ACPI: Thermal Zone [THM] (28 C)
[ 1.084103] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.093653] Linux agpgart interface v0.103
[ 1.114263] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.300684] loop: module loaded
[ 1.300971] ata_piix 0000:00:1f.1: version 2.13
[ 1.302093] scsi host0: ata_piix
[ 1.302322] scsi host1: ata_piix
[ 1.302375] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0
irq 14
[ 1.302376] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8
irq 15
[ 1.302509] libphy: Fixed MDIO Bus: probed
[ 1.302510] tun: Universal TUN/TAP device driver, 1.6
[ 1.302552] ata2: port disabled--ignoring
[ 1.302571] PPP generic driver version 2.4.2
[ 1.302673] VFIO - User Level meta-driver version: 0.3
[ 1.302760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.302767] ehci-pci: EHCI PCI platform driver
[ 1.303004] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.303011] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 1.303027] ehci-pci 0000:00:1a.7: debug port 1
[ 1.306964] ehci-pci 0000:00:1a.7: cache line size of 64 is not
supported
[ 1.306977] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.320623] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.320720] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 1.320724] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.320727] usb usb1: Product: EHCI Host Controller
[ 1.320730] usb usb1: Manufacturer: Linux 5.4.0-100-generic ehci_hcd
[ 1.320733] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.320933] hub 1-0:1.0: USB hub found
[ 1.320941] hub 1-0:1.0: 4 ports detected
[ 1.321350] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.321356] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 1.321369] ehci-pci 0000:00:1d.7: debug port 1
[ 1.325275] ehci-pci 0000:00:1d.7: cache line size of 64 is not
supported
[ 1.325289] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.344820] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.344910] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.04
[ 1.344912] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.344913] usb usb2: Product: EHCI Host Controller
[ 1.344915] usb usb2: Manufacturer: Linux 5.4.0-100-generic ehci_hcd
[ 1.344916] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.345053] hub 2-0:1.0: USB hub found
[ 1.345060] hub 2-0:1.0: 6 ports detected
[ 1.345327] ehci-platform: EHCI generic platform driver
[ 1.345343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.345346] ohci-pci: OHCI PCI platform driver
[ 1.345359] ohci-platform: OHCI generic platform driver
[ 1.345367] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.345576] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.345582] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 1.345590] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.345610] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 1.345681] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 1.345683] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.345684] usb usb3: Product: UHCI Host Controller
[ 1.345686] usb usb3: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[ 1.345687] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.345844] hub 3-0:1.0: USB hub found
[ 1.345852] hub 3-0:1.0: 2 ports detected
[ 1.346196] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.346205] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 1.346225] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.346253] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 1.346309] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 1.346311] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.346312] usb usb4: Product: UHCI Host Controller
[ 1.346314] usb usb4: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[ 1.346315] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.346455] hub 4-0:1.0: USB hub found
[ 1.346463] hub 4-0:1.0: 2 ports detected
[ 1.346780] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.346786] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 1.346793] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.346813] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 1.346869] usb usb5: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 1.346871] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.346873] usb usb5: Product: UHCI Host Controller
[ 1.346874] usb usb5: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[ 1.346876] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.347014] hub 5-0:1.0: USB hub found
[ 1.347021] hub 5-0:1.0: 2 ports detected
[ 1.347341] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.347347] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 1.347354] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.347374] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 1.347429] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 1.347431] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.347433] usb usb6: Product: UHCI Host Controller
[ 1.347434] usb usb6: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[ 1.347435] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.347576] hub 6-0:1.0: USB hub found
[ 1.347584] hub 6-0:1.0: 2 ports detected
[ 1.347903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.347909] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 1.347916] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.347937] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.348008] usb usb7: New USB device found, idVendor=1d6b,
idProduct=0001, bcdDevice= 5.04
[ 1.348010] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.348012] usb usb7: Product: UHCI Host Controller
[ 1.348013] usb usb7: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[ 1.348015] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.348147] hub 7-0:1.0: USB hub found
[ 1.348155] hub 7-0:1.0: 2 ports detected
[ 1.348375] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.351294] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.351299] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.351486] mousedev: PS/2 mouse device common for all mice
[ 1.351756] rtc_cmos 00:02: RTC can wake from S4
[ 1.352033] rtc_cmos 00:02: registered as rtc0
[ 1.352056] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes
nvram, hpet irqs
[ 1.352065] i2c /dev entries driver
[ 1.352129] device-mapper: uevent: version 1.0.3
[ 1.352218] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16)
initialised: dm-devel@...
[ 1.352245] platform eisa.0: Probing EISA bus 0
[ 1.352248] platform eisa.0: EISA: Cannot allocate resource for
mainboard
[ 1.352250] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.352251] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.352253] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.352254] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.352256] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.352258] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.352259] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.352261] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.352262] platform eisa.0: EISA: Detected 0 cards
[ 1.352266] intel_pstate: CPU model not supported
[ 1.352309] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.352409] drop_monitor: Initializing network drop monitor service
[ 1.352663] NET: Registered protocol family 10
[ 1.354636] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
[ 1.362094] Segment Routing with IPv6
[ 1.362131] NET: Registered protocol family 17
[ 1.362199] Key type dns_resolver registered
[ 1.362447] RAS: Correctable Errors collector initialized.
[ 1.362497] microcode: sig=0x10676, pf=0x80, revision=0x60f
[ 1.362562] microcode: Microcode Update Driver: v2.2.
[ 1.362568] IPI shorthand broadcast: enabled
[ 1.362651] registered taskstats version 1
[ 1.362665] Loading compiled-in X.509 certificates
[ 1.363890] Loaded X.509 cert 'Build time autogenerated kernel key:
e1b319a0371e066477db7ea429c6076e950e5e49'
[ 1.364989] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing:
14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.366057] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing:
88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.366058] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.366084] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing:
61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.366121] zswap: loaded using pool lzo/zbud
[ 1.366269] Key type ._fscrypt registered
[ 1.366270] Key type .fscrypt registered
[ 1.374772] Key type big_key registered
[ 1.378994] Key type encrypted registered
[ 1.378999] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.379008] ima: No TPM chip found, activating TPM-bypass!
[ 1.379015] ima: Allocated hash algorithm: sha1
[ 1.379024] ima: No architecture policies found
[ 1.379040] evm: Initialising EVM extended attributes:
[ 1.379041] evm: security.selinux
[ 1.379042] evm: security.SMACK64
[ 1.379043] evm: security.SMACK64EXEC
[ 1.379043] evm: security.SMACK64TRANSMUTE
[ 1.379044] evm: security.SMACK64MMAP
[ 1.379044] evm: security.apparmor
[ 1.379045] evm: security.ima
[ 1.379046] evm: security.capability
[ 1.379047] evm: HMAC attrs: 0x1
[ 1.379626] PM: Magic number: 10:129:349
[ 1.379813] rtc_cmos 00:02: setting system clock to 2022-02-22T21:18:36
UTC (1645564716)
[ 1.380987] Unstable clock detected, switching default tracing clock to
"global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.481197] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-S10N, A103, max
UDMA/33
[ 1.509416] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-S10N
A103 PQ: 0 ANSI: 5
[ 1.575354] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw
xa/form2 cdda caddy
[ 1.575357] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.576767] random: fast init done
[ 1.596867] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.596976] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.598979] Freeing unused decrypted memory: 2040K
[ 1.600427] Freeing unused kernel image memory: 2752K
[ 1.612802] Write protecting the kernel read-only data: 26624k
[ 1.614258] Freeing unused kernel image memory: 2008K
[ 1.614772] Freeing unused kernel image memory: 740K
[ 1.629015] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.629049] x86/mm: Checking user space page tables
[ 1.643062] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.643069] Run /init as init process
[ 1.659692] random: systemd-udevd: uninitialized urandom read (16 bytes
read)
[ 1.660944] random: systemd-udevd: uninitialized urandom read (16 bytes
read)
[ 1.660957] random: systemd-udevd: uninitialized urandom read (16 bytes
read)
[ 1.781879] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control
method not found
[ 1.795694] tg3.c:v3.137 (May 11, 2014)
[ 1.804619] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 1.805748] sdhci: Secure Digital Host Controller Interface driver
[ 1.805749] sdhci: Copyright(c) Pierre Ossman
[ 1.816876] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95906) rev c002]
(PCI Express) MAC address 00:1d:09:61:d4:32
[ 1.816881] tg3 0000:09:00.0 eth0: attached PHY is 5906 (10/100Base-TX
Ethernet) (WireSpeed[0], EEE[0])
[ 1.816883] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[0]
[ 1.816885] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.818776] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822]
(rev 22)
[ 1.818960] mmc0 bounce up to 128 segments into one, max segment size
65536 bytes
[ 1.823164] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.842053] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 1.851502] ahci 0000:00:1f.2: version 3.0
[ 1.851903] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x5 impl SATA mode
[ 1.851906] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio
slum part ccc ems
[ 1.864349] pci 0000:00:00.0: Intel 965GM Chipset
[ 1.864368] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K
mappable
[ 1.865118] pci 0000:00:00.0: detected 8192K stolen memory
[ 1.865188] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 1.865190] fb0: switching to inteldrmfb from VESA VGA
[ 1.865315] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.868212] scsi host2: ahci
[ 1.904746] firewire_ohci 0000:03:01.0: added OHCI v1.10 device as card
0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.906086] scsi host3: ahci
[ 1.907219] scsi host4: ahci
[ 1.907313] ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port
0xf6dfb900 irq 24
[ 1.907315] ata4: DUMMY
[ 1.907318] ata5: SATA max UDMA/133 abar m2048@0xf6dfb800 port
0xf6dfba00 irq 24
[ 1.933713] tg3 0000:09:00.0 enp9s0: renamed from eth0
[ 1.937145] gpio_ich gpio_ich.2.auto: GPIO from 462 to 511
[ 1.938172] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.938174] [drm] Driver supports precise vblank timestamp query.
[ 2.002814] usb 7-1: New USB device found, idVendor=0483,
idProduct=2016, bcdDevice= 0.01
[ 2.002816] usb 7-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.002818] usb 7-1: Product: Biometric Coprocessor
[ 2.002820] usb 7-1: Manufacturer: STMicroelectronics
[ 2.219307] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.223309] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.230889] ata3.00: ATA-8: TOSHIBA THNSNS128GCSP, TA4ABBF0, max
UDMA/133
[ 2.230891] ata3.00: 250069680 sectors, multi 8: LBA48 NCQ (depth 32),
AA
[ 2.240902] ata3.00: configured for UDMA/133
[ 2.241092] scsi 2:0:0:0: Direct-Access ATA TOSHIBA THNSNS12
BBF0 PQ: 0 ANSI: 5
[ 2.241312] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.241531] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128
GB/119 GiB)
[ 2.241551] sd 2:0:0:0: [sda] Write Protect is off
[ 2.241553] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.241587] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.278216] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.281523] sda: sda1 sda2 sda3 < sda5 >
[ 2.304868] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.409451] [drm] RC6 disabled, disabling runtime PM support
[ 2.409645] [drm] Initialized overlay support.
[ 2.410261] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on
minor 0
[ 2.410567] ACPI: Video Device [VID1] (multi-head: yes rom: no post:
no)
[ 2.420834] firewire_core 0000:03:01.0: created device fw0: GUID
434fc000010f1090, S400
[ 2.431502] acpi device:34: registered as cooling_device2
[ 2.441585] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input6
[ 2.441683] [Firmware Bug]: Duplicate ACPI video bus devices for the
same VGA controller, please try module parameter
"video.allow_duplicates=1"if the current driver doesn't work.
[ 2.458207] fbcon: i915drmfb (fb0) is primary device
[ 2.458208] fbcon: Deferring console take-over
[ 2.458213] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.502518] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id:
0x1c0b1, caps: 0xa04751/0xa00000/0x0/0x0, board id: 0, fw id: 436373
[ 2.504813] usb 2-6: new high-speed USB device number 3 using ehci-pci
[ 2.536888] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input5
[ 2.669972] usb 2-6: New USB device found, idVendor=05a9,
idProduct=2640, bcdDevice= 1.00
[ 2.669977] usb 2-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.669980] usb 2-6: Product: Laptop Integrated Webcam
[ 2.669983] usb 2-6: Manufacturer: OmniVision Technologies, Inc.
-2640-08.05.12.1
[ 3.544598] raid6: sse2x4 gen() 7580 MB/s
[ 3.592598] raid6: sse2x4 xor() 5685 MB/s
[ 3.640599] raid6: sse2x2 gen() 4226 MB/s
[ 3.688600] raid6: sse2x2 xor() 5209 MB/s
[ 3.736606] raid6: sse2x1 gen() 3772 MB/s
[ 3.784598] raid6: sse2x1 xor() 4266 MB/s
[ 3.784599] raid6: using algorithm sse2x4 gen() 7580 MB/s
[ 3.784600] raid6: .... xor() 5685 MB/s, rmw enabled
[ 3.784601] raid6: using ssse3x2 recovery algorithm
[ 3.788727] xor: measuring software checksum speed
[ 3.828595] prefetch64-sse: 12341.000 MB/sec
[ 3.868594] generic_sse: 10687.000 MB/sec
[ 3.868596] xor: using function: prefetch64-sse (12341.000 MB/sec)
[ 3.897146] Btrfs loaded, crc32c=crc32c-generic
[ 4.051529] EXT4-fs (sda5): mounted filesystem with ordered data mode.
Opts: (null)
[ 4.290719] systemd[1]: Inserted module 'autofs4'
[ 4.315514] systemd[1]: systemd 245.4-4ubuntu3.15 running in system
mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP
+LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS
+KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 4.336921] systemd[1]: Detected architecture x86-64.
[ 4.353513] systemd[1]: Set hostname to <reale-XPS-M1330>.
[ 4.748192] systemd[1]: Created slice system-modprobe.slice.
[ 4.748773] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.749216] systemd[1]: Created slice User and Session Slice.
[ 4.749315] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 4.749604] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 4.749688] systemd[1]: Reached target User and Group Name Lookups.
[ 4.749725] systemd[1]: Reached target Remote File Systems.
[ 4.749753] systemd[1]: Reached target Slices.
[ 4.749878] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.750042] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.751895] systemd[1]: Listening on Process Core Dump Socket.
[ 4.752023] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.752113] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.753388] systemd[1]: Listening on Journal Audit Socket.
