Looks like it is saved in the calibration settings not in the configuration settings.? That is what I had wrong.? Also, I want to confirm that you have to reset a channel before you save to it.? That seems to be the only way I have made the calibration stick.? Or I could be just missing something simple.? This thing is amazing for tuning an antenna manually with a T network.? It mostly follows the lines on the smith chart, with shunt inductance and series capacitance.? Then check with a redundant antenna analyzer and it is dead on the money at VSWR 1.01:1.
Thanks,
Chris Maness
toggle quoted message
Show quoted text
On 7/30/2021 2:03 PM, Christopher Maness via groups.io wrote:
I have version 1.0.45 Build Jan 30 2021
On Fri, Jul 30, 2021 at 12:07 PM Larry Rothman <nlroth@...> wrote:
Hi Chris,
Please let us know the model/version of Nano you have and the version of firmware from the Config>Version screen.
What you're doing should work as that is how I configure my unit.
Thanks
On Friday, July 30, 2021, 2:56:44 p.m. EDT, Christopher Maness <christopher.maness@...> wrote:
I want to save Trace 3 to do SWR instead of phase. Even though I save it
in a profile and the general settings. It always pops back to phase. How
do I make these changes permanent?
Also, when I want to save calibration settings, do I have to delete the old
ones first? That seems to be the case with mint unit.
Thanks Chris
