Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Save Trace Style and Channel?
|
I want to save Trace 3 to do SWR instead of phase. Even though I save it
in a profile and the general settings. It always pops back to phase. How do I make these changes permanent? Also, when I want to save calibration settings, do I have to delete the old ones first? That seems to be the case with mint unit. Thanks Chris |
|
Hi Chris,
toggle quoted message
Show quoted text
Please let us know the model/version of Nano you have and the version of firmware from the Config>Version screen. What you're doing should work as that is how I configure my unit. Thanks On Friday, July 30, 2021, 2:56:44 p.m. EDT, Christopher Maness <christopher.maness@...> wrote:
I want to save Trace 3 to do SWR instead of phase.? Even though I save it in a profile and the general settings.? It always pops back to phase.? How do I make these changes permanent? Also, when I want to save calibration settings, do I have to delete the old ones first?? That seems to be the case with mint unit. Thanks Chris |
|
I have version 1.0.45 Build Jan 30 2021
toggle quoted message
Show quoted text
On Fri, Jul 30, 2021 at 12:07 PM Larry Rothman <nlroth@...> wrote:
|
|
Looks like it is saved in the calibration settings not in the configuration settings.? That is what I had wrong.? Also, I want to confirm that you have to reset a channel before you save to it.? That seems to be the only way I have made the calibration stick.? Or I could be just missing something simple.? This thing is amazing for tuning an antenna manually with a T network.? It mostly follows the lines on the smith chart, with shunt inductance and series capacitance.? Then check with a redundant antenna analyzer and it is dead on the money at VSWR 1.01:1.
toggle quoted message
Show quoted text
Thanks, Chris Maness On 7/30/2021 2:03 PM, Christopher Maness via groups.io wrote:
I have version 1.0.45 Build Jan 30 2021 |
|
Chris,
toggle quoted message
Show quoted text
The only time you should use the Reset button in the Calibration menu is immediately prior to performing a calibration. Reset clears calibration entries in RAM so if you use it immediately before saving to a slot, you're saving cleared constants from RAM.? ...and yes, you should set your Freq range, reset & calibrate and save. Then, configure the traces and their functions and then save again back to the same storage slot.? You'll be able to recall without issue after that.? ... Larry On Fri., 30 Jul. 2021 at 5:41 p.m., Christopher Maness<christopher.maness@...> wrote: Looks like it is saved in the calibration settings not in the configuration settings.? That is what I had wrong.? Also, I want to confirm that you have to reset a channel before you save to it.? That seems to be the only way I have made the calibration stick.? Or I could be just missing something simple.? This thing is amazing for tuning an antenna manually with a T network.? It mostly follows the lines on the smith chart, with shunt inductance and series capacitance.? Then check with a redundant antenna analyzer and it is dead on the money at VSWR 1.01:1. Thanks, Chris Maness On 7/30/2021 2:03 PM, Christopher Maness via groups.io wrote:
I have version 1.0.45 Build Jan 30 2021 |
to navigate to use esc to dismiss