[ 4.753589] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.753771] systemd[1]: Listening on Journal Socket.
[ 4.753931] systemd[1]: Listening on udev Control Socket.
[ 4.754061] systemd[1]: Listening on udev Kernel Socket.
[ 4.755736] systemd[1]: Mounting Huge Pages File System...
[ 4.757649] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.759851] systemd[1]: Mounting Kernel Debug File System...
[ 4.761909] systemd[1]: Mounting Kernel Trace File System...
[ 4.764539] systemd[1]: Starting Journal Service...
[ 4.766960] systemd[1]: Starting Availability of block devices...
[ 4.772654] systemd[1]: Starting Set the console keyboard layout...
[ 4.775828] systemd[1]: Starting Create list of static device nodes for
the current kernel...
[ 4.778379] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots
etc. using dmeventd or progress polling...
[ 4.778481] systemd[1]: Condition check resulted in Load Kernel Module
drm being skipped.
[ 4.779894] systemd[1]: Condition check resulted in Set Up Additional
Binary Formats being skipped.
[ 4.779965] systemd[1]: Condition check resulted in File System Check
on Root Device being skipped.
[ 4.782950] systemd[1]: Starting Load Kernel Modules...
[ 4.786491] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.789630] systemd[1]: Starting udev Coldplug all Devices...
[ 4.794603] systemd[1]: Starting Uncomplicated firewall...
[ 4.797885] systemd[1]: Mounted Huge Pages File System.
[ 4.798181] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.798406] systemd[1]: Mounted Kernel Debug File System.
[ 4.798626] systemd[1]: Mounted Kernel Trace File System.
[ 4.799631] systemd[1]: Finished Availability of block devices.
[ 4.803864] systemd[1]: Finished Create list of static device nodes for
the current kernel.
[ 4.806360] systemd[1]: Finished Uncomplicated firewall.
[ 4.822853] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 4.826615] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 4.828394] systemd[1]: Activating swap /swapfile...
[ 4.829952] systemd[1]: Condition check resulted in Rebuild Hardware
Database being skipped.
[ 4.830078] systemd[1]: Condition check resulted in Platform Persistent
Storage Archival being skipped.
[ 4.831830] systemd[1]: Starting Load/Save Random Seed...
[ 4.833991] systemd[1]: Starting Create System Users...
[ 4.860196] systemd[1]: Finished Load/Save Random Seed.
[ 4.884263] systemd[1]: Finished Create System Users.
[ 4.887192] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.889991] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots
etc. using dmeventd or progress polling.
[ 4.891665] lp: driver loaded but no devices found
[ 4.908084] ppdev: user-space parallel port driver
[ 4.922768] systemd[1]: Finished Load Kernel Modules.
[ 4.925609] systemd[1]: Mounting FUSE Control File System...
[ 4.928802] systemd[1]: Mounting Kernel Configuration File System...
[ 4.933022] systemd[1]: Starting Apply Kernel Variables...
[ 4.941590] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 4.945107] systemd[1]: Mounted FUSE Control File System.
[ 4.946020] systemd[1]: Mounted Kernel Configuration File System.
[ 4.948451] systemd[1]: Starting udev Kernel Device Manager...
[ 4.970529] systemd[1]: Finished Apply Kernel Variables.
[ 5.155788] systemd[1]: Finished udev Coldplug all Devices.
[ 5.157765] Adding 2097148k swap on /swapfile. Priority:-2 extents:6
across:2260988k SSFS
[ 5.157993] systemd[1]: Starting Helper to synchronize boot up for
ifupdown...
[ 5.158128] systemd[1]: Activated swap /swapfile.
[ 5.158283] systemd[1]: Reached target Swap.
[ 5.165245] systemd[1]: Finished Helper to synchronize boot up for
ifupdown.
[ 5.170845] systemd[1]: Started udev Kernel Device Manager.
[ 5.190245] systemd[1]: Finished Set the console keyboard layout.
[ 5.190582] systemd[1]: Reached target Local File Systems (Pre).
[ 5.192292] systemd[1]: Starting Show Plymouth Boot Screen...
[ 5.213452] systemd[1]: plymouth-start.service: Succeeded.
[ 5.214317] systemd[1]: Started Show Plymouth Boot Screen.
[ 5.214615] systemd[1]: Condition check resulted in Dispatch Password
Requests to Console Directory Watch being skipped.
[ 5.214822] systemd[1]: Started Forward Password Requests to Plymouth
Directory Watch.
[ 5.214866] systemd[1]: Reached target Local Encrypted Volumes.
[ 5.261151] systemd[1]: Started Journal Service.
[ 5.273413] systemd-journald[293]: Received client request to flush
runtime journal.
[ 6.328688] r592: driver successfully loaded
[ 6.437320] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 6.468402] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.508133] mc: Linux media interface: v0.10
[ 6.510976] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.3)
[ 6.511116] r852: driver loaded successfully
[ 6.552953] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI
SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[ 6.578109] input: Dell WMI hotkeys as
/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
[ 6.639154] wl: loading out-of-tree module taints kernel.
[ 6.639161] wl: module license 'MIXED/Proprietary' taints kernel.
[ 6.639162] Disabling lock debugging due to kernel taint
[ 6.659094] videodev: Linux video capture interface: v2.00
[ 6.728058] wl: module verification failed: signature and/or required
key missing - tainting kernel
[ 6.752281] kvm: disabled by bios
[ 6.792874] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam
(05a9:2640)
[ 6.806472] input: Laptop Integrated Webcam: Lapto as
/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input8
[ 6.806798] usbcore: registered new interface driver uvcvideo
[ 6.806799] USB Video Class driver (1.1.1)
[ 6.815322] kvm: disabled by bios
[ 6.843789] intel_powerclamp: No package C-state available
[ 7.185972] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller
6.30.223.271 (r587334)
[ 7.217179] intel_powerclamp: No package C-state available
[ 7.334943] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9228:
line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 7.334946] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 7.334948] snd_hda_codec_idt hdaudioC0D0: hp_outs=2
(0xf/0xa/0x0/0x0/0x0)
[ 7.334950] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 7.334951] snd_hda_codec_idt hdaudioC0D0: dig-out=0x21/0x0
[ 7.334953] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 7.334955] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x13
[ 7.334957] snd_hda_codec_idt hdaudioC0D0: Mic=0xe
[ 7.410297] wl 0000:0c:00.0 wlp12s0: renamed from wlan0
[ 7.658978] audit: type=1400 audit(1645564722.776:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed"
pid=515 comm="apparmor_parser"
[ 7.671653] audit: type=1400 audit(1645564722.788:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump"
pid=516 comm="apparmor_parser"
[ 7.682853] audit: type=1400 audit(1645564722.800:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=519 comm="apparmor_parser"
[ 7.682858] audit: type=1400 audit(1645564722.800:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd"
pid=519 comm="apparmor_parser"
[ 7.682861] audit: type=1400 audit(1645564722.800:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/sbin/cupsd//third_party" pid=519 comm="apparmor_parser"
[ 7.685491] audit: type=1400 audit(1645564722.804:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe"
pid=521 comm="apparmor_parser"
[ 7.685496] audit: type=1400 audit(1645564722.804:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=521 comm="apparmor_parser"
[ 7.704647] audit: type=1400 audit(1645564722.820:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=522 comm="apparmor_parser"
[ 7.713966] audit: type=1400 audit(1645564722.832:10):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="lsb_release" pid=524 comm="apparmor_parser"
[ 7.732428] audit: type=1400 audit(1645564722.848:11):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/lightdm/lightdm-guest-session" pid=525 comm="apparmor_parser"
[ 8.509483] input: HDA Intel Front Headphone Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.509572] input: HDA Intel Front Headphone Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.509646] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.170838] IPv6: ADDRCONF(NETDEV_CHANGE): wlp12s0: link becomes ready
[ 16.741713] random: crng init done
[ 16.741716] random: 7 urandom warning(s) missed due to ratelimiting
[ 73.772862] usb 2-1: new high-speed USB device number 4 using ehci-pci
[ 73.941490] usb 2-1: New USB device found, idVendor=1a40,
idProduct=0201, bcdDevice= 1.00
[ 73.941496] usb 2-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 73.941499] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 73.942055] hub 2-1:1.0: USB hub found
[ 73.942217] hub 2-1:1.0: 7 ports detected
[ 74.248714] usb 2-1.6: new low-speed USB device number 5 using ehci-pci
[ 74.382141] usb 2-1.6: New USB device found, idVendor=1c4f,
idProduct=0034, bcdDevice= 1.10
[ 74.382149] usb 2-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 74.382154] usb 2-1.6: Product: Usb Mouse
[ 74.382159] usb 2-1.6: Manufacturer: SIGMACHIP
[ 74.410318] hidraw: raw HID events driver (C) Jiri Kosina
[ 74.418041] usbcore: registered new interface driver usbhid
[ 74.418043] usbhid: USB HID core driver
[ 74.434747] input: SIGMACHIP Usb Mouse as
/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.6/2-1.6:1.0/0003:1C4F:0034.0001/input/input12
[ 74.493350] hid-generic 0003:1C4F:0034.0001: input,hidraw0: USB HID
v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.7-1.6/input0
[ 149.448820] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 149.647997] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 149.648005] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 149.648010] usb 5-2: Product: CDC-ACM Demo
[ 149.648015] usb 5-2: Manufacturer: Black Sphere Technologies
[ 149.648019] usb 5-2: SerialNumber: DEMO
[ 149.783924] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 149.786530] usbcore: registered new interface driver cdc_acm
[ 149.786532] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 218.029121] perf: interrupt took too long (2519 > 2500), lowering
kernel.perf_event_max_sample_rate to 79250
[ 247.589311] perf: interrupt took too long (3162 > 3148), lowering
kernel.perf_event_max_sample_rate to 63250
[ 253.882243] TCP: wlp12s0: Driver has suspect GRO implementation, TCP
performance may be compromised.
[ 331.665055] usb 5-2: USB disconnect, device number 2
[ 367.948787] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[ 368.345843] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 368.345851] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 368.345857] usb 5-2: Product: CDC-ACM Demo
[ 368.345862] usb 5-2: Manufacturer: Black Sphere Technologies
[ 368.345866] usb 5-2: SerialNumber: DEMO
[ 368.347924] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 410.536678] usb 2-1: USB disconnect, device number 4
[ 410.536687] usb 2-1.6: USB disconnect, device number 5
[ 414.768694] usb 5-1: new low-speed USB device number 4 using uhci_hcd
[ 414.961970] usb 5-1: New USB device found, idVendor=1c4f,
idProduct=0034, bcdDevice= 1.10
[ 414.961976] usb 5-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 414.961979] usb 5-1: Product: Usb Mouse
[ 414.961982] usb 5-1: Manufacturer: SIGMACHIP
[ 414.978594] input: SIGMACHIP Usb Mouse as
/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:1C4F:0034.0002/input/input13
[ 414.978833] hid-generic 0003:1C4F:0034.0002: input,hidraw0: USB HID
v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-1/input0
[ 443.452600] perf: interrupt took too long (3955 > 3952), lowering
kernel.perf_event_max_sample_rate to 50500
[ 729.727604] perf: interrupt took too long (4944 > 4943), lowering
kernel.perf_event_max_sample_rate to 40250
[ 1022.344830] usb 5-2: USB disconnect, device number 3
[ 1026.836697] usb 5-2: new full-speed USB device number 5 using uhci_hcd
[ 1026.972665] usb 5-2: device descriptor read/64, error -71
[ 1027.216670] usb 5-2: device descriptor read/64, error -71
[ 1027.452667] usb 5-2: new full-speed USB device number 6 using uhci_hcd
[ 1027.588657] usb 5-2: device descriptor read/64, error -71
[ 1027.832652] usb 5-2: device descriptor read/64, error -71
[ 1027.940729] usb usb5-port2: attempt power cycle
[ 1027.940752] usb usb5-port2: failed to disable port power
[ 1028.068755] usb 5-2: new full-speed USB device number 7 using uhci_hcd
[ 1028.484716] usb 5-2: device not accepting address 7, error -71
[ 1028.612666] usb 5-2: new full-speed USB device number 8 using uhci_hcd
[ 1029.028690] usb 5-2: device not accepting address 8, error -71
[ 1029.028749] usb usb5-port2: unable to enumerate USB device
[ 1065.768610] usb 5-2: new full-speed USB device number 9 using uhci_hcd
[ 1065.904680] usb 5-2: device descriptor read/64, error -71
[ 1066.148659] usb 5-2: device descriptor read/64, error -71
[ 1066.384629] usb 5-2: new full-speed USB device number 10 using uhci_hcd
[ 1066.520658] usb 5-2: device descriptor read/64, error -71
[ 1066.764680] usb 5-2: device descriptor read/64, error -71
[ 1066.872881] usb usb5-port2: attempt power cycle
[ 1066.872909] usb usb5-port2: failed to disable port power
[ 1067.000606] usb 5-2: new full-speed USB device number 11 using uhci_hcd
[ 1067.416602] usb 5-2: device not accepting address 11, error -71
[ 1067.544672] usb 5-2: new full-speed USB device number 12 using uhci_hcd
[ 1067.960664] usb 5-2: device not accepting address 12, error -71
[ 1067.960729] usb usb5-port2: unable to enumerate USB device
[ 1071.968692] usb 5-2: new full-speed USB device number 13 using uhci_hcd
[ 1072.154403] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 1072.154408] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1072.154412] usb 5-2: Product: CDC-ACM Demo
[ 1072.154415] usb 5-2: Manufacturer: Black Sphere Technologies
[ 1072.154418] usb 5-2: SerialNumber: DEMO
[ 1072.156460] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 1076.408843] usb 5-2: USB disconnect, device number 13
[ 1077.176655] usb 5-2: new full-speed USB device number 14 using uhci_hcd
[ 1095.528755] usb 5-2: new full-speed USB device number 15 using uhci_hcd
[ 1095.717402] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 1095.717410] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1095.717416] usb 5-2: Product: CDC-ACM Demo
[ 1095.717421] usb 5-2: Manufacturer: Black Sphere Technologies
[ 1095.717425] usb 5-2: SerialNumber: DEMO
[ 1095.719586] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 1406.696727] perf: interrupt took too long (6199 > 6180), lowering
kernel.perf_event_max_sample_rate to 32250
[ 2814.396036] kauditd_printk_skb: 13 callbacks suppressed
[ 2814.396038] audit: type=1400 audit(1645567530.974:25):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/snapd/snap-confine" pid=8952 comm="apparmor_parser"
[ 2814.397175] audit: type=1400 audit(1645567530.978:26):
apparmor="STATUS" operation="profile_load" profile="unconfined"
name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8952
comm="apparmor_parser"
[ 2834.731502] CE: hpet increased min_delta_ns to 20115 nsec
[ 3055.200879] usb 5-2: USB disconnect, device number 15
[ 3056.464748] usb 5-2: new full-speed USB device number 16 using uhci_hcd
[ 3056.657770] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 3056.657779] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3056.657784] usb 5-2: Product: CDC-ACM Demo
[ 3056.657789] usb 5-2: Manufacturer: Black Sphere Technologies
[ 3056.657793] usb 5-2: SerialNumber: DEMO
[ 3056.661207] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 3079.008804] usb 5-2: USB disconnect, device number 16
[ 3081.272810] usb 5-2: new full-speed USB device number 17 using uhci_hcd
[ 3081.461827] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 3081.461835] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3081.461842] usb 5-2: Product: CDC-ACM Demo
[ 3081.461847] usb 5-2: Manufacturer: Black Sphere Technologies
[ 3081.461851] usb 5-2: SerialNumber: DEMO
[ 3081.464929] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 3391.984896] usb 5-2: USB disconnect, device number 17
[ 3395.176713] usb 5-2: new full-speed USB device number 18 using uhci_hcd
[ 3395.312981] usb 5-2: device descriptor read/64, error -71
[ 3395.568727] usb 5-2: device descriptor read/64, error -71
[ 3395.804821] usb 5-2: new full-speed USB device number 19 using uhci_hcd
[ 3395.940692] usb 5-2: device descriptor read/64, error -71
[ 3396.184671] usb 5-2: device descriptor read/64, error -71
[ 3396.292855] usb usb5-port2: attempt power cycle
[ 3396.292880] usb usb5-port2: failed to disable port power
[ 3396.420721] usb 5-2: new full-speed USB device number 20 using uhci_hcd
[ 3396.836749] usb 5-2: device not accepting address 20, error -71
[ 3396.968728] usb 5-2: new full-speed USB device number 21 using uhci_hcd
[ 3397.388728] usb 5-2: device not accepting address 21, error -71
[ 3397.388796] usb usb5-port2: unable to enumerate USB device
[ 3740.200700] usb 5-2: new full-speed USB device number 23 using uhci_hcd
[ 3740.383586] usb 5-2: New USB device found, idVendor=04b4,
idProduct=0008, bcdDevice= 0.01
[ 3740.383594] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3740.383599] usb 5-2: Product: CDC-ACM Demo
[ 3740.383604] usb 5-2: Manufacturer: Black Sphere Technologies
[ 3740.383608] usb 5-2: SerialNumber: DEMO
[ 3740.389675] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
reale@reale-XPS-M1330:~$

