Try to access the device using the serial terminal.
Plug the device, find the serial port (type dmesg in the terminal, you will
see a message at the end of the output)
and use that in a serial terminal software (cutecom for example) and see if
it works.
toggle quoted message
Show quoted text
On Sun, 20 Feb 2022 at 20:52, Francesco <realfran@...> wrote:
No, if I plug the USB cable from the NanoVNA to the PC and push the icon
to open the NanoSaver software, NOT open up.
If I unplug the USB cable the NanoSaver open up, I select SCAN Refresh and
NOT see the NanoVNA serial port.
*Sent:* Sunday, February 20, 2022 at 6:16 PM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
I'm sorry, I do not understand what you are trying to say.
You expect for NanoVNASaver to start on its own when you
plug in the NanoVNA?
On Sun, 20 Feb 2022 at 11:37, Francesco <realfran@...> wrote:
Yes, I install libreVNA with is on software and work, I cheek on
Mint/Ubuntu and give me the list of usb ports, I plug the NanoVNA and
give
me the Cypress USB driver is installed, *I give more detall* : when I
plug
the USB cable from the NanoVNA the Saver software not open, when I unplug
the cable open up, the problem is NanoSaver software don't open the USB
port.
I tray to put this information on the terminal but not result.
One other information I never use software terminal on my life.
Thank you for the help the only think I doing is "copy and past on the
terminal".
Best regards.
Francesco.
*Sent:* Sunday, February 20, 2022 at 3:39 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
AFAIK Saver does not support LibreVNA
On Sat, 19 Feb 2022 at 10:24, Francesco <realfran@...> wrote:
Hello, I install LibreVNA and work, I use the USB port for different
device and work, the only problem is NanoVNA-Saver is installed but not
find the the serial/usb device.
*Sent:* Saturday, February 19, 2022 at 4:36 AM
*From:* "Dragan Milivojevic" <d.milivojevic@...>
*To:* [email protected]
*Subject:* Re: [nanovna-users] NanoSaver on ubuntu- mint
On Sat, 19 Feb 2022 at 01:22, Francesco <realfran@...> wrote:
Hello, I set up one laptop with Mint Linux "cinnamon" I install
NanoVNA
Saver I don't find the "device port" get a problem with the LiteVNA
and
the
NanoVNA V2 plus4.
Please some help, I'm computer illiterate and this is the first time
I
use
Linux (I'm lost) I install a lot of Python libraries and I get
confused
with the " CONSOLE "
