开云体育

Please look at??for the design files for the HiQSDR.

Jim
N2ADR

Hello Mike,

Please see the answer on the HL2 group. The short answer is to modify your main.c to remove the HF specific code.

Jim
N2ADR

I connect my HL2 to and HF antenna with PA enabled on the ANT jack and VHF transverter(s) using split IF at 28Mhz at about 0dBm using the new IOBoard Aux Rx and RF1 for the output. The PA needs to be disabled to make it work right on VHF.? The IO board with my customized firmware is handling the J9/J10 switch and band decoder output OK.??

I can disable it (and have Disable T/R in low power = true) in the Config menu but it would nice if it was automatically configured on Xvtr band change for seamless operation.? ?An example of this is the Thetis XVTR setup.? ?Not all transverters use low power IF drive so controlling it per band is most effective.? ?Along with that , per band, is option to set drive level as each can be different.

Regards,

- Mike K7MDL

I am using this version on a HL2 + IOBoard with a multiband transverter and it appears the RX frequency is not sent out in Quisk 4.2.23.?

When I went to TX then I got a valid band code and my Xvtr would shift to the correct band.? To work around this I modified my IO board firmware to make Rx_band = Tx_band for now.? Thetis HL2 is also not sending any of the 12 possbile RX freqs yet so this mod works for both apps.

Mike K7MDL

Maybe the 'WayBackMachine' aka the internet archive can help?



Nigel
G4ZAL

can you change the "--rig-name quisk" to something like "--rig-name radioa" and "--rig-name radiob" for different Linux (ubuntu) users ?
I need this for my antenna SNR comparision setup
Regards Joakim

Hello
Is it possible to change this.
in my Ubuntu the field is grayed and i can change the rigname so that wsjtx cant run a 2'nd instance (with another rig name)

I have searched the configuration files, tried to add option ti wsjtx command line and other things? - still no joy.

Thank you for a very nice program, im trying to build a antanne comparision dual reciever based on wsjtx SNR reports.?

regards Joakim, OZ1DUG

I could forward my files, as downloaded during construction. 73 Bob g3udi

Sorry Found it !!

Ordinarily, I would go to hiqsdr.org but that site doesn't seem active. We'll my old system crashed and everything related to my HiQSDR was lost.
Can anyone point be to an archive that holds all the hardware related docs to the HiQSDR pcb? Schematics, BOM, assembly instructions.

Many thanks,

Chuck Glasser

Yes, it's working in 4.2.23. Thanks!

I will fix this in the next release. The correct solution is:

dec = int(float(self.conf.rx_udp_clock) / rate + 0.5)

the removal of one "/".

Jim
N2ADR

Yes, I added +450 Hertz to correct my quartz oscillator. As a result, I have 122880450.

Hello Nick,

What is the value of "Clock frequency Hertz" on your radio hardware screen?

Jim
N2ADR

Quisk needs some sort of debug to find out why it's returning frequency incorrectly....

Mike W9MDB

Rig? You have lost me completely.

I don't find anything in the quisk config screens that would seem to relate to your question. AFAIK, quisk is the rig and it has one VFO.

Thanks yes that's it!?

I'll grab a newer version.?
My mind just kept reading it as 4.2.22 not 4.1.77.