*Sent:* Tuesday, February 22, 2022 at 8:24 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
Try to access the device using the serial terminal.
Plug the device, find the serial port (type dmesg in the terminal, you will
see a message at the end of the output)
and use that in a serial terminal software (cutecom for example) and see if
it works.

On Sun, 20 Feb 2022 at 20:52, Francesco <realfran@...> wrote:

No, if I plug the USB cable from the NanoVNA to the PC and push the icon
to open the NanoSaver software, NOT open up.
If I unplug the USB cable the NanoSaver open up, I select SCAN Refresh
and
NOT see the NanoVNA serial port.
*Sent:* Sunday, February 20, 2022 at 6:16 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
I'm sorry, I do not understand what you are trying to say.
You expect for NanoVNASaver to start on its own when you
plug in the NanoVNA?

On Sun, 20 Feb 2022 at 11:37, Francesco <realfran@...> wrote:

Yes, I install libreVNA with is on software and work, I cheek on
Mint/Ubuntu and give me the list of usb ports, I plug the NanoVNA and
give
me the Cypress USB driver is installed, *I give more detall* : when I
plug
the USB cable from the NanoVNA the Saver software not open, when I
unplug
the cable open up, the problem is NanoSaver software don't open the USB
port.
I tray to put this information on the terminal but not result.
One other information I never use software terminal on my life.
Thank you for the help the only think I doing is "copy and past on the
terminal".
Best regards.
Francesco.
*Sent:* Sunday, February 20, 2022 at 3:39 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
AFAIK Saver does not support LibreVNA

On Sat, 19 Feb 2022 at 10:24, Francesco <realfran@...> wrote:

Hello, I install LibreVNA and work, I use the USB port for different
device and work, the only problem is NanoVNA-Saver is installed but
not
find the the serial/usb device.
*Sent:* Saturday, February 19, 2022 at 4:36 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint



On Sat, 19 Feb 2022 at 01:22, Francesco <realfran@...> wrote:

Hello, I set up one laptop with Mint Linux "cinnamon" I install
NanoVNA
Saver I don't find the "device port" get a problem with the LiteVNA
and
the
NanoVNA V2 plus4.
Please some help, I'm computer illiterate and this is the first
time
I
use
Linux (I'm lost) I install a lot of Python libraries and I get
confused
with the " CONSOLE "
Re: NanoSaver on ubuntu- mint

 

