开云体育

Just set one of the CH0 traces to "polar" format and you get R+/-JX display. The NanoVNA was designed for hobbyist use and the majority prefer the pF and nH format so they don't have to do the

Forgot the image..... On Mon, 20 Jan 2020 at 8:48 PM, Larry Rothman<nlroth@...> wrote: Yes, the android app sort-of doesn't need internet access, but it does because it was built using google

Yes, the android app sort-of doesn't need internet access, but it does because it was built using google tools and has google metrics crap in it. I use noroot firewall by greyshirts on my android

I second the motion on 90+% isopropyl alcohol. Maybe fluxes and flux removers have changed in the years since I last did a mass-produced RF product, but my past experience is that you want RF circuits

I think Glen's point was that labeling the reactance lines in pF and nH is breaking with history, industry standard and common sense. +/-JX is much more meaningful and intuitive than units of capacity

On Mon, Jan 20, 2020 at 04:18 PM, Lucio I?LYL wrote: " NanoVNA-H4 updated Firmware to the latest version as follows. 0.4.5-12-gea578a2 " ================================================= Changes to

Yes it is, but the web app working would show that communication to the nanovna works. You could also try the Serial USB Terminal app

well a couple of things,1 i thought this was supposed to run without the internet and 2 yes my otg cable can see and read a usb memory stick fine.

The only part of the Smith Chart that is purely resistive is the center horizontal line. Upward is inductive and downward from that line is capacitive. That's the advantage of the Smith Chart. Since

Make sure you are using an OTG Cable that tells the tablet to become a USB host. You can verify its in host mode if you're able to read a usb memory stick.? On Mon, 20 Jan 2020 at 6:06 PM,

NanoVNA-H4 updated Firmware to the latest version as follows. All right! ChibiOS/RT Shell ch> version 0.4.5-12-gea578a2 ch> info Kernel: 4.0.0 Compiler: GCC 8.3.1 20190703 (release) [gcc-8-branch

NanoVNA WebApp connects to my worse clone from Galaxy Note8 Android 8.0.0 as does Serial USB Terminal by Kai Morich a SMAYS powered hub connects by type C to Note8, and to NanoVNA by Type A to C

Really? I have used this method for years on a bunch of different Linux distros. Hold down Alt, left click and drag the window any way you want: up, down, sideways, whatever. Something ain't right

Thank you, thank you, thank you. Your instructions worked FB on Ubuntu 18.04 -Ed

Did you enable experimental web features? /g/nanovna-users/wiki#NanoVNA-Web-Client

added to /g/nanovna-users/wiki/Mods-and-Design-Notes#Modifications

I OftenUseCamelCase myself -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

No problem here plugging in the usb c cable! Also, I DO see some graphical 'remnants' on the screen from a previous scan..really not too bad though. 73 Glen K4KV

FYI Ordered via PayPal on Alibaba on 11th, arrived a little bit ago. First impressions are very good.? Very nice box. Did a CAL using my own sma standards.? Then checked 'known' good antennas. Did

linked in /g/nanovna-users/wiki#Help