开云体育

Dave, Too many! Because you get too much stray capacitance. Probably that choke with 22 turns on a huge toroid stack has so much capacitance that the capacitance dominates over the entire spectrum,

It's still in development, Hugen will manufacture it ... [email protected]> wrote:

Since the firmware was made a year ago, please update the firmware to the latest 1.0.45 so that you can use it with the latest software. NanoVNA-App v1.0.205. Read my website for details. -- *** If

You probably got a device from the first production, the fault of which was that the cover was pressed against the touch screen and due to constant pressure it could not log in either. What to do:

Where is Jan’s vna offered for sale? Thanks!

Hello, I have just bought a NanoVNA V2 called 3.2" "black and gold". As soon as arrived, I updated its firmware with the latest on NanoVNA website by NanoVNA-QT,

My new analyzer stucks when I turn it on. Touch Screen do not work. It generates error: si5351-init failed. What is wrong? Version 0.5.0 edy 555 Kernel: 5.1.0

I would suggest that the first step would be to Save the original calibration; which was carried out at the factory, saved into SAVE 0; into SAVE 4. (Zero is always loaded when first switched

Will the new models be capable of measuring crystal responses ? Quote : Note: All V2 versions switch on and off the test signal rapidly and can not measure crystals or be used as a signal

Good luck and have fun!

6ggz?

But if you were asking about V2N and V2N4, those were renamed to V2 plus and V2 plus4 and have been available since October of last year.

Manfred: We're not too far from Salt Lake City, Utah as far as shipping goes. I remember as a kid coming into this hobby some 50 to 60 years ago, I'd put together an order to Allied (on a paper

Just want to say hello and thank you, my new NanoVNA will be delivered later today. I have learned a lot about it's use already by downloading (and reading) the absolute beginners guide. I see so

In my suburban? location, the noise level on 80m and 40m is quite high and puts the AGC circuit into a non-linear range. rather than using a pre-amp, I use a 24dB attenuator which drops the noise

Hugen 6ggz

Hi Owo, any further updates on the new products mentioned at the beginning of this thread? Thanks!

I found the reference in the Cookbook. Thanks! -- Mike, W0IH

Dave, I'm green with envy! When I order something, I have to wait one month, AT LEAST, for it to arrive... That's the time it is retained by customs in my country. If they actually pick the parcel

Don't blindly trust that presentation! It contains serious errors! For example, it claims that when you take an air-core inductor and insert an iron core, the inductance will rise in direct