This is CHINO I'm computer illiterate

reale@reale-XPS-M1330:~$? dmesg
[??? 0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[??? 0.000000] Linux version 5.4.0-100-generic (buildd@lcy02-amd64-002) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #113-Ubuntu SMP Thu Feb 3 18:43:29 UTC 2022 (Ubuntu 5.4.0-100.113-generic 5.4.166)
[??? 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-100-generic root=UUID=2b218828-e859-4614-9c1e-cb331d307847 ro quiet splash
[??? 0.000000] KERNEL supported cpus:
[??? 0.000000]?? Intel GenuineIntel
[??? 0.000000]?? AMD AuthenticAMD
[??? 0.000000]?? Hygon HygonGenuine
[??? 0.000000]?? Centaur CentaurHauls
[??? 0.000000]?? zhaoxin?? Shanghai
[??? 0.000000] x86/fpu: x87 FPU will use FXSAVE
[??? 0.000000] BIOS-provided physical RAM map:
[??? 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[??? 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df66d7ff] usable
[??? 0.000000] BIOS-e820: [mem 0x00000000df66d800-0x00000000dfffffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed1bfff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda5fff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[??? 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[??? 0.000000] NX (Execute Disable) protection: active
[??? 0.000000] SMBIOS 2.4 present.
[??? 0.000000] DMI: Dell Inc. XPS M1330?????????????????????? /0N6705, BIOS A15 12/26/2008
[??? 0.000000] tsc: Fast TSC calibration using PIT
[??? 0.000000] tsc: Detected 2394.058 MHz processor
[??? 0.003774] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[??? 0.003776] e820: remove [mem 0x000a0000-0x000fffff] usable
[??? 0.003781] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[??? 0.003788] MTRR default type: uncachable
[??? 0.003789] MTRR fixed ranges enabled:
[??? 0.003790]?? 00000-9FFFF write-back
[??? 0.003791]?? A0000-BFFFF uncachable
[??? 0.003792]?? C0000-CFFFF write-protect
[??? 0.003793]?? D0000-EFFFF uncachable
[??? 0.003794]?? F0000-FFFFF write-protect
[??? 0.003795] MTRR variable ranges enabled:
[??? 0.003797]?? 0 base 000000000 mask F80000000 write-back
[??? 0.003798]?? 1 base 080000000 mask FC0000000 write-back
[??? 0.003799]?? 2 base 0C0000000 mask FE0000000 write-back
[??? 0.003801]?? 3 base 100000000 mask FE0000000 write-back
[??? 0.003802]?? 4 base 0DF800000 mask FFF800000 uncachable
[??? 0.003803]?? 5 base 0DF700000 mask FFFF00000 uncachable
[??? 0.003804]?? 6 disabled
[??? 0.003804]?? 7 disabled
[??? 0.004776] x86/PAT: Configuration [0-7]: WB? WC? UC- UC? WB? WP? UC- WT
[??? 0.004895] total RAM covered: 4087M
[??? 0.005238] Found optimal setting for mtrr clean up
[??? 0.005239]? gran_size: 64K ?? ?chunk_size: 1G ?? ?num_reg: 5 ??? ?lose cover RAM: 0G
[??? 0.006146] e820: update [mem 0xdf700000-0xffffffff] usable ==> reserved
[??? 0.006152] last_pfn = 0xdf66d max_arch_pfn = 0x400000000
[??? 0.038520] check: Scanning 1 areas for low memory corruption
[??? 0.038985] RAMDISK: [mem 0x2d5a7000-0x32acafff]
[??? 0.038993] ACPI: Early table checksum verification disabled
[??? 0.038999] ACPI: RSDP 0x00000000000FBC00 000024 (v02 DELL? )
[??? 0.039003] ACPI: XSDT 0x00000000DF66F200 00005C (v01 DELL?? M08????? 27D80C1A ASL? 00000061)
[??? 0.039010] ACPI: FACP 0x00000000DF66F09C 0000F4 (v04 DELL?? M08????? 27D80C1A ASL? 00000061)
[??? 0.039017] ACPI: DSDT 0x00000000DF66F800 005733 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[??? 0.039022] ACPI: FACS 0x00000000DF67E000 000040
[??? 0.039025] ACPI: FACS 0x00000000DF67E000 000040
[??? 0.039028] ACPI: HPET 0x00000000DF66F300 000038 (v01 DELL?? M08????? 00000001 ASL? 00000061)
[??? 0.039032] ACPI: APIC 0x00000000DF66F400 000068 (v01 DELL?? M08????? 27D80C1A ASL? 00000047)
[??? 0.039036] ACPI: MCFG 0x00000000DF66F3C0 00003E (v16 DELL?? M08????? 27D80C1A ASL? 00000061)
[??? 0.039040] ACPI: SLIC 0x00000000DF66F49C 000176 (v01 DELL?? M08????? 27D80C1A ASL? 00000061)
[??? 0.039044] ACPI: BOOT 0x00000000DF66EFC0 000028 (v01 DELL?? M08????? 27D80C1A ASL? 00000061)
[??? 0.039048] ACPI: SSDT 0x00000000DF66D97A 0004CC (v01 PmRef? CpuPm??? 00003000 INTL 20050624)
[??? 0.039052] ACPI: Reserving FACP table memory at [mem 0xdf66f09c-0xdf66f18f]
[??? 0.039053] ACPI: Reserving DSDT table memory at [mem 0xdf66f800-0xdf674f32]
[??? 0.039054] ACPI: Reserving FACS table memory at [mem 0xdf67e000-0xdf67e03f]
[??? 0.039055] ACPI: Reserving FACS table memory at [mem 0xdf67e000-0xdf67e03f]
[??? 0.039056] ACPI: Reserving HPET table memory at [mem 0xdf66f300-0xdf66f337]
[??? 0.039057] ACPI: Reserving APIC table memory at [mem 0xdf66f400-0xdf66f467]
[??? 0.039058] ACPI: Reserving MCFG table memory at [mem 0xdf66f3c0-0xdf66f3fd]
[??? 0.039059] ACPI: Reserving SLIC table memory at [mem 0xdf66f49c-0xdf66f611]
[??? 0.039060] ACPI: Reserving BOOT table memory at [mem 0xdf66efc0-0xdf66efe7]
[??? 0.039061] ACPI: Reserving SSDT table memory at [mem 0xdf66d97a-0xdf66de45]
[??? 0.039076] ACPI: Local APIC address 0xfee00000
[??? 0.039191] No NUMA configuration found
[??? 0.039192] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[??? 0.039205] NODE_DATA(0) allocated [mem 0x11ffd1000-0x11fffbfff]
[??? 0.039518] Zone ranges:
[??? 0.039519]?? DMA????? [mem 0x0000000000001000-0x0000000000ffffff]
[??? 0.039521]?? DMA32??? [mem 0x0000000001000000-0x00000000ffffffff]
[??? 0.039522]?? Normal?? [mem 0x0000000100000000-0x000000011fffffff]
[??? 0.039523]?? Device?? empty
[??? 0.039524] Movable zone start for each node
[??? 0.039528] Early memory node ranges
[??? 0.039529]?? node?? 0: [mem 0x0000000000001000-0x000000000009efff]
[??? 0.039530]?? node?? 0: [mem 0x0000000000100000-0x00000000df66cfff]
[??? 0.039531]?? node?? 0: [mem 0x0000000100000000-0x000000011fffffff]
[??? 0.039580] Zeroed struct page in unavailable ranges: 2549 pages
[??? 0.039581] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[??? 0.039583] On node 0 totalpages: 1046027
[??? 0.039584]?? DMA zone: 64 pages used for memmap
[??? 0.039585]?? DMA zone: 21 pages reserved
[??? 0.039586]?? DMA zone: 3998 pages, LIFO batch:0
[??? 0.039667]?? DMA32 zone: 14234 pages used for memmap
[??? 0.039668]?? DMA32 zone: 910957 pages, LIFO batch:63
[??? 0.072407]?? Normal zone: 2048 pages used for memmap
[??? 0.072409]?? Normal zone: 131072 pages, LIFO batch:31
[??? 0.077106] Reserving Intel graphics memory at [mem 0xdf800000-0xdfffffff]
[??? 0.077589] ACPI: PM-Timer IO Port: 0x1008
[??? 0.077592] ACPI: Local APIC address 0xfee00000
[??? 0.077606] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[??? 0.077607] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[??? 0.077623] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[??? 0.077626] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[??? 0.077628] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[??? 0.077630] ACPI: IRQ0 used by override.
[??? 0.077631] ACPI: IRQ9 used by override.
[??? 0.077634] Using ACPI (MADT) for SMP configuration information
[??? 0.077636] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[??? 0.077645] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[??? 0.077667] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[??? 0.077669] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[??? 0.077669] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[??? 0.077671] PM: Registered nosave memory: [mem 0xdf66d000-0xdf66dfff]
[??? 0.077672] PM: Registered nosave memory: [mem 0xdf66e000-0xdfffffff]
[??? 0.077673] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[??? 0.077673] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[??? 0.077674] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[??? 0.077675] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[??? 0.077676] PM: Registered nosave memory: [mem 0xfec10000-0xfed17fff]
[??? 0.077676] PM: Registered nosave memory: [mem 0xfed18000-0xfed1bfff]
[??? 0.077677] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[??? 0.077678] PM: Registered nosave memory: [mem 0xfed20000-0xfed8ffff]
[??? 0.077679] PM: Registered nosave memory: [mem 0xfed90000-0xfed9ffff]
[??? 0.077679] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda5fff]
[??? 0.077680] PM: Registered nosave memory: [mem 0xfeda6000-0xfedfffff]
[??? 0.077681] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[??? 0.077682] PM: Registered nosave memory: [mem 0xfee10000-0xffdfffff]
[??? 0.077682] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[??? 0.077685] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[??? 0.077686] Booting paravirtualized kernel on bare hardware
[??? 0.077692] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[??? 0.077700] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[??? 0.078923] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u1048576
[??? 0.078931] pcpu-alloc: s208896 r8192 d28672 u1048576 alloc=1*2097152
[??? 0.078932] pcpu-alloc: [0] 0 1
[??? 0.078976] Built 1 zonelists, mobility grouping on.? Total pages: 1029660
[??? 0.078977] Policy zone: Normal
[??? 0.078980] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-100-generic root=UUID=2b218828-e859-4614-9c1e-cb331d307847 ro quiet splash
[??? 0.081140] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[??? 0.082242] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[??? 0.082305] mem auto-init: stack:off, heap alloc:on, heap free:off
[??? 0.115231] Calgary: detecting Calgary via BIOS EBDA area
[??? 0.115233] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[??? 0.156467] Memory: 3921604K/4184108K available (14339K kernel code, 2400K rwdata, 9500K rodata, 2752K init, 4948K bss, 262504K reserved, 0K cma-reserved)
[??? 0.156480] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[??? 0.156720] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[??? 0.156749] Kernel/User page tables isolation: enabled
[??? 0.156780] ftrace: allocating 44649 entries in 175 pages
[??? 0.180256] rcu: Hierarchical RCU implementation.
[??? 0.180258] rcu: ?? ?RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[??? 0.180260] ?? ?Tasks RCU enabled.
[??? 0.180261] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[??? 0.180262] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[??? 0.184136] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[??? 0.184418] Console: colour dummy device 80x25
[??? 0.184424] printk: console [tty0] enabled
[??? 0.184449] ACPI: Core revision 20190816
[??? 0.184545] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[??? 0.184562] APIC: Switch to symmetric I/O mode setup
[??? 0.185023] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[??? 0.204562] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22824a3a029, max_idle_ns: 440795236508 ns
[??? 0.204567] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.11 BogoMIPS (lpj=9576232)
[??? 0.204569] pid_max: default: 32768 minimum: 301
[??? 0.204611] LSM: Security Framework initializing
[??? 0.204626] Yama: becoming mindful.
[??? 0.204663] AppArmor: AppArmor initialized
[??? 0.204726] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[??? 0.204751] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[??? 0.204776] *** VALIDATE tmpfs ***
[??? 0.204987] *** VALIDATE proc ***
[??? 0.205063] *** VALIDATE cgroup1 ***
[??? 0.205064] *** VALIDATE cgroup2 ***
[??? 0.205127] mce: CPU0: Thermal monitoring enabled (TM2)
[??? 0.205131] process: using mwait in idle threads
[??? 0.205135] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[??? 0.205136] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[??? 0.205140] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[??? 0.205141] Spectre V2 : Mitigation: Full generic retpoline
[??? 0.205142] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[??? 0.205143] Speculative Store Bypass: Vulnerable
[??? 0.205147] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[??? 0.205322] Freeing SMP alternatives memory: 40K
[??? 0.317682] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU???? T8300? @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0x6)
[??? 0.317862] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[??? 0.317870] ... version:??????????????? 2
[??? 0.317871] ... bit width:????????????? 40
[??? 0.317872] ... generic registers:????? 2
[??? 0.317873] ... value mask:???????????? 000000ffffffffff
[??? 0.317874] ... max period:???????????? 000000007fffffff
[??? 0.317874] ... fixed-purpose events:?? 3
[??? 0.317875] ... event mask:???????????? 0000000700000003
[??? 0.317932] rcu: Hierarchical SRCU implementation.
[??? 0.319017] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[??? 0.319080] smp: Bringing up secondary CPUs ...
[??? 0.319290] x86: Booting SMP configuration:
[??? 0.319291] .... node? #0, CPUs:????? #1
[??? 0.322616] smp: Brought up 1 node, 2 CPUs
[??? 0.322616] smpboot: Max logical packages: 1
[??? 0.322616] smpboot: Total of 2 processors activated (9576.23 BogoMIPS)
[??? 0.325022] devtmpfs: initialized
[??? 0.325022] x86/mm: Memory block size: 128MB
[??? 0.325330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[??? 0.325330] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[??? 0.325330] pinctrl core: initialized pinctrl subsystem
[??? 0.325330] PM: RTC time: 21:18:35, date: 2022-02-22
[??? 0.325330] NET: Registered protocol family 16
[??? 0.325330] audit: initializing netlink subsys (disabled)
[??? 0.325330] audit: type=2000 audit(1645564715.140:1): state=initialized audit_enabled=0 res=1
[??? 0.325330] EISA bus registered
[??? 0.325330] cpuidle: using governor ladder
[??? 0.325330] cpuidle: using governor menu
[??? 0.325330] Simple Boot Flag at 0x79 set to 0x80
[??? 0.325330] ACPI: bus type PCI registered
[??? 0.325330] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[??? 0.325330] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[??? 0.325330] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[??? 0.325330] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[??? 0.325330] PCI: Using configuration type 1 for base access
[??? 0.330624] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[??? 0.330624] ACPI: Added _OSI(Module Device)
[??? 0.330624] ACPI: Added _OSI(Processor Device)
[??? 0.330624] ACPI: Added _OSI(3.0 _SCP Extensions)
[??? 0.330624] ACPI: Added _OSI(Processor Aggregator Device)
[??? 0.332568] ACPI: Added _OSI(Linux-Dell-Video)
[??? 0.332569] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[??? 0.332571] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[??? 0.338659] ACPI: 2 ACPI AML tables successfully acquired and loaded
[??? 0.353932] ACPI: Dynamic OEM Table Load:
[??? 0.353938] ACPI: SSDT 0xFFFF8C29DB396C00 000043 (v01 LMPWR? DELLLOM? 00001001 INTL 20050624)
[??? 0.354739] ACPI: Dynamic OEM Table Load:
[??? 0.354744] ACPI: SSDT 0xFFFF8C29DA8E5400 0002C8 (v01 PmRef? Cpu0Ist? 00003000 INTL 20050624)
[??? 0.355496] ACPI: Dynamic OEM Table Load:
[??? 0.355501] ACPI: SSDT 0xFFFF8C29DB355000 0005E5 (v01 PmRef? Cpu0Cst? 00003001 INTL 20050624)
[??? 0.356460] ACPI: Dynamic OEM Table Load:
[??? 0.356465] ACPI: SSDT 0xFFFF8C29DB397700 0000C4 (v01 PmRef? Cpu1Ist? 00003000 INTL 20050624)
[??? 0.356982] ACPI: Dynamic OEM Table Load:
[??? 0.356986] ACPI: SSDT 0xFFFF8C29DA911A80 000085 (v01 PmRef? Cpu1Cst? 00003000 INTL 20050624)
[??? 0.357793] ACPI: Interpreter enabled
[??? 0.357816] ACPI: (supports S0 S3 S4 S5)
[??? 0.357817] ACPI: Using IOAPIC for interrupt routing
[??? 0.357849] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[??? 0.358129] ACPI: Enabled 13 GPEs in block 00 to 1F
[??? 0.443210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[??? 0.443219] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[??? 0.443235] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[??? 0.457201] PCI host bridge to bus 0000:00
[??? 0.457204] pci_bus 0000:00: root bus resource [io? 0x0000-0x0cf7 window]
[??? 0.457205] pci_bus 0000:00: root bus resource [io? 0x0d00-0xffff window]
[??? 0.457207] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[??? 0.457209] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[??? 0.457210] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[??? 0.457216] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[??? 0.457218] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[??? 0.457219] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1ffff window]
[??? 0.457221] pci_bus 0000:00: root bus resource [mem 0xfed90000-0xfed9ffff window]
[??? 0.457222] pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff window]
[??? 0.457224] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff window]
[??? 0.457226] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff window]
[??? 0.457227] pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff window]
[??? 0.457229] pci_bus 0000:00: root bus resource [bus 00-ff]
[??? 0.457243] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[??? 0.457392] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[??? 0.457407] pci 0000:00:02.0: reg 0x10: [mem 0xf6e00000-0xf6efffff 64bit]
[??? 0.457414] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[??? 0.457419] pci 0000:00:02.0: reg 0x20: [io? 0xeff8-0xefff]
[??? 0.457580] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[??? 0.457593] pci 0000:00:02.1: reg 0x10: [mem 0xf6f00000-0xf6ffffff 64bit]
[??? 0.457791] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[??? 0.457853] pci 0000:00:1a.0: reg 0x20: [io? 0x6f20-0x6f3f]
[??? 0.458013] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[??? 0.458074] pci 0000:00:1a.1: reg 0x20: [io? 0x6f00-0x6f1f]
[??? 0.458247] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[??? 0.458274] pci 0000:00:1a.7: reg 0x10: [mem 0xfed1c400-0xfed1c7ff]
[??? 0.458379] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[??? 0.458525] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[??? 0.458558] pci 0000:00:1b.0: reg 0x10: [mem 0xf6dfc000-0xf6dfffff 64bit]
[??? 0.458678] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[??? 0.458834] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[??? 0.458973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[??? 0.459138] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[??? 0.459276] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[??? 0.459441] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[??? 0.459579] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[??? 0.459793] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[??? 0.459931] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[??? 0.460097] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[??? 0.460159] pci 0000:00:1d.0: reg 0x20: [io? 0x6f80-0x6f9f]
[??? 0.460318] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[??? 0.460380] pci 0000:00:1d.1: reg 0x20: [io? 0x6f60-0x6f7f]
[??? 0.460541] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[??? 0.460606] pci 0000:00:1d.2: reg 0x20: [io? 0x6f40-0x6f5f]
[??? 0.460778] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[??? 0.460805] pci 0000:00:1d.7: reg 0x10: [mem 0xfed1c000-0xfed1c3ff]
[??? 0.460909] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[??? 0.461054] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[??? 0.461281] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[??? 0.461403] pci 0000:00:1f.0: quirk: [io? 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[??? 0.461408] pci 0000:00:1f.0: quirk: [io? 0x1080-0x10bf] claimed by ICH6 GPIO
[??? 0.461412] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[??? 0.461418] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[??? 0.461582] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[??? 0.461605] pci 0000:00:1f.1: reg 0x10: [io? 0x01f0-0x01f7]
[??? 0.461617] pci 0000:00:1f.1: reg 0x14: [io? 0x03f4-0x03f7]
[??? 0.461628] pci 0000:00:1f.1: reg 0x18: [io? 0x0170-0x0177]
[??? 0.461640] pci 0000:00:1f.1: reg 0x1c: [io? 0x0374-0x0377]
[??? 0.461651] pci 0000:00:1f.1: reg 0x20: [io? 0x6fa0-0x6faf]
[??? 0.461676] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io? 0x01f0-0x01f7]
[??? 0.461678] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io? 0x03f6]
[??? 0.461679] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io? 0x0170-0x0177]
[??? 0.461681] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io? 0x0376]
[??? 0.461831] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[??? 0.461859] pci 0000:00:1f.2: reg 0x10: [io? 0x6eb0-0x6eb7]
[??? 0.461871] pci 0000:00:1f.2: reg 0x14: [io? 0x6eb8-0x6ebb]
[??? 0.461883] pci 0000:00:1f.2: reg 0x18: [io? 0x6ec0-0x6ec7]
[??? 0.461894] pci 0000:00:1f.2: reg 0x1c: [io? 0x6ec8-0x6ecb]
[??? 0.461906] pci 0000:00:1f.2: reg 0x20: [io? 0x6ee0-0x6eff]
[??? 0.461917] pci 0000:00:1f.2: reg 0x24: [mem 0xf6dfb800-0xf6dfbfff]
[??? 0.461980] pci 0000:00:1f.2: PME# supported from D3hot
[??? 0.462119] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[??? 0.462142] pci 0000:00:1f.3: reg 0x10: [mem 0xf6dfb700-0xf6dfb7ff]
[??? 0.462183] pci 0000:00:1f.3: reg 0x20: [io? 0x10c0-0x10df]
[??? 0.462389] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[??? 0.462716] pci 0000:0c:00.0: [14e4:4315] type 00 class 0x028000
[??? 0.462833] pci 0000:0c:00.0: reg 0x10: [mem 0xf6cfc000-0xf6cfffff 64bit]
[??? 0.463028] pci 0000:0c:00.0: enabling Extended Tags
[??? 0.463300] pci 0000:0c:00.0: supports D1 D2
[??? 0.463302] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[??? 0.463821] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[??? 0.463829] pci 0000:00:1c.1:?? bridge window [mem 0xf6c00000-0xf6cfffff]
[??? 0.463935] acpiphp: Slot [1] registered
[??? 0.463942] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[??? 0.463947] pci 0000:00:1c.3:?? bridge window [io? 0xd000-0xdfff]
[??? 0.463951] pci 0000:00:1c.3:?? bridge window [mem 0xf6a00000-0xf6bfffff]
[??? 0.463958] pci 0000:00:1c.3:?? bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[??? 0.464099] pci 0000:09:00.0: [14e4:1713] type 00 class 0x020000
[??? 0.464211] pci 0000:09:00.0: reg 0x10: [mem 0xf69f0000-0xf69fffff 64bit]
[??? 0.464406] pci 0000:09:00.0: enabling Extended Tags
[??? 0.464692] pci 0000:09:00.0: PME# supported from D3hot D3cold
[??? 0.464994] pci 0000:00:1c.5: PCI bridge to [bus 09]
[??? 0.465001] pci 0000:00:1c.5:?? bridge window [mem 0xf6900000-0xf69fffff]
[??? 0.465033] pci_bus 0000:03: extended config space not accessible
[??? 0.465092] pci 0000:03:01.0: [1180:0832] type 00 class 0x0c0010
[??? 0.465102] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via FireWire function)
[??? 0.465103] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[??? 0.465125] pci 0000:03:01.0: reg 0x10: [mem 0xf68ff800-0xf68fffff]
[??? 0.465226] pci 0000:03:01.0: supports D1 D2
[??? 0.465228] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[??? 0.465320] pci 0000:03:01.1: [1180:0822] type 00 class 0x080501
[??? 0.465343] pci 0000:03:01.1: reg 0x10: [mem 0xf68ff400-0xf68ff4ff]
[??? 0.465445] pci 0000:03:01.1: supports D1 D2
[??? 0.465447] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[??? 0.465515] pci 0000:03:01.2: [1180:0592] type 00 class 0x088000
[??? 0.465536] pci 0000:03:01.2: reg 0x10: [mem 0xf68ff600-0xf68ff6ff]
[??? 0.465638] pci 0000:03:01.2: supports D1 D2
[??? 0.465640] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[??? 0.465710] pci 0000:03:01.3: [1180:0852] type 00 class 0x088000
[??? 0.465732] pci 0000:03:01.3: reg 0x10: [mem 0xf68ff700-0xf68ff7ff]
[??? 0.465833] pci 0000:03:01.3: supports D1 D2
[??? 0.465835] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[??? 0.465968] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[??? 0.465976] pci 0000:00:1e.0:?? bridge window [mem 0xf6800000-0xf68fffff]
[??? 0.465983] pci 0000:00:1e.0:?? bridge window [io? 0x0000-0x0cf7 window] (subtractive decode)
[??? 0.465985] pci 0000:00:1e.0:?? bridge window [io? 0x0d00-0xffff window] (subtractive decode)
[??? 0.465987] pci 0000:00:1e.0:?? bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[??? 0.465988] pci 0000:00:1e.0:?? bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[??? 0.465990] pci 0000:00:1e.0:?? bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[??? 0.465992] pci 0000:00:1e.0:?? bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[??? 0.465994] pci 0000:00:1e.0:?? bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[??? 0.465995] pci 0000:00:1e.0:?? bridge window [mem 0xfed1c000-0xfed1ffff window] (subtractive decode)
[??? 0.465997] pci 0000:00:1e.0:?? bridge window [mem 0xfed90000-0xfed9ffff window] (subtractive decode)
[??? 0.465999] pci 0000:00:1e.0:?? bridge window [mem 0xfeda7000-0xfedfffff window] (subtractive decode)
[??? 0.466000] pci 0000:00:1e.0:?? bridge window [mem 0xfee10000-0xff9fffff window] (subtractive decode)
[??? 0.466002] pci 0000:00:1e.0:?? bridge window [mem 0xffc00000-0xffdfffff window] (subtractive decode)
[??? 0.466004] pci 0000:00:1e.0:?? bridge window [mem 0x120000000-0x317ffffff window] (subtractive decode)
[??? 0.466645] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[??? 0.466794] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[??? 0.466942] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[??? 0.467089] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[??? 0.467237] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[??? 0.467385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[??? 0.467534] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[??? 0.467662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[??? 0.468163] iommu: Default domain type: Translated
[??? 0.468163] SCSI subsystem initialized
[??? 0.468163] libata version 3.00 loaded.
[??? 0.468576] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[??? 0.468576] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[??? 0.468583] pci 0000:00:02.0: vgaarb: bridge control possible
[??? 0.468584] vgaarb: loaded
[??? 0.468609] ACPI: bus type USB registered
[??? 0.468632] usbcore: registered new interface driver usbfs
[??? 0.468642] usbcore: registered new interface driver hub
[??? 0.468649] usbcore: registered new device driver usb
[??? 0.468692] pps_core: LinuxPPS API ver. 1 registered
[??? 0.468693] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...>
[??? 0.468697] PTP clock support registered
[??? 0.468714] EDAC MC: Ver: 3.0.0
[??? 0.468897] PCI: Using ACPI for IRQ routing
[??? 0.468897] PCI: pci_cache_line_size set to 64 bytes
[??? 0.469056] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[??? 0.469057] e820: reserve RAM buffer [mem 0xdf66d800-0xdfffffff]
[??? 0.469213] NetLabel: Initializing
[??? 0.469214] NetLabel:? domain hash size = 128
[??? 0.469215] NetLabel:? protocols = UNLABELED CIPSOv4 CALIPSO
[??? 0.469237] NetLabel:? unlabeled traffic allowed by default
[??? 0.474041] hpet: 3 channels of 0 reserved for per-cpu timers
[??? 0.474046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[??? 0.474050] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[??? 0.476414] clocksource: Switched to clocksource tsc-early
[??? 0.496403] *** VALIDATE bpf ***
[??? 0.496537] VFS: Disk quotas dquot_6.6.0
[??? 0.496562] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[??? 0.496607] *** VALIDATE ramfs ***
[??? 0.496611] *** VALIDATE hugetlbfs ***
[??? 0.496769] AppArmor: AppArmor Filesystem Enabled
[??? 0.496821] pnp: PnP ACPI init
[??? 0.496965] pnp 00:00: Plug and Play ACPI device, IDs PNP0f13 (active)
[??? 0.497021] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[??? 0.497065] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[??? 0.497166] system 00:03: [io? 0x0c80-0x0cff] could not be reserved
[??? 0.497172] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[??? 0.497283] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[??? 0.497289] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[??? 0.497486] pnp 00:05: disabling [io? 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io? 0x1000-0x107f]
[??? 0.497489] pnp 00:05: disabling [io? 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io? 0x1000-0x107f]
[??? 0.497520] system 00:05: [io? 0x0900-0x097f] has been reserved
[??? 0.497523] system 00:05: [io? 0x04d0-0x04d1] has been reserved
[??? 0.497528] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[??? 0.497563] pnp 00:06: disabling [io? 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io? 0x1000-0x107f]
[??? 0.497566] pnp 00:06: disabling [io? 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io? 0x1000-0x107f]
[??? 0.497568] pnp 00:06: disabling [io? 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io? 0x1000-0x107f]
[??? 0.497570] pnp 00:06: disabling [io? 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io? 0x1000-0x107f]
[??? 0.497600] system 00:06: [io? 0xf400-0xf4fe] has been reserved
[??? 0.497603] system 00:06: [io? 0x1080-0x10bf] has been reserved
[??? 0.497605] system 00:06: [io? 0x10c0-0x10df] has been reserved
[??? 0.497610] system 00:06: [io? 0x0809] has been reserved
[??? 0.497616] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[??? 0.515021] system 00:07: [mem 0x00000000-0x0009efff] could not be reserved
[??? 0.515023] system 00:07: [mem 0x0009f000-0x0009ffff] could not be reserved
[??? 0.515025] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[??? 0.515027] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[??? 0.515029] system 00:07: [mem 0x00100000-0xdf66d7ff] could not be reserved
[??? 0.515031] system 00:07: [mem 0xdf66d800-0xdf6fffff] has been reserved
[??? 0.515033] system 00:07: [mem 0xdf700000-0xdf7fffff] has been reserved
[??? 0.515035] system 00:07: [mem 0xdf700000-0xdfefffff] could not be reserved
[??? 0.515037] system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
[??? 0.515039] system 00:07: [mem 0xffa00000-0xffbfffff] has been reserved
[??? 0.515041] system 00:07: [mem 0xfec00000-0xfec0ffff] could not be reserved
[??? 0.515043] system 00:07: [mem 0xfee00000-0xfee0ffff] has been reserved
[??? 0.515045] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[??? 0.515047] system 00:07: [mem 0xfeda0000-0xfeda3fff] has been reserved
[??? 0.515049] system 00:07: [mem 0xfeda4000-0xfeda4fff] has been reserved
[??? 0.515051] system 00:07: [mem 0xfeda5000-0xfeda5fff] has been reserved
[??? 0.515053] system 00:07: [mem 0xfeda6000-0xfeda6fff] has been reserved
[??? 0.515055] system 00:07: [mem 0xfed18000-0xfed1bfff] has been reserved
[??? 0.515057] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[??? 0.515063] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[??? 0.515151] pnp: PnP ACPI: found 8 devices
[??? 0.517283] thermal_sys: Registered thermal governor 'fair_share'
[??? 0.517284] thermal_sys: Registered thermal governor 'bang_bang'
[??? 0.517285] thermal_sys: Registered thermal governor 'step_wise'
[??? 0.517286] thermal_sys: Registered thermal governor 'user_space'
[??? 0.517287] thermal_sys: Registered thermal governor 'power_allocator'
[??? 0.521800] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[??? 0.521850] pci 0000:00:1c.0: bridge window [io? 0x1000-0x0fff] to [bus 0b] add_size 1000
[??? 0.521853] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[??? 0.521856] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[??? 0.521859] pci 0000:00:1c.1: bridge window [io? 0x1000-0x0fff] to [bus 0c] add_size 1000
[??? 0.521861] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[??? 0.521864] pci 0000:00:1c.5: bridge window [io? 0x1000-0x0fff] to [bus 09] add_size 1000
[??? 0.521866] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[??? 0.521878] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
[??? 0.521884] pci 0000:00:1c.0: BAR 15: assigned [mem 0x120000000-0x1201fffff 64bit pref]
[??? 0.521890] pci 0000:00:1c.1: BAR 15: assigned [mem 0x120200000-0x1203fffff 64bit pref]
[??? 0.521895] pci 0000:00:1c.5: BAR 15: assigned [mem 0x120400000-0x1205fffff 64bit pref]
[??? 0.521898] pci 0000:00:1c.0: BAR 13: assigned [io? 0x2000-0x2fff]
[??? 0.521901] pci 0000:00:1c.1: BAR 13: assigned [io? 0x3000-0x3fff]
[??? 0.521903] pci 0000:00:1c.5: BAR 13: assigned [io? 0x4000-0x4fff]
[??? 0.521906] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[??? 0.521910] pci 0000:00:1c.0:?? bridge window [io? 0x2000-0x2fff]
[??? 0.521916] pci 0000:00:1c.0:?? bridge window [mem 0xf0200000-0xf03fffff]
[??? 0.521921] pci 0000:00:1c.0:?? bridge window [mem 0x120000000-0x1201fffff 64bit pref]
[??? 0.521929] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[??? 0.521932] pci 0000:00:1c.1:?? bridge window [io? 0x3000-0x3fff]
[??? 0.521938] pci 0000:00:1c.1:?? bridge window [mem 0xf6c00000-0xf6cfffff]
[??? 0.521942] pci 0000:00:1c.1:?? bridge window [mem 0x120200000-0x1203fffff 64bit pref]
[??? 0.521950] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[??? 0.521952] pci 0000:00:1c.3:?? bridge window [io? 0xd000-0xdfff]
[??? 0.521958] pci 0000:00:1c.3:?? bridge window [mem 0xf6a00000-0xf6bfffff]
[??? 0.521963] pci 0000:00:1c.3:?? bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[??? 0.521970] pci 0000:00:1c.5: PCI bridge to [bus 09]
[??? 0.521973] pci 0000:00:1c.5:?? bridge window [io? 0x4000-0x4fff]
[??? 0.521979] pci 0000:00:1c.5:?? bridge window [mem 0xf6900000-0xf69fffff]
[??? 0.521983] pci 0000:00:1c.5:?? bridge window [mem 0x120400000-0x1205fffff 64bit pref]
[??? 0.521991] pci 0000:00:1e.0: PCI bridge to [bus 03]
[??? 0.521997] pci 0000:00:1e.0:?? bridge window [mem 0xf6800000-0xf68fffff]
[??? 0.522008] pci_bus 0000:00: resource 4 [io? 0x0000-0x0cf7 window]
[??? 0.522010] pci_bus 0000:00: resource 5 [io? 0x0d00-0xffff window]
[??? 0.522011] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[??? 0.522013] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[??? 0.522015] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window]
[??? 0.522016] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff window]
[??? 0.522018] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff window]
[??? 0.522020] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[??? 0.522021] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff window]
[??? 0.522023] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff window]
[??? 0.522024] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff window]
[??? 0.522026] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff window]
[??? 0.522028] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff window]
[??? 0.522029] pci_bus 0000:0b: resource 0 [io? 0x2000-0x2fff]
[??? 0.522031] pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf03fffff]
[??? 0.522033] pci_bus 0000:0b: resource 2 [mem 0x120000000-0x1201fffff 64bit pref]
[??? 0.522034] pci_bus 0000:0c: resource 0 [io? 0x3000-0x3fff]
[??? 0.522036] pci_bus 0000:0c: resource 1 [mem 0xf6c00000-0xf6cfffff]
[??? 0.522038] pci_bus 0000:0c: resource 2 [mem 0x120200000-0x1203fffff 64bit pref]
[??? 0.522039] pci_bus 0000:0d: resource 0 [io? 0xd000-0xdfff]
[??? 0.522041] pci_bus 0000:0d: resource 1 [mem 0xf6a00000-0xf6bfffff]
[??? 0.522043] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[??? 0.522044] pci_bus 0000:09: resource 0 [io? 0x4000-0x4fff]
[??? 0.522046] pci_bus 0000:09: resource 1 [mem 0xf6900000-0xf69fffff]
[??? 0.522047] pci_bus 0000:09: resource 2 [mem 0x120400000-0x1205fffff 64bit pref]
[??? 0.522049] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf68fffff]
[??? 0.522051] pci_bus 0000:03: resource 4 [io? 0x0000-0x0cf7 window]
[??? 0.522052] pci_bus 0000:03: resource 5 [io? 0x0d00-0xffff window]
[??? 0.522054] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[??? 0.522056] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[??? 0.522057] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff window]
[??? 0.522059] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff window]
[??? 0.522060] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff window]
[??? 0.522062] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff window]
[??? 0.522064] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff window]
[??? 0.522065] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff window]
[??? 0.522067] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff window]
[??? 0.522068] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff window]
[??? 0.522070] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff window]
[??? 0.522203] NET: Registered protocol family 2
[??? 0.522417] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[??? 0.523222] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[??? 0.523324] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[??? 0.523549] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[??? 0.523624] TCP: Hash tables configured (established 32768 bind 32768)
[??? 0.523719] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[??? 0.523756] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[??? 0.523815] NET: Registered protocol family 1
[??? 0.523822] NET: Registered protocol family 44
[??? 0.523838] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[??? 0.526535] PCI: CLS 64 bytes, default 64
[??? 0.526615] Trying to unpack rootfs image as initramfs...
[??? 1.065352] Freeing initrd memory: 87184K
[??? 1.065438] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[??? 1.065440] software IO TLB: mapped [mem 0xdb66d000-0xdf66d000] (64MB)
[??? 1.065653] check: Scanning for low memory corruption every 60 seconds
[??? 1.066243] Initialise system trusted keyrings
[??? 1.066259] Key type blacklist registered
[??? 1.066352] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[??? 1.068547] zbud: loaded
[??? 1.069101] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[??? 1.069367] fuse: init (API version 7.31)
[??? 1.069394] *** VALIDATE fuse ***
[??? 1.069396] *** VALIDATE fuse ***
[??? 1.069541] Platform Keyring initialized
[??? 1.073561] Key type asymmetric registered
[??? 1.073564] Asymmetric key parser 'x509' registered
[??? 1.073578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[??? 1.073628] io scheduler mq-deadline registered
[??? 1.074882] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[??? 1.074953] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[??? 1.074954] vesafb: scrolling: redraw
[??? 1.074955] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[??? 1.074983] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[??? 1.075040] fbcon: Deferring console take-over
[??? 1.075041] fb0: VESA VGA frame buffer device
[??? 1.075058] intel_idle: does not run on family 6 model 23
[??? 1.075263] ACPI: AC Adapter [AC] (on-line)
[??? 1.075339] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[??? 1.075393] ACPI: Lid Switch [LID]
[??? 1.075438] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[??? 1.075473] ACPI: Power Button [PBTN]
[??? 1.075516] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[??? 1.075544] ACPI: Sleep Button [SBTN]
[??? 1.075692] Monitor-Mwait will be used to enter C-1 state
[??? 1.075696] Monitor-Mwait will be used to enter C-2 state
[??? 1.075699] Monitor-Mwait will be used to enter C-3 state
[??? 1.075703] tsc: Marking TSC unstable due to TSC halts in idle
[??? 1.075780] clocksource: Switched to clocksource hpet
[??? 1.083939] thermal LNXTHERM:00: registered as thermal_zone0
[??? 1.083941] ACPI: Thermal Zone [THM] (28 C)
[??? 1.084103] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[??? 1.093653] Linux agpgart interface v0.103
[??? 1.114263] battery: ACPI: Battery Slot [BAT0] (battery present)
[??? 1.300684] loop: module loaded
[??? 1.300971] ata_piix 0000:00:1f.1: version 2.13
[??? 1.302093] scsi host0: ata_piix
[??? 1.302322] scsi host1: ata_piix
[??? 1.302375] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[??? 1.302376] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[??? 1.302509] libphy: Fixed MDIO Bus: probed
[??? 1.302510] tun: Universal TUN/TAP device driver, 1.6
[??? 1.302552] ata2: port disabled--ignoring
[??? 1.302571] PPP generic driver version 2.4.2
[??? 1.302673] VFIO - User Level meta-driver version: 0.3
[??? 1.302760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[??? 1.302767] ehci-pci: EHCI PCI platform driver
[??? 1.303004] ehci-pci 0000:00:1a.7: EHCI Host Controller
[??? 1.303011] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[??? 1.303027] ehci-pci 0000:00:1a.7: debug port 1
[??? 1.306964] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[??? 1.306977] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfed1c400
[??? 1.320623] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[??? 1.320720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[??? 1.320724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.320727] usb usb1: Product: EHCI Host Controller
[??? 1.320730] usb usb1: Manufacturer: Linux 5.4.0-100-generic ehci_hcd
[??? 1.320733] usb usb1: SerialNumber: 0000:00:1a.7
[??? 1.320933] hub 1-0:1.0: USB hub found
[??? 1.320941] hub 1-0:1.0: 4 ports detected
[??? 1.321350] ehci-pci 0000:00:1d.7: EHCI Host Controller
[??? 1.321356] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[??? 1.321369] ehci-pci 0000:00:1d.7: debug port 1
[??? 1.325275] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[??? 1.325289] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfed1c000
[??? 1.344820] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[??? 1.344910] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[??? 1.344912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.344913] usb usb2: Product: EHCI Host Controller
[??? 1.344915] usb usb2: Manufacturer: Linux 5.4.0-100-generic ehci_hcd
[??? 1.344916] usb usb2: SerialNumber: 0000:00:1d.7
[??? 1.345053] hub 2-0:1.0: USB hub found
[??? 1.345060] hub 2-0:1.0: 6 ports detected
[??? 1.345327] ehci-platform: EHCI generic platform driver
[??? 1.345343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[??? 1.345346] ohci-pci: OHCI PCI platform driver
[??? 1.345359] ohci-platform: OHCI generic platform driver
[??? 1.345367] uhci_hcd: USB Universal Host Controller Interface driver
[??? 1.345576] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[??? 1.345582] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[??? 1.345590] uhci_hcd 0000:00:1a.0: detected 2 ports
[??? 1.345610] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[??? 1.345681] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[??? 1.345683] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.345684] usb usb3: Product: UHCI Host Controller
[??? 1.345686] usb usb3: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[??? 1.345687] usb usb3: SerialNumber: 0000:00:1a.0
[??? 1.345844] hub 3-0:1.0: USB hub found
[??? 1.345852] hub 3-0:1.0: 2 ports detected
[??? 1.346196] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[??? 1.346205] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[??? 1.346225] uhci_hcd 0000:00:1a.1: detected 2 ports
[??? 1.346253] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[??? 1.346309] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[??? 1.346311] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.346312] usb usb4: Product: UHCI Host Controller
[??? 1.346314] usb usb4: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[??? 1.346315] usb usb4: SerialNumber: 0000:00:1a.1
[??? 1.346455] hub 4-0:1.0: USB hub found
[??? 1.346463] hub 4-0:1.0: 2 ports detected
[??? 1.346780] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[??? 1.346786] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[??? 1.346793] uhci_hcd 0000:00:1d.0: detected 2 ports
[??? 1.346813] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[??? 1.346869] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[??? 1.346871] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.346873] usb usb5: Product: UHCI Host Controller
[??? 1.346874] usb usb5: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[??? 1.346876] usb usb5: SerialNumber: 0000:00:1d.0
[??? 1.347014] hub 5-0:1.0: USB hub found
[??? 1.347021] hub 5-0:1.0: 2 ports detected
[??? 1.347341] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[??? 1.347347] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[??? 1.347354] uhci_hcd 0000:00:1d.1: detected 2 ports
[??? 1.347374] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[??? 1.347429] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[??? 1.347431] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.347433] usb usb6: Product: UHCI Host Controller
[??? 1.347434] usb usb6: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[??? 1.347435] usb usb6: SerialNumber: 0000:00:1d.1
[??? 1.347576] hub 6-0:1.0: USB hub found
[??? 1.347584] hub 6-0:1.0: 2 ports detected
[??? 1.347903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[??? 1.347909] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[??? 1.347916] uhci_hcd 0000:00:1d.2: detected 2 ports
[??? 1.347937] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[??? 1.348008] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[??? 1.348010] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[??? 1.348012] usb usb7: Product: UHCI Host Controller
[??? 1.348013] usb usb7: Manufacturer: Linux 5.4.0-100-generic uhci_hcd
[??? 1.348015] usb usb7: SerialNumber: 0000:00:1d.2
[??? 1.348147] hub 7-0:1.0: USB hub found
[??? 1.348155] hub 7-0:1.0: 2 ports detected
[??? 1.348375] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[??? 1.351294] serio: i8042 KBD port at 0x60,0x64 irq 1
[??? 1.351299] serio: i8042 AUX port at 0x60,0x64 irq 12
[??? 1.351486] mousedev: PS/2 mouse device common for all mice
[??? 1.351756] rtc_cmos 00:02: RTC can wake from S4
[??? 1.352033] rtc_cmos 00:02: registered as rtc0
[??? 1.352056] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[??? 1.352065] i2c /dev entries driver
[??? 1.352129] device-mapper: uevent: version 1.0.3
[??? 1.352218] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@...
[??? 1.352245] platform eisa.0: Probing EISA bus 0
[??? 1.352248] platform eisa.0: EISA: Cannot allocate resource for mainboard
[??? 1.352250] platform eisa.0: Cannot allocate resource for EISA slot 1
[??? 1.352251] platform eisa.0: Cannot allocate resource for EISA slot 2
[??? 1.352253] platform eisa.0: Cannot allocate resource for EISA slot 3
[??? 1.352254] platform eisa.0: Cannot allocate resource for EISA slot 4
[??? 1.352256] platform eisa.0: Cannot allocate resource for EISA slot 5
[??? 1.352258] platform eisa.0: Cannot allocate resource for EISA slot 6
[??? 1.352259] platform eisa.0: Cannot allocate resource for EISA slot 7
[??? 1.352261] platform eisa.0: Cannot allocate resource for EISA slot 8
[??? 1.352262] platform eisa.0: EISA: Detected 0 cards
[??? 1.352266] intel_pstate: CPU model not supported
[??? 1.352309] ledtrig-cpu: registered to indicate activity on CPUs
[??? 1.352409] drop_monitor: Initializing network drop monitor service
[??? 1.352663] NET: Registered protocol family 10
[??? 1.354636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[??? 1.362094] Segment Routing with IPv6
[??? 1.362131] NET: Registered protocol family 17
[??? 1.362199] Key type dns_resolver registered
[??? 1.362447] RAS: Correctable Errors collector initialized.
[??? 1.362497] microcode: sig=0x10676, pf=0x80, revision=0x60f
[??? 1.362562] microcode: Microcode Update Driver: v2.2.
[??? 1.362568] IPI shorthand broadcast: enabled
[??? 1.362651] registered taskstats version 1
[??? 1.362665] Loading compiled-in X.509 certificates
[??? 1.363890] Loaded X.509 cert 'Build time autogenerated kernel key: e1b319a0371e066477db7ea429c6076e950e5e49'
[??? 1.364989] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[??? 1.366057] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[??? 1.366058] blacklist: Loading compiled-in revocation X.509 certificates
[??? 1.366084] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[??? 1.366121] zswap: loaded using pool lzo/zbud
[??? 1.366269] Key type ._fscrypt registered
[??? 1.366270] Key type .fscrypt registered
[??? 1.374772] Key type big_key registered
[??? 1.378994] Key type encrypted registered
[??? 1.378999] AppArmor: AppArmor sha1 policy hashing enabled
[??? 1.379008] ima: No TPM chip found, activating TPM-bypass!
[??? 1.379015] ima: Allocated hash algorithm: sha1
[??? 1.379024] ima: No architecture policies found
[??? 1.379040] evm: Initialising EVM extended attributes:
[??? 1.379041] evm: security.selinux
[??? 1.379042] evm: security.SMACK64
[??? 1.379043] evm: security.SMACK64EXEC
[??? 1.379043] evm: security.SMACK64TRANSMUTE
[??? 1.379044] evm: security.SMACK64MMAP
[??? 1.379044] evm: security.apparmor
[??? 1.379045] evm: security.ima
[??? 1.379046] evm: security.capability
[??? 1.379047] evm: HMAC attrs: 0x1
[??? 1.379626] PM:?? Magic number: 10:129:349
[??? 1.379813] rtc_cmos 00:02: setting system clock to 2022-02-22T21:18:36 UTC (1645564716)
[??? 1.380987] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[??? 1.481197] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GSA-S10N, A103, max UDMA/33
[??? 1.509416] scsi 0:0:0:0: CD-ROM??????????? HL-DT-ST DVD+-RW GSA-S10N A103 PQ: 0 ANSI: 5
[??? 1.575354] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[??? 1.575357] cdrom: Uniform CD-ROM driver Revision: 3.20
[??? 1.576767] random: fast init done
[??? 1.596867] sr 0:0:0:0: Attached scsi CD-ROM sr0
[??? 1.596976] sr 0:0:0:0: Attached scsi generic sg0 type 5
[??? 1.598979] Freeing unused decrypted memory: 2040K
[??? 1.600427] Freeing unused kernel image memory: 2752K
[??? 1.612802] Write protecting the kernel read-only data: 26624k
[??? 1.614258] Freeing unused kernel image memory: 2008K
[??? 1.614772] Freeing unused kernel image memory: 740K
[??? 1.629015] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[??? 1.629049] x86/mm: Checking user space page tables
[??? 1.643062] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[??? 1.643069] Run /init as init process
[??? 1.659692] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[??? 1.660944] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[??? 1.660957] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[??? 1.781879] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[??? 1.795694] tg3.c:v3.137 (May 11, 2014)
[??? 1.804619] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[??? 1.805748] sdhci: Secure Digital Host Controller Interface driver
[??? 1.805749] sdhci: Copyright(c) Pierre Ossman
[??? 1.816876] tg3 0000:09:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1d:09:61:d4:32
[??? 1.816881] tg3 0000:09:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[??? 1.816883] tg3 0000:09:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[??? 1.816885] tg3 0000:09:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[??? 1.818776] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[??? 1.818960] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[??? 1.823164] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[??? 1.842053] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[??? 1.851502] ahci 0000:00:1f.2: version 3.0
[??? 1.851903] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[??? 1.851906] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[??? 1.864349] pci 0000:00:00.0: Intel 965GM Chipset
[??? 1.864368] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[??? 1.865118] pci 0000:00:00.0: detected 8192K stolen memory
[??? 1.865188] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[??? 1.865190] fb0: switching to inteldrmfb from VESA VGA
[??? 1.865315] i915 0000:00:02.0: vgaarb: deactivate vga console
[??? 1.868212] scsi host2: ahci
[??? 1.904746] firewire_ohci 0000:03:01.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[??? 1.906086] scsi host3: ahci
[??? 1.907219] scsi host4: ahci
[??? 1.907313] ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb900 irq 24
[??? 1.907315] ata4: DUMMY
[??? 1.907318] ata5: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfba00 irq 24
[??? 1.933713] tg3 0000:09:00.0 enp9s0: renamed from eth0
[??? 1.937145] gpio_ich gpio_ich.2.auto: GPIO from 462 to 511
[??? 1.938172] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[??? 1.938174] [drm] Driver supports precise vblank timestamp query.
[??? 2.002814] usb 7-1: New USB device found, idVendor=0483, idProduct=2016, bcdDevice= 0.01
[??? 2.002816] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[??? 2.002818] usb 7-1: Product: Biometric Coprocessor
[??? 2.002820] usb 7-1: Manufacturer: STMicroelectronics
[??? 2.219307] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[??? 2.223309] ata5: SATA link down (SStatus 0 SControl 300)
[??? 2.230889] ata3.00: ATA-8: TOSHIBA THNSNS128GCSP, TA4ABBF0, max UDMA/133
[??? 2.230891] ata3.00: 250069680 sectors, multi 8: LBA48 NCQ (depth 32), AA
[??? 2.240902] ata3.00: configured for UDMA/133
[??? 2.241092] scsi 2:0:0:0: Direct-Access???? ATA????? TOSHIBA THNSNS12 BBF0 PQ: 0 ANSI: 5
[??? 2.241312] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[??? 2.241531] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[??? 2.241551] sd 2:0:0:0: [sda] Write Protect is off
[??? 2.241553] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[??? 2.241587] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[??? 2.278216] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[??? 2.281523]? sda: sda1 sda2 sda3 < sda5 >
[??? 2.304868] sd 2:0:0:0: [sda] Attached SCSI disk
[??? 2.409451] [drm] RC6 disabled, disabling runtime PM support
[??? 2.409645] [drm] Initialized overlay support.
[??? 2.410261] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[??? 2.410567] ACPI: Video Device [VID1] (multi-head: yes? rom: no? post: no)
[??? 2.420834] firewire_core 0000:03:01.0: created device fw0: GUID 434fc000010f1090, S400
[??? 2.431502] acpi device:34: registered as cooling_device2
[??? 2.441585] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input6
[??? 2.441683] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[??? 2.458207] fbcon: i915drmfb (fb0) is primary device
[??? 2.458208] fbcon: Deferring console take-over
[??? 2.458213] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[??? 2.502518] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0/0x0, board id: 0, fw id: 436373
[??? 2.504813] usb 2-6: new high-speed USB device number 3 using ehci-pci
[??? 2.536888] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[??? 2.669972] usb 2-6: New USB device found, idVendor=05a9, idProduct=2640, bcdDevice= 1.00
[??? 2.669977] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[??? 2.669980] usb 2-6: Product: Laptop Integrated Webcam
[??? 2.669983] usb 2-6: Manufacturer: OmniVision Technologies, Inc. -2640-08.05.12.1
[??? 3.544598] raid6: sse2x4?? gen()? 7580 MB/s
[??? 3.592598] raid6: sse2x4?? xor()? 5685 MB/s
[??? 3.640599] raid6: sse2x2?? gen()? 4226 MB/s
[??? 3.688600] raid6: sse2x2?? xor()? 5209 MB/s
[??? 3.736606] raid6: sse2x1?? gen()? 3772 MB/s
[??? 3.784598] raid6: sse2x1?? xor()? 4266 MB/s
[??? 3.784599] raid6: using algorithm sse2x4 gen() 7580 MB/s
[??? 3.784600] raid6: .... xor() 5685 MB/s, rmw enabled
[??? 3.784601] raid6: using ssse3x2 recovery algorithm
[??? 3.788727] xor: measuring software checksum speed
[??? 3.828595]??? prefetch64-sse: 12341.000 MB/sec
[??? 3.868594]??? generic_sse: 10687.000 MB/sec
[??? 3.868596] xor: using function: prefetch64-sse (12341.000 MB/sec)
[??? 3.897146] Btrfs loaded, crc32c=crc32c-generic
[??? 4.051529] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[??? 4.290719] systemd[1]: Inserted module 'autofs4'
[??? 4.315514] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[??? 4.336921] systemd[1]: Detected architecture x86-64.
[??? 4.353513] systemd[1]: Set hostname to <reale-XPS-M1330>.
[??? 4.748192] systemd[1]: Created slice system-modprobe.slice.
[??? 4.748773] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[??? 4.749216] systemd[1]: Created slice User and Session Slice.
[??? 4.749315] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[??? 4.749604] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[??? 4.749688] systemd[1]: Reached target User and Group Name Lookups.
[??? 4.749725] systemd[1]: Reached target Remote File Systems.
[??? 4.749753] systemd[1]: Reached target Slices.
[??? 4.749878] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[??? 4.750042] systemd[1]: Listening on LVM2 poll daemon socket.
[??? 4.751895] systemd[1]: Listening on Process Core Dump Socket.
[??? 4.752023] systemd[1]: Listening on fsck to fsckd communication Socket.
[??? 4.752113] systemd[1]: Listening on initctl Compatibility Named Pipe.
[??? 4.753388] systemd[1]: Listening on Journal Audit Socket.
[??? 4.753589] systemd[1]: Listening on Journal Socket (/dev/log).
[??? 4.753771] systemd[1]: Listening on Journal Socket.
[??? 4.753931] systemd[1]: Listening on udev Control Socket.
[??? 4.754061] systemd[1]: Listening on udev Kernel Socket.
[??? 4.755736] systemd[1]: Mounting Huge Pages File System...
[??? 4.757649] systemd[1]: Mounting POSIX Message Queue File System...
[??? 4.759851] systemd[1]: Mounting Kernel Debug File System...
[??? 4.761909] systemd[1]: Mounting Kernel Trace File System...
[??? 4.764539] systemd[1]: Starting Journal Service...
[??? 4.766960] systemd[1]: Starting Availability of block devices...
[??? 4.772654] systemd[1]: Starting Set the console keyboard layout...
[??? 4.775828] systemd[1]: Starting Create list of static device nodes for the current kernel...
[??? 4.778379] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[??? 4.778481] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[??? 4.779894] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[??? 4.779965] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[??? 4.782950] systemd[1]: Starting Load Kernel Modules...
[??? 4.786491] systemd[1]: Starting Remount Root and Kernel File Systems...
[??? 4.789630] systemd[1]: Starting udev Coldplug all Devices...
[??? 4.794603] systemd[1]: Starting Uncomplicated firewall...
[??? 4.797885] systemd[1]: Mounted Huge Pages File System.
[??? 4.798181] systemd[1]: Mounted POSIX Message Queue File System.
[??? 4.798406] systemd[1]: Mounted Kernel Debug File System.
[??? 4.798626] systemd[1]: Mounted Kernel Trace File System.
[??? 4.799631] systemd[1]: Finished Availability of block devices.
[??? 4.803864] systemd[1]: Finished Create list of static device nodes for the current kernel.
[??? 4.806360] systemd[1]: Finished Uncomplicated firewall.
[??? 4.822853] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[??? 4.826615] systemd[1]: Finished Remount Root and Kernel File Systems.
[??? 4.828394] systemd[1]: Activating swap /swapfile...
[??? 4.829952] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[??? 4.830078] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[??? 4.831830] systemd[1]: Starting Load/Save Random Seed...
[??? 4.833991] systemd[1]: Starting Create System Users...
[??? 4.860196] systemd[1]: Finished Load/Save Random Seed.
[??? 4.884263] systemd[1]: Finished Create System Users.
[??? 4.887192] systemd[1]: Starting Create Static Device Nodes in /dev...
[??? 4.889991] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[??? 4.891665] lp: driver loaded but no devices found
[??? 4.908084] ppdev: user-space parallel port driver
[??? 4.922768] systemd[1]: Finished Load Kernel Modules.
[??? 4.925609] systemd[1]: Mounting FUSE Control File System...
[??? 4.928802] systemd[1]: Mounting Kernel Configuration File System...
[??? 4.933022] systemd[1]: Starting Apply Kernel Variables...
[??? 4.941590] systemd[1]: Finished Create Static Device Nodes in /dev.
[??? 4.945107] systemd[1]: Mounted FUSE Control File System.
[??? 4.946020] systemd[1]: Mounted Kernel Configuration File System.
[??? 4.948451] systemd[1]: Starting udev Kernel Device Manager...
[??? 4.970529] systemd[1]: Finished Apply Kernel Variables.
[??? 5.155788] systemd[1]: Finished udev Coldplug all Devices.
[??? 5.157765] Adding 2097148k swap on /swapfile.? Priority:-2 extents:6 across:2260988k SSFS
[??? 5.157993] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[??? 5.158128] systemd[1]: Activated swap /swapfile.
[??? 5.158283] systemd[1]: Reached target Swap.
[??? 5.165245] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[??? 5.170845] systemd[1]: Started udev Kernel Device Manager.
[??? 5.190245] systemd[1]: Finished Set the console keyboard layout.
[??? 5.190582] systemd[1]: Reached target Local File Systems (Pre).
[??? 5.192292] systemd[1]: Starting Show Plymouth Boot Screen...
[??? 5.213452] systemd[1]: plymouth-start.service: Succeeded.
[??? 5.214317] systemd[1]: Started Show Plymouth Boot Screen.
[??? 5.214615] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[??? 5.214822] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[??? 5.214866] systemd[1]: Reached target Local Encrypted Volumes.
[??? 5.261151] systemd[1]: Started Journal Service.
[??? 5.273413] systemd-journald[293]: Received client request to flush runtime journal.
[??? 6.328688] r592: driver successfully loaded
[??? 6.437320] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[??? 6.468402] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[??? 6.508133] mc: Linux media interface: v0.10
[??? 6.510976] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[??? 6.511116] r852: driver loaded successfully
[??? 6.552953] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[??? 6.578109] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
[??? 6.639154] wl: loading out-of-tree module taints kernel.
[??? 6.639161] wl: module license 'MIXED/Proprietary' taints kernel.
[??? 6.639162] Disabling lock debugging due to kernel taint
[??? 6.659094] videodev: Linux video capture interface: v2.00
[??? 6.728058] wl: module verification failed: signature and/or required key missing - tainting kernel
[??? 6.752281] kvm: disabled by bios
[??? 6.792874] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[??? 6.806472] input: Laptop Integrated Webcam: Lapto as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input8
[??? 6.806798] usbcore: registered new interface driver uvcvideo
[??? 6.806799] USB Video Class driver (1.1.1)
[??? 6.815322] kvm: disabled by bios
[??? 6.843789] intel_powerclamp: No package C-state available
[??? 7.185972] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[??? 7.217179] intel_powerclamp: No package C-state available
[??? 7.334943] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9228: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[??? 7.334946] snd_hda_codec_idt hdaudioC0D0:??? speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[??? 7.334948] snd_hda_codec_idt hdaudioC0D0:??? hp_outs=2 (0xf/0xa/0x0/0x0/0x0)
[??? 7.334950] snd_hda_codec_idt hdaudioC0D0:??? mono: mono_out=0x0
[??? 7.334951] snd_hda_codec_idt hdaudioC0D0:??? dig-out=0x21/0x0
[??? 7.334953] snd_hda_codec_idt hdaudioC0D0:??? inputs:
[??? 7.334955] snd_hda_codec_idt hdaudioC0D0:????? Internal Mic=0x13
[??? 7.334957] snd_hda_codec_idt hdaudioC0D0:????? Mic=0xe
[??? 7.410297] wl 0000:0c:00.0 wlp12s0: renamed from wlan0
[??? 7.658978] audit: type=1400 audit(1645564722.776:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=515 comm="apparmor_parser"
[??? 7.671653] audit: type=1400 audit(1645564722.788:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=516 comm="apparmor_parser"
[??? 7.682853] audit: type=1400 audit(1645564722.800:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=519 comm="apparmor_parser"
[??? 7.682858] audit: type=1400 audit(1645564722.800:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=519 comm="apparmor_parser"
[??? 7.682861] audit: type=1400 audit(1645564722.800:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=519 comm="apparmor_parser"
[??? 7.685491] audit: type=1400 audit(1645564722.804:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=521 comm="apparmor_parser"
[??? 7.685496] audit: type=1400 audit(1645564722.804:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=521 comm="apparmor_parser"
[??? 7.704647] audit: type=1400 audit(1645564722.820:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=522 comm="apparmor_parser"
[??? 7.713966] audit: type=1400 audit(1645564722.832:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=524 comm="apparmor_parser"
[??? 7.732428] audit: type=1400 audit(1645564722.848:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=525 comm="apparmor_parser"
[??? 8.509483] input: HDA Intel Front Headphone Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[??? 8.509572] input: HDA Intel Front Headphone Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[??? 8.509646] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[?? 10.170838] IPv6: ADDRCONF(NETDEV_CHANGE): wlp12s0: link becomes ready
[?? 16.741713] random: crng init done
[?? 16.741716] random: 7 urandom warning(s) missed due to ratelimiting
[?? 73.772862] usb 2-1: new high-speed USB device number 4 using ehci-pci
[?? 73.941490] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00
[?? 73.941496] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[?? 73.941499] usb 2-1: Product: USB 2.0 Hub [MTT]
[?? 73.942055] hub 2-1:1.0: USB hub found
[?? 73.942217] hub 2-1:1.0: 7 ports detected
[?? 74.248714] usb 2-1.6: new low-speed USB device number 5 using ehci-pci
[?? 74.382141] usb 2-1.6: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[?? 74.382149] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[?? 74.382154] usb 2-1.6: Product: Usb Mouse
[?? 74.382159] usb 2-1.6: Manufacturer: SIGMACHIP
[?? 74.410318] hidraw: raw HID events driver (C) Jiri Kosina
[?? 74.418041] usbcore: registered new interface driver usbhid
[?? 74.418043] usbhid: USB HID core driver
[?? 74.434747] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.6/2-1.6:1.0/0003:1C4F:0034.0001/input/input12
[?? 74.493350] hid-generic 0003:1C4F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.7-1.6/input0
[? 149.448820] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[? 149.647997] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[? 149.648005] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[? 149.648010] usb 5-2: Product: CDC-ACM Demo
[? 149.648015] usb 5-2: Manufacturer: Black Sphere Technologies
[? 149.648019] usb 5-2: SerialNumber: DEMO
[? 149.783924] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[? 149.786530] usbcore: registered new interface driver cdc_acm
[? 149.786532] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[? 218.029121] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[? 247.589311] perf: interrupt took too long (3162 > 3148), lowering kernel.perf_event_max_sample_rate to 63250
[? 253.882243] TCP: wlp12s0: Driver has suspect GRO implementation, TCP performance may be compromised.
[? 331.665055] usb 5-2: USB disconnect, device number 2
[? 367.948787] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[? 368.345843] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[? 368.345851] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[? 368.345857] usb 5-2: Product: CDC-ACM Demo
[? 368.345862] usb 5-2: Manufacturer: Black Sphere Technologies
[? 368.345866] usb 5-2: SerialNumber: DEMO
[? 368.347924] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[? 410.536678] usb 2-1: USB disconnect, device number 4
[? 410.536687] usb 2-1.6: USB disconnect, device number 5
[? 414.768694] usb 5-1: new low-speed USB device number 4 using uhci_hcd
[? 414.961970] usb 5-1: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[? 414.961976] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[? 414.961979] usb 5-1: Product: Usb Mouse
[? 414.961982] usb 5-1: Manufacturer: SIGMACHIP
[? 414.978594] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:1C4F:0034.0002/input/input13
[? 414.978833] hid-generic 0003:1C4F:0034.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-1/input0
[? 443.452600] perf: interrupt took too long (3955 > 3952), lowering kernel.perf_event_max_sample_rate to 50500
[? 729.727604] perf: interrupt took too long (4944 > 4943), lowering kernel.perf_event_max_sample_rate to 40250
[ 1022.344830] usb 5-2: USB disconnect, device number 3
[ 1026.836697] usb 5-2: new full-speed USB device number 5 using uhci_hcd
[ 1026.972665] usb 5-2: device descriptor read/64, error -71
[ 1027.216670] usb 5-2: device descriptor read/64, error -71
[ 1027.452667] usb 5-2: new full-speed USB device number 6 using uhci_hcd
[ 1027.588657] usb 5-2: device descriptor read/64, error -71
[ 1027.832652] usb 5-2: device descriptor read/64, error -71
[ 1027.940729] usb usb5-port2: attempt power cycle
[ 1027.940752] usb usb5-port2: failed to disable port power
[ 1028.068755] usb 5-2: new full-speed USB device number 7 using uhci_hcd
[ 1028.484716] usb 5-2: device not accepting address 7, error -71
[ 1028.612666] usb 5-2: new full-speed USB device number 8 using uhci_hcd
[ 1029.028690] usb 5-2: device not accepting address 8, error -71
[ 1029.028749] usb usb5-port2: unable to enumerate USB device
[ 1065.768610] usb 5-2: new full-speed USB device number 9 using uhci_hcd
[ 1065.904680] usb 5-2: device descriptor read/64, error -71
[ 1066.148659] usb 5-2: device descriptor read/64, error -71
[ 1066.384629] usb 5-2: new full-speed USB device number 10 using uhci_hcd
[ 1066.520658] usb 5-2: device descriptor read/64, error -71
[ 1066.764680] usb 5-2: device descriptor read/64, error -71
[ 1066.872881] usb usb5-port2: attempt power cycle
[ 1066.872909] usb usb5-port2: failed to disable port power
[ 1067.000606] usb 5-2: new full-speed USB device number 11 using uhci_hcd
[ 1067.416602] usb 5-2: device not accepting address 11, error -71
[ 1067.544672] usb 5-2: new full-speed USB device number 12 using uhci_hcd
[ 1067.960664] usb 5-2: device not accepting address 12, error -71
[ 1067.960729] usb usb5-port2: unable to enumerate USB device
[ 1071.968692] usb 5-2: new full-speed USB device number 13 using uhci_hcd
[ 1072.154403] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[ 1072.154408] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1072.154412] usb 5-2: Product: CDC-ACM Demo
[ 1072.154415] usb 5-2: Manufacturer: Black Sphere Technologies
[ 1072.154418] usb 5-2: SerialNumber: DEMO
[ 1072.156460] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 1076.408843] usb 5-2: USB disconnect, device number 13
[ 1077.176655] usb 5-2: new full-speed USB device number 14 using uhci_hcd
[ 1095.528755] usb 5-2: new full-speed USB device number 15 using uhci_hcd
[ 1095.717402] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[ 1095.717410] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1095.717416] usb 5-2: Product: CDC-ACM Demo
[ 1095.717421] usb 5-2: Manufacturer: Black Sphere Technologies
[ 1095.717425] usb 5-2: SerialNumber: DEMO
[ 1095.719586] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 1406.696727] perf: interrupt took too long (6199 > 6180), lowering kernel.perf_event_max_sample_rate to 32250
[ 2814.396036] kauditd_printk_skb: 13 callbacks suppressed
[ 2814.396038] audit: type=1400 audit(1645567530.974:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=8952 comm="apparmor_parser"
[ 2814.397175] audit: type=1400 audit(1645567530.978:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=8952 comm="apparmor_parser"
[ 2834.731502] CE: hpet increased min_delta_ns to 20115 nsec
[ 3055.200879] usb 5-2: USB disconnect, device number 15
[ 3056.464748] usb 5-2: new full-speed USB device number 16 using uhci_hcd
[ 3056.657770] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[ 3056.657779] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3056.657784] usb 5-2: Product: CDC-ACM Demo
[ 3056.657789] usb 5-2: Manufacturer: Black Sphere Technologies
[ 3056.657793] usb 5-2: SerialNumber: DEMO
[ 3056.661207] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 3079.008804] usb 5-2: USB disconnect, device number 16
[ 3081.272810] usb 5-2: new full-speed USB device number 17 using uhci_hcd
[ 3081.461827] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[ 3081.461835] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3081.461842] usb 5-2: Product: CDC-ACM Demo
[ 3081.461847] usb 5-2: Manufacturer: Black Sphere Technologies
[ 3081.461851] usb 5-2: SerialNumber: DEMO
[ 3081.464929] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[ 3391.984896] usb 5-2: USB disconnect, device number 17
[ 3395.176713] usb 5-2: new full-speed USB device number 18 using uhci_hcd
[ 3395.312981] usb 5-2: device descriptor read/64, error -71
[ 3395.568727] usb 5-2: device descriptor read/64, error -71
[ 3395.804821] usb 5-2: new full-speed USB device number 19 using uhci_hcd
[ 3395.940692] usb 5-2: device descriptor read/64, error -71
[ 3396.184671] usb 5-2: device descriptor read/64, error -71
[ 3396.292855] usb usb5-port2: attempt power cycle
[ 3396.292880] usb usb5-port2: failed to disable port power
[ 3396.420721] usb 5-2: new full-speed USB device number 20 using uhci_hcd
[ 3396.836749] usb 5-2: device not accepting address 20, error -71
[ 3396.968728] usb 5-2: new full-speed USB device number 21 using uhci_hcd
[ 3397.388728] usb 5-2: device not accepting address 21, error -71
[ 3397.388796] usb usb5-port2: unable to enumerate USB device
[ 3740.200700] usb 5-2: new full-speed USB device number 23 using uhci_hcd
[ 3740.383586] usb 5-2: New USB device found, idVendor=04b4, idProduct=0008, bcdDevice= 0.01
[ 3740.383594] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3740.383599] usb 5-2: Product: CDC-ACM Demo
[ 3740.383604] usb 5-2: Manufacturer: Black Sphere Technologies
[ 3740.383608] usb 5-2: SerialNumber: DEMO
[ 3740.389675] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
reale@reale-XPS-M1330:~$

*Sent:* Tuesday, February 22, 2022 at 8:24 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
Try to access the device using the serial terminal.
Plug the device, find the serial port (type dmesg in the terminal, you will
see a message at the end of the output)
and use that in a serial terminal software (cutecom for example) and see if
it works.

On Sun, 20 Feb 2022 at 20:52, Francesco <realfran@...> wrote:

No, if I plug the USB cable from the NanoVNA to the PC and push the icon
to open the NanoSaver software, NOT open up.
If I unplug the USB cable the NanoSaver open up, I select SCAN Refresh and
NOT see the NanoVNA serial port.
*Sent:* Sunday, February 20, 2022 at 6:16 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
I'm sorry, I do not understand what you are trying to say.
You expect for NanoVNASaver to start on its own when you
plug in the NanoVNA?

On Sun, 20 Feb 2022 at 11:37, Francesco <realfran@...> wrote:

Yes, I install libreVNA with is on software and work, I cheek on
Mint/Ubuntu and give me the list of usb ports, I plug the NanoVNA and
give
me the Cypress USB driver is installed, *I give more detall* : when I
plug
the USB cable from the NanoVNA the Saver software not open, when I unplug
the cable open up, the problem is NanoSaver software don't open the USB
port.
I tray to put this information on the terminal but not result.
One other information I never use software terminal on my life.
Thank you for the help the only think I doing is "copy and past on the
terminal".
Best regards.
Francesco.
*Sent:* Sunday, February 20, 2022 at 3:39 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
AFAIK Saver does not support LibreVNA

On Sat, 19 Feb 2022 at 10:24, Francesco <realfran@...> wrote:

Hello, I install LibreVNA and work, I use the USB port for different
device and work, the only problem is NanoVNA-Saver is installed but not
find the the serial/usb device.
*Sent:* Saturday, February 19, 2022 at 4:36 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint



On Sat, 19 Feb 2022 at 01:22, Francesco <realfran@...> wrote:

Hello, I set up one laptop with Mint Linux "cinnamon" I install
NanoVNA
Saver I don't find the "device port" get a problem with the LiteVNA
and
the
NanoVNA V2 plus4.
Please some help, I'm computer illiterate and this is the first time
I
use
Linux (I'm lost) I install a lot of Python libraries and I get
confused
with the " CONSOLE "
Re: NanoSaver on ubuntu- mint

 

The bus 005 is the NanoVNA "I belive?
The Bus 005 Device 023: ID 04b4:0008 Cypress Semiconductor Corp. CDC-ACM Demo Bus 0
reale@reale-XPS-M1330:~$? lsusb
Bus 002 Device 003: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 0483:2016 STMicroelectronics Fingerprint Reader
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 023: ID 04b4:0008 Cypress Semiconductor Corp. CDC-ACM Demo
Bus 005 Device 004: ID 1c4f:0034 SiGma Micro Usb Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

*Sent:* Tuesday, February 22, 2022 at 8:24 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
Try to access the device using the serial terminal.
Plug the device, find the serial port (type dmesg in the terminal, you will
see a message at the end of the output)
and use that in a serial terminal software (cutecom for example) and see if
it works.

On Sun, 20 Feb 2022 at 20:52, Francesco <realfran@...> wrote:

No, if I plug the USB cable from the NanoVNA to the PC and push the icon
to open the NanoSaver software, NOT open up.
If I unplug the USB cable the NanoSaver open up, I select SCAN Refresh and
NOT see the NanoVNA serial port.
*Sent:* Sunday, February 20, 2022 at 6:16 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
I'm sorry, I do not understand what you are trying to say.
You expect for NanoVNASaver to start on its own when you
plug in the NanoVNA?

On Sun, 20 Feb 2022 at 11:37, Francesco <realfran@...> wrote:

Yes, I install libreVNA with is on software and work, I cheek on
Mint/Ubuntu and give me the list of usb ports, I plug the NanoVNA and
give
me the Cypress USB driver is installed, *I give more detall* : when I
plug
the USB cable from the NanoVNA the Saver software not open, when I unplug
the cable open up, the problem is NanoSaver software don't open the USB
port.
I tray to put this information on the terminal but not result.
One other information I never use software terminal on my life.
Thank you for the help the only think I doing is "copy and past on the
terminal".
Best regards.
Francesco.
*Sent:* Sunday, February 20, 2022 at 3:39 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
AFAIK Saver does not support LibreVNA

On Sat, 19 Feb 2022 at 10:24, Francesco <realfran@...> wrote:

Hello, I install LibreVNA and work, I use the USB port for different
device and work, the only problem is NanoVNA-Saver is installed but not
find the the serial/usb device.
*Sent:* Saturday, February 19, 2022 at 4:36 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint



On Sat, 19 Feb 2022 at 01:22, Francesco <realfran@...> wrote:

Hello, I set up one laptop with Mint Linux "cinnamon" I install
NanoVNA
Saver I don't find the "device port" get a problem with the LiteVNA
and
the
NanoVNA V2 plus4.
Please some help, I'm computer illiterate and this is the first time
I
use
Linux (I'm lost) I install a lot of Python libraries and I get
confused
with the " CONSOLE "
Re: NanoSaver on ubuntu- mint

 

Try to access the device using the serial terminal.
Plug the device, find the serial port (type dmesg in the terminal, you will
see a message at the end of the output)
and use that in a serial terminal software (cutecom for example) and see if
it works.

On Sun, 20 Feb 2022 at 20:52, Francesco <realfran@...> wrote:

No, if I plug the USB cable from the NanoVNA to the PC and push the icon
to open the NanoSaver software, NOT open up.
If I unplug the USB cable the NanoSaver open up, I select SCAN Refresh and
NOT see the NanoVNA serial port.
*Sent:* Sunday, February 20, 2022 at 6:16 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
I'm sorry, I do not understand what you are trying to say.
You expect for NanoVNASaver to start on its own when you
plug in the NanoVNA?

On Sun, 20 Feb 2022 at 11:37, Francesco <realfran@...> wrote:

Yes, I install libreVNA with is on software and work, I cheek on
Mint/Ubuntu and give me the list of usb ports, I plug the NanoVNA and
give
me the Cypress USB driver is installed, *I give more detall* : when I
plug
the USB cable from the NanoVNA the Saver software not open, when I unplug
the cable open up, the problem is NanoSaver software don't open the USB
port.
I tray to put this information on the terminal but not result.
One other information I never use software terminal on my life.
Thank you for the help the only think I doing is "copy and past on the
terminal".
Best regards.
Francesco.
*Sent:* Sunday, February 20, 2022 at 3:39 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
AFAIK Saver does not support LibreVNA

On Sat, 19 Feb 2022 at 10:24, Francesco <realfran@...> wrote:

Hello, I install LibreVNA and work, I use the USB port for different
device and work, the only problem is NanoVNA-Saver is installed but not
find the the serial/usb device.
*Sent:* Saturday, February 19, 2022 at 4:36 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint



On Sat, 19 Feb 2022 at 01:22, Francesco <realfran@...> wrote:

Hello, I set up one laptop with Mint Linux "cinnamon" I install
NanoVNA
Saver I don't find the "device port" get a problem with the LiteVNA
and
the
NanoVNA V2 plus4.
Please some help, I'm computer illiterate and this is the first time
I
use
Linux (I'm lost) I install a lot of Python libraries and I get
confused
with the " CONSOLE "
Re: Issue with nanoVNA-Saver in at least the last several versions.

cturnertuning
 

Alan, I wish to test a handful of collins 455 filters here. They are 2.1 wide. I see in your picture you are using some capacitors but cannot see the hookup. Could you please help me with the hookup from filter to the vna? What caps do I need? are the caps coupling caps? It looks like one runs to ground? Thank you. Clark
Re: Proper way to measure length of _Window_Line_?

 

Hi Kevin,

The real clue was in the Smith Chart plot you posted. I am really surprised that the Smith Chart gurus out there did not pick up on this straight away.
My expertise with Smith Charts is very basic, but here goes.

The plot shows the trace entirely within the upper Inductive hemisphere of the chart. An open circuit line longer than a quarter wave and shorter than a half wave will always look inductive.
Because your sweep started above the quarter wave frequency, the line was always longer than a quarter wavelength.

So your sweep frequency was never below the electrical quarter wavelength. As it did not cross the R centre line, the sweep never made it to a half wavelength either.

Referring back to Arie's post you quoted, virtually all cables will have a VF somewhere between 0.5 and 1.0. So the next time you want to do a sweep of a quarter wave stub using an unknown cable, start the sweep at half the stub frequency and finish 20-30% higher to ensure you have all bases covered.
In your case, had you started your sweep at 7MHz and finished at 17MHz, you would have seen your stub zero response. You could have then tightened the sweep up to get better resolution.

This thread has been an interesting ride, so thanks for posting your question. Good luck with the J.

73...Bob VK2ZRE
Re: Getting return loss #programming

 

On Mon, Feb 21, 2022 at 06:27 AM, Ron Spencer wrote:


Zahi

Not sure why no one gave you the direct, easy answer. Chose the log mag
display on your vna. That is return loss.
I think it was because the OP said >> "How can I get it? I'm using c# and rs232 communication."<< Most of us read that as he wanted to do serial communication between the NanoVNA and the computer.

Roger
Re: Proper way to measure length of _Window_Line_?

 

Bob, thanks so much for your very helpful response.

I apologize to everyone in the group that's participated in this discussion that I haven't responded much or quickly. I didn't realize that what I thought was an easy beginner's questions would be so involved. 'Life' has slowed down my responses (i.e, just spent the last two hours cleaning my printer so that I could file my state taxes).

If anyone's curious, my original task was to use the classic directions published in QST in Feb 2003 and Mar 2007 to build a folding J-Pole antenna. The first subroutine pushed on the stack was that I, also, was unable to buy 300 TV
twin-lead wire. Second item on the stack was to purchase the 300 ohm window wire, along with some similar 450 ohm window wire. Next item was to understand the original directions well enough to translate them to new dimensions for the wire I was able to obtain. Next item: the directions required that I know the velocity factor for the wire I have. That brought me to my original question to the group. What's the saying about "It's hard to remember you originally wanted to drain the swamp when you're up to your ass in alligators?"

I was able to make a measurement of the impedance of the 300 ohm window wire with the NanoVNA disconnected from my computer, and it made a tremendous difference. However, all I got was a Smith chart, with a very small pattern, I have to learn how to configure the NanoVNA, stand-alone without the computer, to display the VSWR versus frequency chart, to determine where my minimum is.

Thanks, again, to all who have taken the time and effort to respond. I'll be back with my results and status as soon as I get time.

-Kevin
KC3KZ
13201 - 13220 of 39687